Anal. Chem., 80 (4), 1316 -1322, 2008. 10.1021/ac071156l S0003-2700(07)01156-0
Web Release Date: January 15, 2008

Copyright © 2008 American Chemical Society

Ion-Selective Electrodes Using Carbon Nanotubes as Ion-to-Electron Transducers

Gastón A. Crespo, Santiago Macho, and F. Xavier Rius*

Department of Analytical and Organic Chemistry, Rovira i Virgili University, 43007 Tarragona, Spain

Received for review June 1, 2007. Accepted November 18, 2007.

Abstract:

This study developed a new type of all-solid-state ion-selective electrode based on a transducing layer of a network of single-walled carbon nanotubes. The extraordinary capacity of carbon nanotubes to promote electron transfer between heterogeneous phases made the presence of electroactive polymers or any other ion-to-electron-transfer promoter unnecessary. The new transducer layer was characterized by environmental scanning electron microscopy and electrochemical impedance spectroscopy. The stability of the electrical potential of the new solid-contact electrode was examined by performing current-reversal chronopotentiometry, and the influence of the interfacial water film was assessed by the potentiometric water layer test. The performance of the new electrode was evaluated by determining K+ with an ion-selective membrane that contained the well-known valinomycin ion carrier. The new electrode had a Nernstian slope (58.4 mV/decade), dynamic ranges of four logarithmic units, and selectivities and limits of detection comparable to other solid-contact electrodes. The short response time (less than 10 s for activities higher than 10-5.5 M) and the stability of the signal over several days makes these new electrodes very promising candidates for attaining true miniaturization.


Download the full text: PDF | HTML