Electrochemical Immunosensor for Detection of Celiac Disease Toxic Gliadin in Foodstuff

Hossam M. Nassef, M. Carmen Bermudo Redondo, Paul J. Ciclitira, H. Julia Ellis, Alex Fragoso* and Ciara K. O’Sullivan*§
Nanobiotechnology & Bioanalysis Group, Department of Chemical Engineering, Universitat Rovira i Virgili, Avinguda Països Catalans 26, 43007 Tarragona, Spain, Division of Nutritional Sciences, Rayne Institute, King’s College London, St. Thomas’ Hospital, Westminster Bridge Road, London SE1 7EH, U.K., and Institució Catalana de Recerca i Estudis Avançats (ICREA), Passeig Lluís Companys 23, 08010 barcelona, Spain
Anal. Chem., 2008, 80 (23), pp 9265–9271
DOI: 10.1021/ac801620j
Publication Date (Web): October 28, 2008
Copyright © 2008 American Chemical Society
* To whom correspondence should be addressed. E-mail: alex.fragoso@urv.cat; ciara.osullivan@urv.cat., †

Universitat Rovira i Virgili.

, ‡

King’s College London.

, §

Institució Catalana de Recerca i Estudis Avançats (ICREA).

Abstract

Celiac disease is a gluten-sensitive enteropathy that affects as much as 1% of the population. Patients with celiac disease should maintain a lifelong gluten-free diet, in order to avoid serious complications and consequences. It is essential to have methods of analysis to reliably control the contents of gluten-free foods, and there is a definitive need for an assay that is easy to use, and can be used on site, to facilitate the rapid testing of incoming raw materials or monitoring for gluten contamination, by industries generating gluten-free foods. Here, we report on the development of an electrochemical immunosensor exploiting an antibody raised against the putative immunodominant celiac disease epitope, for the measurement of gliadin content and potential celiac toxicity of a foodstuff. To develop the gliadin immunosensor, we explored the use of two surface chemistries, based on the use of dithiols, 22-(3,5-bis((6-mercaptohexyl)oxy)phenyl)-3,6,9,12,15,18,21-heptaoxadocosanoic acid (1) and 1,2-dithiolane-3-pentanoic acid (thioctic acid) (2), for anchoring of the capture antibody. The different surface chemistries were evaluated in terms of time required for formation of self-assembled monolayers, stability, susceptibility to nonspecific binding, reproducibility, and sensitivity. The thioctic acid self-assembled monolayer took more than 100 h to attain a stable surface and rapidly destabilized following functionalization with capture antibody, while the heptaoxadocosanoic acid surface rapidly formed (less than 3 h) and was stable for at least 5 days, stored at room temperature, following antibody immobilization. Both surface chemistries gave rise to highly sensitive immunosensors, with detection limits of 5.5 and 11.6 ng/mL being obtained for 1 and 2, respectively, with nonspecific binding of just 2.7% of the specific signal attained. The immunosensors were extremely reproducible, with RSD of 5.2 and 6.75% obtained for 1 and 2 (n = 5, 30 ng/mL), respectively. Finally, the immunosensor was applied to the analysis of commercial gluten-free and gluten-containing raw and processed foodstuffs, and excellent correlation achieved when its performance compared to that of an ELISA.

Tools

SciFinder Links

SciFinder subscribers:  Click to sign in | Not a SciFinder subscriber? Learn more at www.cas.org

Explore by:


History

  • Published In Issue December 01, 2008
  • Article ASAPOctober 29, 2008
  • Received: July 31, 2008
    Accepted: September 29, 2008

Recommend & Share

  • Share on ACS NetworkACS Network
  • Add to FacebookFacebook
  • Tweet ThisTweet This
  • Add to CiteULikeCiteULike
  • Add to NewsvineNewsvine
  • Digg ThisDigg This
  • Add to DeliciousDelicious

Related Content

Other ACS content by these authors: