Enhanced Redifferentiation of Chondrocytes on Microperiodic Silk/Gelatin Scaffolds: Toward Tailor-Made Tissue Engineering
- Sanskrita Das
- ,
- Falguni Pati
- ,
- Shibu Chameettachal
- ,
- Shikha Pahwa
- ,
- Alok R. Ray
- ,
- Santanu Dhara
- , and
- Sourabh Ghosh
Abstract
Direct-write assembly allows rapid fabrication of complex three-dimensional (3D) architectures, such as scaffolds simulating anatomical shapes, avoiding the need for expensive lithographic masks. However, proper selection of polymeric ink composition and tailor-made viscoelastic properties are critically important for smooth deposition of ink and shape retention. Deposition of only silk solution leads to frequent clogging due to shear-induced β-sheet crystallization, whereas optimized viscoelastic property of silk-gelatin blends facilitate the flow of these blends through microcapillary nozzles of varying diameter. This study demonstrates that induction of controlled changes in scaffold surface chemistry, by optimizing silk-gelatin ratio, can govern cell proliferation and maintenance of chondrocyte morphology. Microperiodic silk-gelatin scaffolds can influence postexpansion redifferentiation of goat chondrocytes by enhancing Sox-9 gene expression, aggregation, and driving cartilage matrix production, as evidenced by upregulation of collagen type II and aggrecan expression. The strategy for optimizing redifferentiation of chondrocytes can offer valuable consideration in scaffold-based cartilage repair strategies.
Cited By
This article is cited by 104 publications.
- Soumitra Das, Jeyapriya Thimukonda Jegadeesan, Bikramjit Basu. Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status. Biomacromolecules 2024, 25
(4)
, 2156-2221. https://doi.org/10.1021/acs.biomac.3c01271
- Nilotpal Majumder, Chandrashish Roy, Laura Doenges, Ivan Martin, Andrea Barbero, Sourabh Ghosh. Covalent Conjugation of Small Molecule Inhibitors and Growth Factors to a Silk Fibroin-Derived Bioink to Develop Phenotypically Stable 3D Bioprinted Cartilage. ACS Applied Materials & Interfaces 2024, 16
(8)
, 9925-9943. https://doi.org/10.1021/acsami.3c18903
- Shinji Sakai, Takahiro Morita. One-Step FRESH Bioprinting of Low-Viscosity Silk Fibroin Inks. ACS Biomaterials Science & Engineering 2022, 8
(6)
, 2589-2597. https://doi.org/10.1021/acsbiomaterials.2c00269
- Asish Kumar Panda, Bikramjit Basu. Functionalized Fluoropolymer-Compatibilized Elastomeric Bilayer Composites for Osteochondral Repair: Unraveling the Role of Substrate Stiffness and Functionalities. ACS Applied Bio Materials 2021, 4
(12)
, 8543-8558. https://doi.org/10.1021/acsabm.1c01021
- Diego Trucco, Aarushi Sharma, Cristina Manferdini, Elena Gabusi, Mauro Petretta, Giovanna Desando, Leonardo Ricotti, Juhi Chakraborty, Sourabh Ghosh, Gina Lisignoli. Modeling and Fabrication of Silk Fibroin–Gelatin-Based Constructs Using Extrusion-Based Three-Dimensional Bioprinting. ACS Biomaterials Science & Engineering 2021, 7
(7)
, 3306-3320. https://doi.org/10.1021/acsbiomaterials.1c00410
- Juhi Chakraborty, Sourabh Ghosh. Cellular Proliferation, Self-Assembly, and Modulation of Signaling Pathways in Silk Fibroin Gelatin-Based 3D Bioprinted Constructs. ACS Applied Bio Materials 2020, 3
(12)
, 8309-8320. https://doi.org/10.1021/acsabm.0c01252
- Sheng Xu, Qingtao Li, Haotian Pan, Qiyuan Dai, Qi Feng, Chenxi Yu, Xiaohua Zhang, Zhibin Liang, Hua Dong, Xiaodong Cao. Tubular Silk Fibroin/Gelatin-Tyramine Hydrogel with Controllable Layer Structure and Its Potential Application for Tissue Engineering. ACS Biomaterials Science & Engineering 2020, 6
(12)
, 6896-6905. https://doi.org/10.1021/acsbiomaterials.0c01183
- Yogendra
Pratap Singh, Ashutosh Bandyopadhyay, Biman B. Mandal. 3D Bioprinting Using Cross-Linker-Free Silk–Gelatin Bioink for Cartilage Tissue Engineering. ACS Applied Materials & Interfaces 2019, 11
(37)
, 33684-33696. https://doi.org/10.1021/acsami.9b11644
- Aarushi Sharma, Giovanna Desando, Mauro Petretta, Shikha Chawla, Isabella Bartolotti, Cristina Manferdini, Francesca Paolella, Elena Gabusi, Diego Trucco, Sourabh Ghosh, Gina Lisignoli. Investigating the Role of Sustained Calcium Release in Silk-Gelatin-Based Three-Dimensional Bioprinted Constructs for Enhancing the Osteogenic Differentiation of Human Bone Marrow Derived Mesenchymal Stromal Cells. ACS Biomaterials Science & Engineering 2019, 5
(3)
, 1518-1533. https://doi.org/10.1021/acsbiomaterials.8b01631
- Kulwinder Kaur, Sanskrita Das, Sourabh Ghosh. Regulation of Human Osteoblast-to-Osteocyte Differentiation by Direct-Write 3D Microperiodic Hydroxyapatite Scaffolds. ACS Omega 2019, 4
(1)
, 1504-1515. https://doi.org/10.1021/acsomega.8b03272
- Jun Zhang, Benjamin J. Allardyce, Rangam Rajkhowa, Yan Zhao, Rodney J. Dilley, Sharon L. Redmond, Xungai Wang, Xin Liu. 3D Printing of Silk Particle-Reinforced Chitosan Hydrogel Structures and Their Properties. ACS Biomaterials Science & Engineering 2018, 4
(8)
, 3036-3046. https://doi.org/10.1021/acsbiomaterials.8b00804
- Allison M. Pekkanen, Ryan J. Mondschein, Christopher B. Williams, and Timothy E. Long . 3D Printing Polymers with Supramolecular Functionality for Biological Applications. Biomacromolecules 2017, 18
(9)
, 2669-2687. https://doi.org/10.1021/acs.biomac.7b00671
- Matthew B. Dickerson, Patrick B. Dennis, Vincent P. Tondiglia, Lloyd J. Nadeau, Kristi M. Singh, Lawrence F. Drummy, Benjamin P. Partlow, Dean P. Brown, Fiorenzo G. Omenetto, David L. Kaplan, and Rajesh R. Naik . 3D Printing of Regenerated Silk Fibroin and Antibody-Containing Microstructures via Multiphoton Lithography. ACS Biomaterials Science & Engineering 2017, 3
(9)
, 2064-2075. https://doi.org/10.1021/acsbiomaterials.7b00338
- Ashley M. Compaan, Kyle Christensen, and Yong Huang . Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate. ACS Biomaterials Science & Engineering 2017, 3
(8)
, 1519-1526. https://doi.org/10.1021/acsbiomaterials.6b00432
- Shibu Chameettachal, Swati Midha, and Sourabh Ghosh . Regulation of Chondrogenesis and Hypertrophy in Silk Fibroin-Gelatin-Based 3D Bioprinted Constructs. ACS Biomaterials Science & Engineering 2016, 2
(9)
, 1450-1463. https://doi.org/10.1021/acsbiomaterials.6b00152
- M. Selvakumar, Priyanka Srivastava, Harpreet Singh Pawar, Nimmy K. Francis, Bodhisatwa Das, G. Sathishkumar, Bhuvaneshwaran Subramanian, Saravana Kumar Jaganathan, Gibin George, S. Anandhan, Santanu Dhara, Golok B. Nando, and Santanu Chattopadhyay . On-Demand Guided Bone Regeneration with Microbial Protection of Ornamented SPU Scaffold with Bismuth-Doped Single Crystalline Hydroxyapatite: Augmentation and Cartilage Formation. ACS Applied Materials & Interfaces 2016, 8
(6)
, 4086-4100. https://doi.org/10.1021/acsami.5b11723
- Tomasz Jungst, Willi Smolan, Kristin Schacht, Thomas Scheibel, and Jürgen Groll . Strategies and Molecular Design Criteria for 3D Printable Hydrogels. Chemical Reviews 2016, 116
(3)
, 1496-1539. https://doi.org/10.1021/acs.chemrev.5b00303
- Priyanka Dubey, Sumit Murab, Sandip Karmakar, Pramit K. Chowdhury, and Sourabh Ghosh . Modulation of Self-Assembly Process of Fibroin: An Insight for Regulating the Conformation of Silk Biomaterials. Biomacromolecules 2015, 16
(12)
, 3936-3944. https://doi.org/10.1021/acs.biomac.5b01258
- Maumita Bhattacharjee, Shibu Chameettachal, Shikha Pahwa, Alok R. Ray, and Sourabh Ghosh . Strategies for Replicating Anatomical Cartilaginous Tissue Gradient in Engineered Intervertebral Disc. ACS Applied Materials & Interfaces 2014, 6
(1)
, 183-193. https://doi.org/10.1021/am403835t
- Fang Wang Catherine Yang Xiao Hu . Advanced Protein Composite Materials. 2014, 177-208. https://doi.org/10.1021/bk-2014-1175.ch011
- Ali Sadeghianmaryan, Nivad Ahmadian, Sydney Wheatley, Hamed Alizadeh Sardroud, Seyyed Ahmad Seyyed Nasrollah, Emad Naseri, Ali Ahmadi. Advancements in 3D-printable polysaccharides, proteins, and synthetic polymers for wound dressing and skin scaffolding – A review. International Journal of Biological Macromolecules 2024, 266 , 131207. https://doi.org/10.1016/j.ijbiomac.2024.131207
- Seo Hyung Moon, Tae Yoon Park, Hyung Joon Cha, Yun Jung Yang. Photo-/thermo-responsive bioink for improved printability in extrusion-based bioprinting. Materials Today Bio 2024, 25 , 100973. https://doi.org/10.1016/j.mtbio.2024.100973
- Nilotpal Majumder, Subhadeep Roy, Aarushi Sharma, Shuchi Arora, Raju Vaishya, Amitabha Bandyopadhyay, Sourabh Ghosh. Assessing the advantages of 3D bioprinting and 3D spheroids in deciphering the osteoarthritis healing mechanism using human chondrocytes and polarized macrophages. Biomedical Materials 2024, 19
(2)
, 025005. https://doi.org/10.1088/1748-605X/ad1d18
- Juhi Chakraborty, Julia Fernández-Pérez, Milad Takhsha Ghahfarokhi, Kenny A. van Kampen, Tim ten Brink, Jopeth Ramis, Maria Kalogeropoulou, Riccardo Cabassi, César de Julián Fernández, Franca Albertini, Carlos Mota, Sourabh Ghosh, Lorenzo Moroni. Development of 4D-bioprinted shape-morphing magnetic constructs for cartilage regeneration using a silk fibroin-gelatin bioink. Cell Reports Physical Science 2024, 5
(3)
, 101819. https://doi.org/10.1016/j.xcrp.2024.101819
- Arka Sanyal, Bhagyashree Bhattacharyya, Sourabh Ghosh. Three-dimensional bioprinting of articular cartilage using silk fibroin–gelatin bioink. 2024, 513-548. https://doi.org/10.1016/B978-0-323-96017-5.00001-7
- Niranjana Jaya Prakash, Xungai Wang, Balasubramanian Kandasubramanian. Regenerated silk fibroin loaded with natural additives: a sustainable approach towards health care. Journal of Biomaterials Science, Polymer Edition 2023, 34
(10)
, 1453-1490. https://doi.org/10.1080/09205063.2023.2170137
- Qingtong Yu, Qilong Wang, Linzhi Zhang, Wenwen Deng, Xia Cao, Zhe Wang, Xuan Sun, Jiangnan Yu, Ximing Xu. The applications of 3D printing in wound healing: The external delivery of stem cells and antibiosis. Advanced Drug Delivery Reviews 2023, 197 , 114823. https://doi.org/10.1016/j.addr.2023.114823
- Ravindra V. Badhe, Abhinav Chatterjee, Divya Bijukumar, Mathew T. Mathew. Current advancements in bio-ink technology for cartilage and bone tissue engineering. Bone 2023, 171 , 116746. https://doi.org/10.1016/j.bone.2023.116746
- Panchami Patel, Kratika Mujmer, Vinod Kumar Aswal, Sharad Gupta, Prachi Thareja. Structure, rheology, and 3D printing of salt-induced κ-carrageenan gels. Materials Today Communications 2023, 35 , 105807. https://doi.org/10.1016/j.mtcomm.2023.105807
- Jeevithan Elango, Artiom Lijnev, Camilo Zamora-Ledezma, Frank Alexis, Wenhui Wu, José Manuel Granero Marín, Jose Eduardo Mate Sanchez de Val. The relationship of rheological properties and the performance of silk fibroin hydrogels in tissue engineering application. Process Biochemistry 2023, 125 , 198-211. https://doi.org/10.1016/j.procbio.2022.12.012
- Sayak Mitra, Priyanjali Bhattacharya, Shampa Sen, Trupti N. Patel. Protein-based composites and their applications. 2023, 205-250. https://doi.org/10.1016/B978-0-323-95183-8.00006-8
- Fatma Nur Parın. 3D and 4D Bioprinting Technology for Tissue Engineering Applications. 2023, 213-250. https://doi.org/10.1007/978-981-99-2119-5_9
- Juhi Chakraborty, Nilotpal Majumder, Aarushi Sharma, Sukanya Prasad, Sourabh Ghosh. 3D bioprinted silk-reinforced Alginate-Gellan Gum constructs for cartilage regeneration. Bioprinting 2022, 28 , e00232. https://doi.org/10.1016/j.bprint.2022.e00232
- Nilotpal Majumder, Aditya Mishra, Sourabh Ghosh. Effect of varying cell densities on the rheological properties of the bioink. Bioprinting 2022, 28 , e00241. https://doi.org/10.1016/j.bprint.2022.e00241
- Monalisa Kalita, Benjamin J. Allardyce, Kamatchi Sankaranarayanan, Dipali Devi, Rangam Rajkhowa. Sericin from mulberry and non-mulberry silk using chemical-free degumming. The Journal of The Textile Institute 2022, 113
(10)
, 2080-2089. https://doi.org/10.1080/00405000.2021.1964766
- Gabriele Griffanti, Showan N. Nazhat. Three-Dimensional Bioprinting of Naturally Derived Protein-Based Biopolymers. 2022, 363-377. https://doi.org/10.31399/asm.hb.v23A.a0006894
- Shengzhi Zou, Suna Fan, Ana L. Oliveira, Xiang Yao, Yaopeng Zhang, Huili Shao. 3D Printed Gelatin Scaffold with Improved Shape Fidelity and Cytocompatibility by Using Antheraea pernyi Silk Fibroin Nanofibers. Advanced Fiber Materials 2022, 4
(4)
, 758-773. https://doi.org/10.1007/s42765-022-00135-w
- Seo Hyung Moon, Ha Neui Choi, Yun Jung Yang. Natural/Synthetic Polymer Materials for Bioink Development. Biotechnology and Bioprocess Engineering 2022, 27
(4)
, 482-493. https://doi.org/10.1007/s12257-021-0418-1
- Juhi Chakraborty, Xuan Mu, Ankita Pramanick, David L. Kaplan, Sourabh Ghosh. Recent advances in bioprinting using silk protein-based bioinks. Biomaterials 2022, 287 , 121672. https://doi.org/10.1016/j.biomaterials.2022.121672
- Yi Huang, Guangdong Sun, Lingling Lyu, Yongqiang Li, Dapeng Li, Qinguo Fan, Juming Yao, Jianzhong Shao. Dityrosine-inspired photocrosslinking technique for 3D printing of silk fibroin-based composite hydrogel scaffolds. Soft Matter 2022, 18
(19)
, 3705-3712. https://doi.org/10.1039/D1SM01817E
- Sumi Choi, Hyerin Ahn, Su‐Hwan Kim. Tyrosinase‐mediated hydrogel crosslinking for tissue engineering. Journal of Applied Polymer Science 2022, 139
(14)
https://doi.org/10.1002/app.51887
- Filippo Valente, Matt S. Hepburn, Jingyu Chen, Ana A. Aldana, Benjamin J. Allardyce, Sajjad Shafei, Barry J. Doyle, Brendan F. Kennedy, Rodney J. Dilley. Bioprinting silk fibroin using two-photon lithography enables control over the physico-chemical material properties and cellular response. Bioprinting 2022, 25 , e00183. https://doi.org/10.1016/j.bprint.2021.e00183
- Menglu Zhao, Danlei Yang, Suna Fan, Xiang Yao, Jiexin Wang, Meifang Zhu, Yaopeng Zhang. 3D‐Printed Strong Dental Crown with Multi‐Scale Ordered Architecture, High‐Precision, and Bioactivity. Advanced Science 2022, 9
(5)
https://doi.org/10.1002/advs.202104001
- . Direct Ink Writing for
3D
Bioprinting Applications. 2022, 113-147. https://doi.org/10.1002/9783527828593.ch6
- Katarzyna Klimek, Marta Tarczynska, Wieslaw Truszkiewicz, Krzysztof Gaweda, Timothy E. L. Douglas, Grazyna Ginalska. Freeze-Dried Curdlan/Whey Protein Isolate-Based Biomaterial as Promising Scaffold for Matrix-Associated Autologous Chondrocyte Transplantation—A Pilot In-Vitro Study. Cells 2022, 11
(2)
, 282. https://doi.org/10.3390/cells11020282
- Menglu Zhao, Yanan Geng, Suna Fan, Xiang Yao, Meifang Zhu, Yaopeng Zhang. 3D-printed strong hybrid materials with low shrinkage for dental restoration. Composites Science and Technology 2021, 213 , 108902. https://doi.org/10.1016/j.compscitech.2021.108902
- Yue Wang, Jiahui Li, Yunfeng Li, Bai Yang. Biomimetic bioinks of nanofibrillar polymeric hydrogels for 3D bioprinting. Nano Today 2021, 39 , 101180. https://doi.org/10.1016/j.nantod.2021.101180
- Yeong-Jin Choi, Honghyun Park, Dong-Heon Ha, Hui-Suk Yun, Hee-Gyeong Yi, Hyungseok Lee. 3D Bioprinting of In Vitro Models Using Hydrogel-Based Bioinks. Polymers 2021, 13
(3)
, 366. https://doi.org/10.3390/polym13030366
- Xiao Zhang, Yang Liu, Chunyang Luo, Chenjun Zhai, Zuxi Li, Yi Zhang, Tao Yuan, Shilei Dong, Jiyong Zhang, Weimin Fan. Crosslinker-free silk/decellularized extracellular matrix porous bioink for 3D bioprinting-based cartilage tissue engineering. Materials Science and Engineering: C 2021, 118 , 111388. https://doi.org/10.1016/j.msec.2020.111388
- Li Huang, Wei Yuan, Yue Hong, Suna Fan, Xiang Yao, Tao Ren, Lujie Song, Gesheng Yang, Yaopeng Zhang. 3D printed hydrogels with oxidized cellulose nanofibers and silk fibroin for the proliferation of lung epithelial stem cells. Cellulose 2021, 28
(1)
, 241-257. https://doi.org/10.1007/s10570-020-03526-7
- Lobat Tayebi, Reza Masaeli, Kavosh Zandsalimi. 3D Printing Methods Applicable in Oral and Maxillofacial Surgery. 2021, 11-60. https://doi.org/10.1007/978-3-030-77787-6_2
- Radhika Batra, Roli Purwar. Deduction of a facile method to construct
Antheraea mylitta
silk fibroin/gelatin blend films for prospective biomedical applications. Polymer International 2021, 70
(1)
, 73-82. https://doi.org/10.1002/pi.6087
- Gaurav Kulkarni, Preetam Guha Ray, Prasanna Kumar Byram, Manish Kaushal, Santanu Dhara, Soumen Das. Tailorable hydrogel of gelatin with silk fibroin and its activation/crosslinking for enhanced proliferation of fibroblast cells. International Journal of Biological Macromolecules 2020, 164 , 4073-4083. https://doi.org/10.1016/j.ijbiomac.2020.09.016
- JunJie Yu, Su A Park, Wan Doo Kim, Taeho Ha, Yuan-Zhu Xin, JunHee Lee, Donghyun Lee. Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering. Polymers 2020, 12
(12)
, 2958. https://doi.org/10.3390/polym12122958
- Manuele Gori, Sara M. Giannitelli, Miranda Torre, Pamela Mozetic, Franca Abbruzzese, Marcella Trombetta, Enrico Traversa, Lorenzo Moroni, Alberto Rainer. Biofabrication of Hepatic Constructs by 3D Bioprinting of a Cell‐Laden Thermogel: An Effective Tool to Assess Drug‐Induced Hepatotoxic Response. Advanced Healthcare Materials 2020, 9
(21)
https://doi.org/10.1002/adhm.202001163
- Danielle L Heichel, Julia A Tumbic, Marisa E Boch, Anson W K Ma, Kelly A Burke. Silk fibroin reactive inks for 3D printing crypt-like structures. Biomedical Materials 2020, 15
(5)
, 055037. https://doi.org/10.1088/1748-605X/ab99d4
- Xiaolin Cui, Jun Li, Yusak Hartanto, Mitchell Durham, Junnan Tang, Hu Zhang, Gary Hooper, Khoon Lim, Tim Woodfield. Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel‐Based Bioinks. Advanced Healthcare Materials 2020, 9
(15)
https://doi.org/10.1002/adhm.201901648
- Clara L Hedegaard, Alvaro Mata. Integrating self-assembly and biofabrication for the development of structures with enhanced complexity and hierarchical control. Biofabrication 2020, 12
(3)
, 032002. https://doi.org/10.1088/1758-5090/ab84cb
- Zhuangzhuang Wen, Fujian Jiang, Feng Wu, Zhuping Yin, Kulwinder Kaur, Juhi Chakraborty, Sourabh Ghosh, Shenzhou Lu. Photocurable silk fibroin- polyvinylpyrrolidone hydrogel. Materialia 2020, 9 , 100525. https://doi.org/10.1016/j.mtla.2019.100525
- Onur Hasturk, Kathryn E. Jordan, Jaewon Choi, David L. Kaplan. Enzymatically crosslinked silk and silk-gelatin hydrogels with tunable gelation kinetics, mechanical properties and bioactivity for cell culture and encapsulation. Biomaterials 2020, 232 , 119720. https://doi.org/10.1016/j.biomaterials.2019.119720
- Benu George, Nidhi Lal, Jeyaram R. Damodaran, T. V. Suchithra. Tissue Engineering and Regenerative Medicines: An Interdisciplinary Understanding. 2020, 409-438. https://doi.org/10.1007/978-981-15-2195-9_27
- Prachi Dhavalikar, Ziyang Lan, Ronit Kar, Karim Salhadar, Akhilesh K. Gaharwar, Elizabeth Cosgriff-Hernandez. Biomedical Applications of Additive Manufacturing. 2020, 623-639. https://doi.org/10.1016/B978-0-12-816137-1.00040-4
- Li Huang, Xiaoyu Du, Suna Fan, Gesheng Yang, Huili Shao, Dejian Li, Chengbo Cao, Yufang Zhu, Meifang Zhu, Yaopeng Zhang. Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores. Carbohydrate Polymers 2019, 221 , 146-156. https://doi.org/10.1016/j.carbpol.2019.05.080
- Xiaoyu Du, Daixu Wei, Li Huang, Min Zhu, Yaopeng Zhang, Yufang Zhu. 3D printing of mesoporous bioactive glass/silk fibroin composite scaffolds for bone tissue engineering. Materials Science and Engineering: C 2019, 103 , 109731. https://doi.org/10.1016/j.msec.2019.05.016
- Jun Zhang, Benjamin J. Allardyce, Rangam Rajkhowa, Sanjeeb Kalita, Rodney J. Dilley, Xungai Wang, Xin Liu. Silk particles, microfibres and nanofibres: A comparative study of their functions in 3D printing hydrogel scaffolds. Materials Science and Engineering: C 2019, 103 , 109784. https://doi.org/10.1016/j.msec.2019.109784
- Dajiang Kuang, Fujian Jiang, Feng Wu, Kulwinder Kaur, Sourabh Ghosh, Subhas C. Kundu, Shenzhou Lu. Highly elastomeric photocurable silk hydrogels. International Journal of Biological Macromolecules 2019, 134 , 838-845. https://doi.org/10.1016/j.ijbiomac.2019.05.068
- Li‐Bo Jiang, Di‐Han Su, Sheng‐Long Ding, Qi‐Chen Zhang, Ze‐Fang Li, Fan‐Cheng Chen, Wang Ding, Shu‐Tian Zhang, Jian Dong. Salt‐Assisted Toughening of Protein Hydrogel with Controlled Degradation for Bone Regeneration. Advanced Functional Materials 2019, 29
(26)
https://doi.org/10.1002/adfm.201901314
- Swati Midha, Manu Dalela, Deborah Sybil, Prabir Patra, Sujata Mohanty. Advances in three‐dimensional bioprinting of bone: Progress and challenges. Journal of Tissue Engineering and Regenerative Medicine 2019, 12 https://doi.org/10.1002/term.2847
- Priyanka Dubey, Pramit K. Chowdhury, Sourabh Ghosh. Modulation of aggregation of silk fibroin by synergistic effect of the complex of curcumin and β-cyclodextrin. Biochimica et Biophysica Acta (BBA) - Proteins and Proteomics 2019, 1867
(4)
, 416-425. https://doi.org/10.1016/j.bbapap.2019.01.009
- Archna Dhasmana, Lubhan Singh, Partha Roy, Narayan Chandra Mishra. Silk fibroin protein modified acellular dermal matrix for tissue repairing and regeneration. Materials Science and Engineering: C 2019, 97 , 313-324. https://doi.org/10.1016/j.msec.2018.12.038
- Xiaofang Wu, Kai Chen, Dekun Zhang, Linmin Xu, Xuehui Yang. Study on the technology and properties of 3D bioprinting SF/GT/n-HA composite scaffolds. Materials Letters 2019, 238 , 89-92. https://doi.org/10.1016/j.matlet.2018.11.151
- Apoorva Goel, Mukesh Kumar Meher, Khushboo Gulati, Krishna Mohan Poluri. Fabrication of Biopolymer-Based Organs and Tissues Using 3D Bioprinting. 2019, 43-62. https://doi.org/10.1016/B978-0-12-815890-6.00003-7
- Chinmaya Mahapatra, Jung-Ju Kim, Jung-Hwan Lee, Guang-Zhen Jin, Jonathan C Knowles, Hae-Won Kim. Differential chondro- and osteo-stimulation in three-dimensional porous scaffolds with different topological surfaces provides a design strategy for biphasic osteochondral engineering. Journal of Tissue Engineering 2019, 10 , 204173141982643. https://doi.org/10.1177/2041731419826433
- Kanyaluk Kaewprasit, Takaomi Kobayashi, Siriporn Damrongsakkul. Thai silk fibroin gelation process enhancing by monohydric and polyhydric alcohols. International Journal of Biological Macromolecules 2018, 118 , 1726-1735. https://doi.org/10.1016/j.ijbiomac.2018.07.017
- Swati Midha, Sumit Kumar, Aarushi Sharma, Kulwinder Kaur, Xiaomeng Shi, Parichart Naruphontjirakul, Julian R Jones, Sourabh Ghosh. Silk fibroin-bioactive glass based advanced biomaterials: towards patient-specific bone grafts. Biomedical Materials 2018, 13
(5)
, 055012. https://doi.org/10.1088/1748-605X/aad2a9
- Priyanka Dubey, Sourabh Ghosh, Sauradipta Banerjee. WITHDRAWN: Synergistic Effect of Curcumin and β-cyclodextrin on Inhibition of Silk Fibroin Self Assembly. Archives of Biochemistry and Biophysics 2018, https://doi.org/10.1016/j.abb.2018.08.010
- Leng-Duei Koh, Jingjie Yeo, Yeong Yuh Lee, Qunya Ong, Mingyong Han, Benjamin C-K. Tee. Advancing the frontiers of silk fibroin protein-based materials for futuristic electronics and clinical wound-healing (Invited review). Materials Science and Engineering: C 2018, 86 , 151-172. https://doi.org/10.1016/j.msec.2018.01.007
- Shikha Chawla, Swati Midha, Aarushi Sharma, Sourabh Ghosh. Silk‐Based Bioinks for 3D Bioprinting. Advanced Healthcare Materials 2018, 7
(8)
https://doi.org/10.1002/adhm.201701204
- Soon Mo Choi, Prerna Chaudhry, Sun Mi Zo, Sung Soo Han. Advances in Protein-Based Materials: From Origin to Novel Biomaterials. 2018, 161-210. https://doi.org/10.1007/978-981-13-0950-2_10
- Shibu Chameettachal, Falguni Pati. Polymeric gels for tissue engineering applications. 2018, 305-330. https://doi.org/10.1016/B978-0-08-102179-8.00012-0
- Nehar Celikkin, Chiara Rinoldi, Marco Costantini, Marcella Trombetta, Alberto Rainer, Wojciech Święszkowski. Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications. Materials Science and Engineering: C 2017, 78 , 1277-1299. https://doi.org/10.1016/j.msec.2017.04.016
- Shikha Chawla, Aditi Kumar, Prasad Admane, Amitabha Bandyopadhyay, Sourabh Ghosh. Elucidating role of silk-gelatin bioink to recapitulate articular cartilage differentiation in 3D bioprinted constructs. Bioprinting 2017, 7 , 1-13. https://doi.org/10.1016/j.bprint.2017.05.001
- Britta J.H. Driessen, Colin Logie, Lucienne A. Vonk. Cellular reprogramming for clinical cartilage repair. Cell Biology and Toxicology 2017, 33
(4)
, 329-349. https://doi.org/10.1007/s10565-017-9382-0
- Małgorzata K. Włodarczyk-Biegun, Aránzazu del Campo. 3D bioprinting of structural proteins. Biomaterials 2017, 134 , 180-201. https://doi.org/10.1016/j.biomaterials.2017.04.019
- Shibu Chameettachal, Sumit Murab, Radhika Vaid, Swati Midha, Sourabh Ghosh. Effect of visco-elastic silk-chitosan microcomposite scaffolds on matrix deposition and biomechanical functionality for cartilage tissue engineering. Journal of Tissue Engineering and Regenerative Medicine 2017, 11
(4)
, 1212-1229. https://doi.org/10.1002/term.2024
- Samira Jafari, Elham Ahmadian, Javad Khalili Fard, Ahmad Yari Khosroushahi. Biomacromolecule based nanoscaffolds for cell therapy. Journal of Drug Delivery Science and Technology 2017, 37 , 61-66. https://doi.org/10.1016/j.jddst.2016.11.006
- Bikramjit Basu, Sourabh Ghosh. Case Study: Development of Constructs for Maxillofacial Reconstruction. 2017, 217-233. https://doi.org/10.1007/978-981-10-3017-8_10
- Bikramjit Basu, Sourabh Ghosh. Case Study: 3D Printed Cartilage. 2017, 173-189. https://doi.org/10.1007/978-981-10-3017-8_8
- Swati Midha, Sourabh Ghosh. Silk-Based Bioinks for 3D Bioprinting. 2017, 259-276. https://doi.org/10.1007/978-981-10-3701-6_15
- Swati Midha, Sumit Murab, Sourabh Ghosh. Osteogenic signaling on silk-based matrices. Biomaterials 2016, 97 , 133-153. https://doi.org/10.1016/j.biomaterials.2016.04.020
- Eun Young Kim, Nirmalya Tripathy, Sun Ah Cho, Choun-Ki Joo, Dongwon Lee, Gilson Khang. Bioengineered neo-corneal endothelium using collagen type-I coated silk fibroin film. Colloids and Surfaces B: Biointerfaces 2015, 136 , 394-401. https://doi.org/10.1016/j.colsurfb.2015.09.041
- Elise DeSimone, Kristin Schacht, Tomasz Jungst, Jürgen Groll, Thomas Scheibel. Biofabrication of 3D constructs: fabrication technologies and spider silk proteins as bioinks. Pure and Applied Chemistry 2015, 87
(8)
, 737-749. https://doi.org/10.1515/pac-2015-0106
- Neety Sahu, Prakash Baligar, Swati Midha, Banani Kundu, Maumita Bhattacharjee, Snehasish Mukherjee, Souhrid Mukherjee, Florian Maushart, Sanskrita Das, Marko Loparic, Subhas C. Kundu, Sourabh Ghosh, Asok Mukhopadhyay. Nonmulberry Silk Fibroin Scaffold Shows Superior Osteoconductivity Than Mulberry Silk Fibroin in Calvarial Bone Regeneration. Advanced Healthcare Materials 2015, 4
(11)
, 1709-1721. https://doi.org/10.1002/adhm.201500283
- Maumita Bhattacharjee, Jeannine Coburn, Matteo Centola, Sumit Murab, Andrea Barbero, David L. Kaplan, Ivan Martin, Sourabh Ghosh. Tissue engineering strategies to study cartilage development, degeneration and regeneration. Advanced Drug Delivery Reviews 2015, 84 , 107-122. https://doi.org/10.1016/j.addr.2014.08.010
- James K. Carrow, Punyavee Kerativitayanan, Manish K. Jaiswal, Giriraj Lokhande, Akhilesh K. Gaharwar. Polymers for Bioprinting. 2015, 229-248. https://doi.org/10.1016/B978-0-12-800972-7.00013-X
- Sharda Nara, Shibu Chameettachal, Swati Midha, Himi Singh, Radhika Tandon, Sujata Mohanty, Sourabh Ghosh. Strategies for faster detachment of corneal cell sheet using micropatterned thermoresponsive matrices. Journal of Materials Chemistry B 2015, 3
(20)
, 4155-4169. https://doi.org/10.1039/C5TB00350D
- Sanskrita Das, Falguni Pati, Yeong-Jin Choi, Girdhari Rijal, Jin-Hyung Shim, Sung Won Kim, Alok R. Ray, Dong-Woo Cho, Sourabh Ghosh. Bioprintable, cell-laden silk fibroin–gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs. Acta Biomaterialia 2015, 11 , 233-246. https://doi.org/10.1016/j.actbio.2014.09.023
- Stuart K. Williams, James B. Hoying. Bioinks for Bioprinting. 2015, 1-31. https://doi.org/10.1007/978-3-319-21386-6_1
- Guozhong Lu, Shanshan Liu, Shasha Lin, David L. Kaplan, Qiang Lu. Silk porous scaffolds with nanofibrous microstructures and tunable properties. Colloids and Surfaces B: Biointerfaces 2014, 120 , 28-37. https://doi.org/10.1016/j.colsurfb.2014.03.027
- Longchao Li, Juan Ge, Baolin Guo, Peter X. Ma. In situ
forming biodegradable electroactive hydrogels. Polymer Chemistry 2014, 5
(8)
, 2880-2890. https://doi.org/10.1039/C3PY01634J