Copper Stabilization by Zeolite Synthesis in Polluted Soils Treated with Coal Fly Ash

Roberto Terzano,* Matteo Spagnuolo, Luca Medici, Bart Vekemans,§ Laszlo Vincze,§ Koen Janssens,§ and Pacifico Ruggiero
Dipartimento di Biologia e Chimica Agro-forestale ed Ambientale, University of Bari, Bari, Italy, Istituto di Metodologie per l'Analisi Ambientale (I.M.A.A.), C.N.R, Tito Scalo (PZ), Italy, and Department of Chemistry, University of Antwerp, Wilrijk, Belgium
Environ. Sci. Technol., 2005, 39 (16), pp 6280–6287
DOI: 10.1021/es050079d
Publication Date (Web): July 16, 2005
Copyright © 2005 American Chemical Society
*

 Corresponding author phone:  +39 080 5442847; fax:  +39 080 5442850; e-mail:  r.terzano@agr.uniba.it.

,

 University of Bari.

,

 Istituto di Metodologie per l'Analisi Ambientale.

,
§

 University of Antwerp.

Abstract

This study deals with the process of zeolite formation in an agricultural soil artificially polluted by high amounts of Cu (15 mg of Cu/g of soil dry weight) and treated with fused coal fly ash at 30 and 60 °C and how this process affects the mobility and availability of the metal. As a consequence of the treatment, the amount of dissolved Cu, and thus its mobility, was strongly reduced, and the percentage of the metal stabilized in the solid phase increased over time, reaching values of 30% at 30 °C and 40% at 60 °C. The physicochemical phenomena responsible for Cu stabilization in the solid phase have been evaluated by EDTA sequential extractions and synchrotron radiation based X-ray microanalytical techniques. These techniques were used for the visualization of the spatial distribution and the speciation of Cu in and/or on the neo-formed zeolite particles. In particular, micro XRF (X-ray fluorescence) tomography showed direct evidence that Cu can be entrapped as clusters inside the porous zeolitic structures while μ-XANES (X-ray absorption near edge structure) spectroscopy determinations revealed Cu to be present mainly as Cu(II) hydroxide and Cu(II) oxide. The reported results could be useful as a basic knowledge for planning new technologies for the on site physicochemical stabilization of heavy metals in heavily polluted soils.

Tools

History

  • Published In Issue August 15, 2005
  • Received for review January 14, 2005
    Revised manuscript received June 17, 2005
    Accepted June 17, 2005

Recommend & Share