Investigating Ebullition in a Sand Column Using Dissolved Gas Analysis and Reactive Transport Modeling

Richard T. Amos* and K. Ulrich Mayer
Department of Earth and Ocean Sciences, University of British Columbia, Vancouver, BC, Canada
Environ. Sci. Technol., 2006, 40 (17), pp 5361–5367
DOI: 10.1021/es0602501
Publication Date (Web): August 4, 2006
Copyright © 2006 American Chemical Society
*

 Corresponding author phone:  604-827-5607; fax:  604-822-6088; e-mail:  ramos@eos.ubc.ca.

Abstract

Ebullition of gas bubbles through saturated sediments can enhance the migration of gases through the subsurface, affect the rate of biogeochemical processes, and potentially enhance the emission of important greenhouse gases to the atmosphere. To better understand the parameters controlling ebullition, methanogenic conditions were produced in a column experiment and ebullition through the column was monitored and quantified through dissolved gas analysis and reactive transport modeling. Dissolved gas analysis showed rapid transport of CH4 vertically through the column at rates several times faster than the bromide tracer and the more soluble gas CO2, indicating that ebullition was the main transport mechanism for CH4. An empirically derived formulation describing ebullition was integrated into the reactive transport code MIN3P allowing this process to be investigated on the REV scale in a complex geochemical framework. The simulations provided insights into the parameters controlling ebullition and show that, over the duration of the experiment, 36% of the CH4 and 19% of the CO2 produced were transported to the top of the column through ebullition.

Tools

History

  • Published In Issue September 01, 2006
  • Received for review February 4, 2006
    Revised manuscript received May 18, 2006
    Accepted June 30, 2006

Recommend & Share

Related Content

Other ACS content by these authors: