Prev. Article Next Article Table of Contents

Article

Crystalline Syndiotactic Polystyrene as Reinforcing Agent of cis-1,4-Polybutadiene Rubber

Your current credentials do not allow retrieval of the full text.

Purchase the full-text

PDF/HTML,
figures/images,
references and tables,
(where available)

Antonio Buonerba†‡, Cinzia Cuomo†‡, Vito Speranza§ and Alfonso Grassi*†‡

^† Dipartimento di Chimica, Università di Salerno, via Ponte don Melillo, 84084 Fisciano (SA), Italy

^‡ NANOMATES, Research Centre for NANOMAterials and nanoTEchnology at Salerno University, 84084 Fisciano (SA), Italy

^§ Dipartimento di Ingegneria Chimica, Università di Salerno, via Ponte don Melillo, 84084 Fisciano (SA), Italy

Macromolecules, 2010, 43 (1), pp 367–374

DOI: 10.1021/ma901859e

Publication Date (Web): November 13, 2009

*To whom correspondence should be addressed. E-mail: agrassi@unisa.it. Fax: +39089969824.

Section:

Synthetic Elastomers and Natural Rubber

Abstract

Syndiotactic polystyrene (sPS), a thermoplastic polymer characterized by high crystallinity, good chemical resistance and high modulus, has been successfully tested as a reinforcing agent for cis-1,4-polybutadiene (PB) rubber. Blends of sPS and PB have been in situ synthesized using a multistep polymerization process catalyzed by monocyclopentadienyl titanium compounds activated with MAO. This procedure assures an intimate mixing of the components and homogeneous dispersion of the sPS particles having dimension from few hundreds of nanometers to micrometers. The analysis of the mechanical properties of the sPS−PB blends obtained using this process showed enhanced Young’s modulus, toughness, σ_break and ε _break: these properties were found to be 1 order of magnitude higher than those of PB and comparable to those of PB charged with inorganic filler as carbon black or silica. A multiblock copolymer (sPSB) comprising segments of sPS and PB was successfully in situ synthesized with the sPS and PB homopolymers and found to be an active compatibilizer of these blends producing a novel semicrystalline phase at the interphase between the sPS particles and the PB matrix.

View: Full Text HTML | Hi-Res PDF | PDF w/ Links