Download Hi-Res ImageDownload to MS-PowerPointCite This:ACS Sustainable Chem. Eng. 2020, 8, 49, 17933-17944

Research ArticleNovember 30, 2020

Effect of Sulfonation Level on Lignin/Carbon Composite Electrodes for Large-Scale Organic Batteries
Click to copy article linkArticle link copied!

Ujwala Ail
Ujwala Ail
Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
More by Ujwala Ail
Jaywant Phopase
Jaywant Phopase
Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
More by Jaywant Phopase
http://orcid.org/0000-0002-7179-6670
Jakob Nilsson
Jakob Nilsson
Ligna Energy AB, Box 787, 601 74 Norrköping, Sweden
More by Jakob Nilsson
Zia Ullah Khan
Zia Ullah Khan
Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
More by Zia Ullah Khan
Olle Inganäs
Olle Inganäs
Department of Physics, Chemistry and Biology IFM, Linkopings Universitet, Linköping, Sweden 58183
More by Olle Inganäs
http://orcid.org/0000-0002-6243-1450
Magnus Berggren
Magnus Berggren
Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
Wallenberg Wood Science Center, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
More by Magnus Berggren
Xavier Crispin*
Xavier Crispin
Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
Wallenberg Wood Science Center, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
*E-mail: [email protected]
More by Xavier Crispin
http://orcid.org/0000-0001-8845-6296

Open PDF Supporting Information (1)

ACS Sustainable Chemistry & Engineering

Cite this: ACS Sustainable Chem. Eng. 2020, 8, 49, 17933–17944

Click to copy citationCitation copied!

https://doi.org/10.1021/acssuschemeng.0c05397

Published November 30, 2020

Abstract

Click to copy section linkSection link copied!

The key figure-of-merit for materials in stationary energy storage applications, such as large-scale energy storage for buildings and grids, is the cost per kilo per electrochemical cycle, rather than the energy density. In this regard, forest-based biopolymers such as lignin, are attractive, as they are abundant on Earth. Here, we explored lignin as an electroactive battery material, able to store two electrons per hydroquinone aromatic ring, with the targeted operation in aqueous electrolytes. The impact of the sulfonation level of lignin on the performance of its composite electrode with carbon was investigated by considering three lignin derivatives: lignosulfonate (LS), partially desulfonated lignosulfonate (DSLS), and fully desulfonated lignin (KL, lignin produced by the kraft process). Partial desulfonation helped in better stability of the composite in aqueous media, simultaneously favoring its water processability. In this way, a route to promote ionic conductivity within the lignin/carbon composite electrodes was developed, facilitating the access to the entire bulk of the volumetric electrodes. Electrochemical performance of DSLS/C showed highly dominant Faradaic contribution (66%) towards the total capacity, indicating an efficient mixed ionic-electronic transport within the lignin-carbon phase, displaying a capacity of 38 mAh/g at 0.25 A/g and 69% of capacity retention after 2200 cycles at a rate of 1 A/g.

Subjects

Keywords

Synopsis

Partial sulfonation of lignin promotes ionic conductivity in ball milled carbon nanocomposite and ensures high faradaic storage and good stability.

Introduction

Click to copy section linkSection link copied!

Integration of renewable energy sources into our day-to-day lives is essential to reduce the dependence on the conventional energy technologies based on fossil fuels. Large-scale energy storage systems connected to the grid are one of the main components in this transition and context, as they ensure the reliability and flexibility of the renewable energy systems by damping the power fluctuations of intermittent solar and wind power energy sources. In this regard, the ability to store and distribute electricity in sustainable batteries, based on noncritical raw materials that last a long time, is transformative for the energy sector in our society. (1,2) Energy storage specifications of a battery are related to the specific battery technology and the amount of electroactive material included. Hence, a major constraint for the electroactive material to be used in large-scale applications, such as in energy-grids, is its abundance on Earth related to the cost of deriving a material with desired performance parameters. Thus, the economic viability of a technology is related not only to the performance of the materials with considerations of cost, but also to the budget of the manufacturing techniques and their compatibility with available technologies and industrial processes, as well as their environmental impacts. (3)

In this regard, biobased polymers such as lignin, originating from the forest and agricultural feed-stocks, represent a very attractive choice to explore. Chemically, lignin is composed of amorphous, heterogeneous, and highly cross-linked polymers of phenolic nature. A large amount of lignin is obtained as a byproduct of industrial processing of cellulose pulp and production of cellulosic fuels. (4) The dominant lignin isolation processes used today are the sulfite and kraft processes producing lignosulfonate (LS) and kraft lignin (KL), respectively. Unlike the lignosulfonate, kraft lignin is insoluble in water at neutral pH, which limits its industrial applications. LSs generally have a higher degree of sulfonation than that of KL. The sulfonate group makes LS anionically charged and facilitates its water solubility. (5) In addition to sulfonic acid groups, it also has hydrophilic functional groups such as hydroxyl, phenol, and carboxylic acid (Figure 1a). This important characteristic of being water processable makes LS a safe material and the most explored form of lignin in commercial applications. In the perspective of energy storage, lignin has a large amount of catechol groups that can be electrochemically oxidized and reduced in two-electron processes. In aqueous acidic solutions, quinone/hydroquinone couples generally provide a reversible two-electron/two-proton redox reaction (2e^–/2H⁺) (Figure 1b–c). Since lignin is nonconductive, an electrical conductor is required, as a conductive matrix in the lignin-conductor composite, to bring the electronic charge carriers to the quinone redox sites of lignin and enable charge storage inside the lignin phase. In this direction, conductors such as conducting polymers, (6−9) graphene, (10) partially reduced graphene oxide, (11) carbon nanotube, (12) partially reduced graphite oxide, (13) graphite, (14) and conductive carbon (15,16) have been composited with KL or LS.

Figure 1. (a) Chemical structure of LS, (b) sketch of the LS-conducting polymer composite, where the electrons can pass through the composite by hopping between adjacent conducting polymer chains (dark blue rectangles) and reach the redox quinone site on the LS (red color lines). The area reachable by the electron is illustrated as light blue color area around the polymer chains, which when overlapping with another polymer chains ensure transport or overlapping with LS ensure its local redox activity. The bottom inset illustrates the redox reaction of lignin. (c) Sketch of the kraft lignin-carbon nanoparticle composite displaying a much lower overlap between the area reachable by the electron and lignin. Only this interfacial volume would display the electrochemical redox process of lignin.

Until now, two forms of lignin derivatives have been mostly studied, LS and KL. Even though the water solubility of LS makes it easily processable for large-scale energy storage devices, (17) it is also one of the main drawbacks as it makes the LS phase leak out from the electrode composite into the electrolyte. This typically leads to a drastic drop in performance under electrochemical cycling. (18) Part of the solubility problem is solved by directly complexing the negatively charged LS electrostatically to the positively charged conducting polymer. However, for some conducting polymers, upon cathodic bias, the conducting polymer becomes neutral, which liberates LS to leak out into the electrolyte. So, the stability of a LS-conducting polymer composite is good but might have its limitation at some cathodic potentials. The advantage of such composites is the intimate mixing of the conductor with LS at the molecular scale so that most of the redox quinone groups of lignin become accessible with this polymeric conductor, thus leading to a high specific capacity (72–80 mAh/g at 1 A/g) (8,9) (Figure 1b). The molecular intimacy of this interaction was illustrated when LS in solution could be ion-exchanged with a small counteranion contained in a positively charged polymer to form a polymer-LS nanocomposite. (17) Another development pathway is to consider insoluble kraft lignin, which is not possible to complex with charged conducting polymers. Instead, various carbon-based conductors have been utilized. Here, the advantage is that the lignin is not soluble in the electrolyte, which improves the stability of the composite. However, the Faradaic contribution from the redox process of lignin is relatively lower than that of the lignin-conducting polymer composite. Indeed, providing electrical conductivity at the molecular scale within lignin is not trivial, since carbon nanoparticles are much larger and provide less favorable entropy of mixing while comparing with the low-dimensional conducting polymer chains. Because of the large size of the carbon nanoparticles and the electrically insulating property of lignin, only the carbon–lignin interface becomes electroactive and is involved in the active charge storage (Figure 1c). The strategy is thus to intermix carbon and lignin as much as possible to increase this interfacial volume. An interesting track is for instance the preparation of KL and carbon composites using oscillatory milling with the purpose of breaking the carbon particles into smaller components which leads to a better closeness of the carbon conducting phase with the lignin. (14,15)

Finally, worth mentioning is the observation that the charge storage capacity of the KL/carbon composite was influenced significantly by the KL interfacial thickness, probably due to the ionic diffusion limitations. (15) Hence, a higher KL content in the composite was unable to ensure a higher Faradaic capacity as KL alone does not conduct ions, and both electrons and ions are necessary for the efficient redox reactions (while LS transports ions). Hence, for battery applications, this is a key issue, wherein thick films are desired.

In this work, we investigate the role of the sulfonation level of lignin on its ionic conductivity and solubility with the goal to see if an intermediate sulfonation level can combine ionic conductivity and water insolubility. In our approach, mechanical milling by a planetary mill has been employed to achieve intimate electrical contact between the desulfonated LS (DSLS) and conductive carbon black, followed by the water-based binder to prepare the composite electrode material. We compare the properties of DSLS with two extremes, namely, LS (completely soluble in water) and kraft lignin (KL), via a lignoboost process (insoluble in water).

Experimental Section

Click to copy section linkSection link copied!

Procedure for the Desulfonation of LS

Desulfonation of LS was carried out via hydrolysis of sulfonic acid groups. For this purpose, 50 g of LS powder (supplied by Domsjö) and 8 g of NaOH (Sigma-Aldrich) were dissolved in 300 mL of distilled water, followed by refluxing for 5 h in an oil bath. After this, the solution was cooled to 90 °C, and 100 mL of 60% H₂SO₄ was added to the reaction mixture while stirring at room temperature for 2 h. Subsequently, the product, DSLS, was collected by centrifugation, washed two times with distilled water, and dried in a vacuum oven at 40 °C. Figure 2a,b shows the scheme of the desulfonation process and the molecular weight distribution. Note that sulfuric acid was used as a neutralization agent for the alkaline reaction mixture. There are two reasons for that. First, the sulfate ion is non-nucleophilic and cannot react with lignin in diluted form. Second, the lignosulfonate already contains some sodium sulfate as residue from the pulp and paper process. When comparing different lignin fractions, we prefer to minimize the different types of contaminations in the sample even though the analysis method becomes a bit more complex with varying sodium sulfate content in the sample.

Figure 2. (a) Scheme of desulfonation of LS, (b) relative distribution of molecular weight versus logarithmic molecular weight for LS and DSLS in water and eluent.

DS-LS Material Characterization

Gel Permeation Chromatography (GPC)

Size exclusion chromatography with UV detection at 256 nm was carried out to estimate the change in molecular weight of DSLS. For this purpose, LS and DSLS were dissolved in water and in eluent (sodium borate buffer pH 9 + 10% MeOH) and filtered using a 0.45 μm syringe filter before injection. Since the DSLS sample was only partially soluble in water, the insoluble fraction was removed by filtration. Calibration was carried out using polystyrenesulfonate with known molecular weight (M_w) varying from 122 g/mol to 679 000 g/mol, and measurement was performed at 25 °C. Columns SB-802.5 HQ, SB-803 HQ, and SB-804 HQ (Shodex) were used for HPLC-analysis.

Figure 2b shows the relative distribution and molecular weight of the LS and DSLS samples dissolved in both water and borate eluent. There is a large difference in molecular weight for the DSLS and the starting material LS. Molecular weight of LS is 11.4 kDa while for DSLS is 41 kDa. A lot of the low molecular weight materials including sugars are washed away in the washing procedure after the neutralization of the lignin. In addition, DSLS also contains a lot of high molecular weight lignin with M_w of several 100 kDa. These fractions were not present before our chemical treatment and have formed due to condensation reactions. The molecular weight distributions are summarized in Table 1.

Table 1. Detailed Information about the Molecular Weight^a

sample	M_W	log M_w	M_n	M_p
LS in water	12700	4.1	1070	3760
LS in eluent	11400	4.1	1050	3440
DSLS water	23700	4.4	1410	4190
DSLS in eluent	41400	4.6	1730	4570

^{^a}

M_w = Weight-averaged molecular weight. M_n = Number-averaged molecular weight. M_p = Peak molecular weight.

Elementary Analysis

Elementary analysis was carried out to determine the total sulfur (S_tot) content, and the sulfate content (S_SO₄) was measured by titration. The sulfonic acid (S_SO₃) content was assumed to be S_SO₃ = S_tot – S_SO₄. The sulfonate content was reduced by 20% after desulfonation, as shown in Table 2.

Table 2. Sulfur Content in LS and DSLS

sulfur source	LS	DSLS
S_tot (%)	7.67	9.39
S_SO₄ (%)	1.95	4.60
S_SO₃ (%)	5.72	4.79

Preparation of DSLS/Carbon Composite Electrode

The electrode nanocomposite material has been fabricated via solvent-free mechanical milling (ball milling) of conductive carbon (ENSACO 360 G from IMERYS Graphite and Carbon, with BET surface area of 780 m²/g) and desulfonated LS (DSLS), in a planetary ball mill, Retsch PM 100 using ZrO₂ milling media. The dry ratio of the DSLS and carbon was 1:1. The milled powder was then combined with 6 wt % of CMC/SBR (carboxymethylated cellulose/styrene butadiene rubber) binder system, and the resulting slurry was applied onto the carbon coated SS (stainless steel) electrodes. Graphite (flakes, mp 3652–3697 C, density 1.9 gcm^–3, Sigma-Aldrich) was used for comparison of carbon type in our process.

A microstructural study was carried out using scanning electron microscopy (SEM, Zeiss Sigma 500 Gemini). The contact angle of the water on the lignin samples was measured using an optical contact angle and surface tension meter (KSV Instruments CAM 200). The layers formed for the contact angle analysis were obtained by depositing the water solution/slurry of the different lignin samples on a glass substrate and drying at 70 ^οC for 15 min. Impedance measurements were carried out using an impedance spectrometer (an Alpha high-resolution dielectric analyzer, Novocontrol Technologies GmbH) using a two-point probe method. An AC voltage of 5 mV is applied while sweeping the frequency from 1 MHz to 1 Hz, and the humidity was maintained at 90% RH and 60% RH. The layers were made by drying from a drop-casted water solution/slurry of lignin between the two Au lateral electrodes, and those were connected to the impedance spectrometer. PerkinElmer Lambda 900 was used for the UV–visible spectroscopy of the samples in the wavelength region of 250–700 nm.

Electrochemical Characterization

Electrochemical performance of the electrodes was studied using a computer-controlled potentiostat (SP200, BioLogic). The electrodes were evaluated by the cyclic voltammetry (CV) at different scan rates and the galvanostatic charge–discharge (GCD) by applying different charging rates (mass normalized current) in a three-electrode system under nitrogen atmosphere. The measurements were also carried out in ambient conditions. There are no significant changes in the electrochemical activity in both the atmospheres in the potential ranges used in the present study. A Pt mesh was used as a counter electrode, potential was measured versus the Ag/AgCl reference electrode, and the electrolyte was 0.1 M HClO₄. The charge capacity (mAh/g) was obtained by dividing the product of the discharge time (in s) and the discharge current (in mA) by the product of 3600 and mass of the total electrode material (in g).

Results

Click to copy section linkSection link copied!

Characterization of Lignin with Various Sulfonation Levels

We begin by investigating the difference between the three types of lignins, namely, LS, partially desulfonated LS (i.e., DSLS), and completely desulfonated KL. For this purpose, each lignin sample was immersed into water. In the case of LS, the product is a solution, whereas for DSLS and KL, the product is an aqueous slurry. It is important to note that even though KL does not dissolve in water, it is wetted by water due to the presence of a lot of hydrophilic functional groups such as hydroxyl, phenol, and carboxylic acid. A similar observation is also seen in DSLS. Figure 3a shows the SEM micrograph of different lignin layers that were prepared by the above-mentioned method followed by coating on conducting substrates for the SEM study. The DSLS layer obtained by drying the slurry shows a porous surface with well-defined grain morphology formed by the solid particles from the slurry. This morphology is totally different than the smooth solid polymer film made from the LS solution. The microstructure of the KL layer has some similarity with the DSLS layer. However, the particles in the KL slurry seem to have coalesced with each other leading to a more compact, thus much less porous morphology compared to the DSLS. The grains are in the range of 100 nm. These microstructural variations of the three different lignin layers are expected to also have an impact on the wetting behavior of water in addition to their sulfonation level. To illustrate the water affinity for wetting of the three lignin layers, the contact angles Φ of a water drop is measured on the surface of the LS (Φ = 28°), DSLS (Φ = 18°), and KL (Φ = 20°) layers (Figure 3b). The contact angles on DSLS and KL were reduced to below 10° within 2 s due to their microporous structures and capillary forces absorbing water in the pores. The wetting angle of LS varies also dynamically and reduces to 21° in 1 min, most likely due to a slow solubility of LS in the water drop.

Figure 3. SEM images and contact angle of a water drop for (a) LS layer, (b) DSLS layer, and (c) KL layer. The inset picture illustrates the water solution/slurry of different types of lignin samples. Bode plots of LS (d) and DSLS layers (e) at different relative humidity values.

These comparisons between the lignin layers illustrate the impact of the concentration of sulfonate groups on the physicochemical properties of the lignins. This enables us to identify which of the lignins should be used to make the electrode for a battery operating in an aqueous electrolyte since one of our target is to consider nonflammable aqueous electrolytes for large-scale battery applications. In that context, the interaction of the lignin layers with water is important. The catechol-type groups in the lignins can undergo a redox reaction and thus store electricity (two electrons per catechol group) (see Figure 1); which is the motivation why lignin can be used as true energy storage material. But for that purpose, electrons and ions (protons) need to reach the catechol groups. The lignin cannot transport electrons and that is why lignin will subsequently be composited with carbon nanoparticles, which is an electronic conductor. But it is thus crucial to understand which of the lignin layers could lead to a better ionic conductivity. For this reason, we further studied the ionic conductivity of these layers by impedance spectroscopy measured at 60% RH and 90% RH. In LS, the anions and sulfonate are immobile and covalently attached to the branched biopolymer, while the positively charged counterions (H⁺ or Na⁺) give rise to ionic conductivity, as well as residual sulfate ions coming from the synthesis. Typically in polyelectrolytes, the conductivity of ions increase exponentially with the humidity until it reaches a plateau at high humidity (∼70–80% RH) where percolation water channels are formed inside and on the surface of the materials. (19,20) Hence, the ionic conductivity at 60% RH is dominated by the material property to transport ions, while at 90% RH it is dominated by the transport of ions in water percolation paths, thus approaching liquid electrolyte and simulating the electrode in contact with a liquid electrolyte in a battery. AC probe voltage of 5 mV was used, and its frequency was swept from 1 MHz to 1 Hz. The first observation is that it was not possible to characterize the KL layer by impedance spectroscopy simply because it was too insulating both for electrons and ions (∼10⁹ Ω). On the contrary, the impedance spectrum could be measured both for LS and DSLS. The Bode plot is displayed in Figure 3d,e for LS and DSLS respectively. Bode plots allow one to understand and separate the ionic mechanisms in the time/frequency domain, mainly the oscillation of the ions in the AC field, which is a resistive character (phase angle Φ = 0°) from which the ionic conductivity can be extracted. In the case of LS (Figure 3d), at 60% RH, three different regimes are found as in other sulfonated polyelectrolytes, (19) namely, dipolar relaxation (>1 M Hz), ionic migration (40 kHz–3 kHz, indicated by Φ = 0°), and the accumulation of ions at the electrode surface forming the electric double layer capacitor (phase angle Φ = −90°) (<6 Hz). As the RH increases to 90%, all of those mechanisms shift toward a higher frequency side of the Bode plot because the ions are getting more mobile. A similar trend with humidity variation is also observed in DSLS samples as seen in Figure 3e. At 60% RH, at the low frequency range, the Bode plot shows that the DSLS sample form the electric double layer 18 times faster than LS, indicating the higher ionic conductivity of the DSLS compared to the LS sample. Indeed, the crossing between resistive and capacitive character represents the start of formation of the electric double layer at Φ = −45^ο, found at 7 Hz for LS and 125 Hz for DSLS. At 90% RH, the double layer formation in DSLS is six times faster than LS. Total conductivity was calculated as σ = d/(RA), where d, A, and R are the distance between the electrodes, cross-sectional area of the drop-casted film, and the real part of impedance corresponding to the zero phase angle from the Bode plot, respectively. The total ionic conductivity of LS is 0.05 S/m at 60% RH and 8.2 S/m at 90% RH, whereas the total conductivity of DSLS at 60% RH is 0.73 S/m and as high as 32 S/m at 90% RH. A priori this is counterintuitive since the concentration of sulfonate groups in the layer governs the concentration of mobile cations in the layers. The conductivity is proportional to the product of the concentration of mobile ions and the mobility of the ions. Hence, since the DSLS has a lower concentration of sulfonate, it is expected to have a lower concentration of mobile cations; however, it has higher conductivity. But in our samples, we found out that DSLS also has 2.3 times more sulfate ions, thus introducing seven times higher concentrations in mobile ions (H⁺, Na⁺, SO₄^2–). The difference in conductivity could also be due to a difference in morphology that will affect the mobility of ions in those layers. Indeed, LS is a plain layer, and the ions are transported within its bulk, while the DSLS layer is microporous where the pores are inactive in the ionic transport, except if they are filled with water at high humidity as found for other microporous sulfonated polyelectrolytes. (21) Indeed, the measurements are performed at 90% RH, and both DSLS and LS are hygroscopic and wetted by water. Note that the KL layer, although less porous as seen by SEM, does not transport ions. Likely the pores in KL are not interconnected by percolation and have a closed porosity.

Choice of the Sulfonation Level for the Lignin/Carbon Composite

While LS and DSLS layers show good ionic conductivity, the KL layer does not transport ions, which had already been suspected as a limiting phenomena for making thick lignin-carbon electrodes. (15) Since none of those types of lignins transport electronic charge carriers, we are investigating now their composite with carbon black nanoparticles. This strategy is typically used to design battery electrodes. (22) Carbon nanoparticles are interesting because they are small and have a large volume area, thus promoting large interface area with the redox insulating material; moreover, carbon is not covered by an insulating oxide and is certainly cheap. For the sake of comparison, the lignin/carbon composite electrodes were prepared by manually mixing the corresponding lignin (LS, DSLS, KL) and carbon black powders in a 1:1 weight ratio in water along with a binder system made of carboxymethyl cellulose (CMC) and styrene–butadiene rubber (SBR) (6 wt %). This binder system has been optimized for graphite electrodes. (23) In order to investigate the water stability of the lignin/carbon composite electrodes, they were blade-coated onto the carbon-coated stainless steel current collectors and dried at 60 ^οC for 15 min. The dried electrodes were then dipped in water as shown in Figure 4a, and the dissolution was examined by visual inspection. In the case of LS/C, the lignin leakage started within 30 s after dipping, followed by the dissolution of the composite electrode giving rise to a black color to water. This illustrates the challenge of using LS with carbon. Since DSLS and KL are not soluble in water, the DSLS/C and KL/C composites are much more stable. The water used to dip the composite electrodes during 2 h was analyzed by UV spectroscopy (Figure 4b). The UV–vis spectrum reveals that lignin leakage exists in water from both LS/C and DSLS/C composites as evident by an absorption peak about 280 nm related to the aromatic monomeric rings of lignin. (24−26) The samples were compared with the reference sample of aqueous solution of LS (shown as LS-std) in Figure 4b. The spectrum for the water analysis in which KL/C was dipped does not display any specific optical transition due to lignin, but a clear background signal in the visible region attributed to the carbon nanoparticles. Such a signal in the visible region is also found for the LS/C composite that totally disintegrates in water. Hence, DSLS/C samples show the least disintegration/dissolution of the entire electrode material along with carbon as compared to LS/C and KL/C. DSLS is more efficient in forming a coherent composite with carbon and the binder compared to LS and KL. From the molecular weight analysis study (Figure 2b), it can be noted that there is a large difference in molecular weight for the DSLS and the starting material LS. A lot of the low molecular weight materials including sugars are washed away in the washing procedure after the neutralization of the lignin. Also, the DSLS contains a lot of high molecular weight lignin with MW of several 100 kDa. The purpose with the chemical treatment of the lignin was to reduce solubility. This was achieved; however, the condensation of low MW lignin into insoluble high MW lignin is an important factor as the removal of sulfonic acid functionalities to reduce the leakage in water.

Figure 4. (a) Composite electrodes dipped in water for 2 h, (b) the UV–vis spectra of the water after 2 h of dipping the composite electrodes, (c–e) the Bode plots at different relative humidity values for KL/C, LS/C, and DSLS/C samples, respectively.

In order to study the electrical transport enabled by the carbon particles, impedance spectroscopy measurements of the lignin/carbon composites were carried out at 60% RH and 90% RH. The Bode plot in Figure 4c shows a pure resistive behavior for KL/C with a zero phase angle in the entire frequency region of 1 MHz to 1 Hz at both relative humidity conditions. Hence, we believe that the impedance data of KL/C is solely representing the electronic carriers hopping between the carbon particles in the conducting percolation paths without any ionic contribution, as KL was ionically insulating. The total conductivity of KL/C barely vary with humidity and is about 2.9–3 S/m. We observed a different behavior for LS/C and DSLS/C where the phase angle is not zero for the high frequency range (Figure 4d,e), and thus does not behave as an ideal resistor anymore. Considering the behavior at 90% RH, we know that for the same electrode geometry, the pure LS film was displaying ionic transport already at 1 MHz (Figure 3d) with values of ionic conductivity of about 8 S/m, which is the same order of magnitude as the electronic conductivity in the KL/C. Hence, we believe that ionic transport is occurring simultaneously with electronic transport in LS/C and DSLS/C composites. Our hypothesis is that the drop of the real part of the impedance toward high frequency is due to the screening of the electronic current passing through the percolation path of carbon particles by the ionic charges moving within the LS and DSLS surrounding matrix. We do not have enough data to attempt to distinguish between the ionic and electronic conductivity in those mixed electronic-ionic conductors, (27,28) but we extract the total conductivity at a low frequency to be 5.4 S/m (90% RH) for LS/C and 2.6 S/m (90% RH) for DSLS/C. At 60% RH, the total conductivity from the low frequency region is 6.5 S/m for LS/C and 2 S/m for DSLS/C. The three composites have the same amount of carbon black and were prepared in identical manner, and hence the fact that they display the same order of magnitude for the total electrical conductivity indicates that in all those composites the carbon black particles are forming good electronic conducting percolation paths. KL/C is mostly an electronic conductor, while LS/C and DSLS/C are mixed electron–ion conductors due to the physicochemical properties of the lignin that vary with the level of sulfonation. Because of the water stability of DSLS/C and its ionic conductivity, we thus focus the rest of this study on the optimization of the DSLS/C composites and its electrochemical characterization.

Processing Methods for the Fabrication DSLS-Carbon Electrodes

In order to investigate the significance of the intimate contact between the conducting carbon phase and the DSLS redox phase, the lignin/carbon composite was prepared either by manually mixing the components along with the binders or by using high energy ball milling. Figure 5a,b shows the cyclic voltammetry (CV) (−0.2 to 0.8 V vs Ag/AgCl) and galvanostatic discharge plots of the electrode in the potential range of −0.2 to 0.75 V vs Ag/AgCl, in 0.1 M HClO₄. The composite electrode caste on to the carbon coated stainless steel substrate was used as the working electrode, and a Pt mesh was the counter electrode. The DSLS/C electrodes were electrochemically cycled using CV at different scan rates, namely, 100 mV/s, 50 mV/s, 20 mV/s, 10 mV/s, and 5 mV/s (Figure 5a) and display two charge storage contributions: (i) A capacitive current contribution due to the formation of electric double layer at the surface of the carbon particles, which appears as a rectangular tail close to 0 V. The capacitive current follows I = –C dV/dt, where C is the capacitance and dV/dt is the scan rate. The current at 0 V increases indeed linearly with the scan rate, Figure S1. (ii) A Faradaic current appearing as a peak in the potential range of 0.4–0.65 V, which corresponds to the proton-coupled electron transfer on the catechol/quinone groups of DSLS (chemical reaction in Figure 1). The current peak evolves linearly with the square root of the scan rate Figure S2, as indicative of a diffusion limited process likely due to the protons diffusion from the electrolyte to reach the lignin-carbon active interface. The galvanostatic charge–discharge measurements (Figure 5b) in the potential window of −0.2 to 0.75 V, at various charging rates ranging from 0.25 A/g up to 8 A/g, also displayed those two contributions. Discharge curves show a plateau in between the potential range of 0.45–0.6 V, due to the Faradaic reactions of quinones, then a linear decay specific of a capacitive contribution between 0.4 to −0.2 V. The specific capacity of the manually mixed DSLS/C is 15 mAh/g at a 0.25 A/g charging rate. We now compare the manual mixing with the process of making the composite by dry ball milling of DSLS and carbon black in planetary mill with ZrO₂ milling container and balls. Note that the CMC/SBR binder was added after the active components are mixed either manually or by milling and the water-based slurry was formed. Figure 5c–e shows the comparison of the manual mixed composite and the ball milled composite electrode in the CV, galvanostatic discharge curve, and the capacity versus charging rate. The specific capacity of the DSLS/C composite prepared by ball milling (32.5 mAh/g at 1 A/g) is more than twice that of the manual mixing (14 mAh/g at 1 A/g), which is a clear indication that the milling process forms more redox active interface between the carbon conducting phase and the DSLS phase. The difference between the two processing methods to make the composite is that the ball milling is powerful enough to break the carbon black nanoparticles in smaller parts, (29) thus, creating a larger lignin/C interface volume where electrons can reach the catechol redox site of the lignin (see Figure 1). We note however that the specific capacitance of the ball milled electrode drops dramatically with the charging rate, while the sample formed by manual mixing is almost constant. This suggests that the carbon percolation paths in the manually mixed DSLS/C composite are more electrically conducting than in the ball milled samples; the latter has difficulties to channel the electrical current from the large interfacial volume to the collector at a high charging rate. Despite that behavior, the ball milled DSLS/C is superior for the specific capacity in the whole range of charging rate and reaches the behavior of the manually mixed only for a very high charging rate. Hence, we thus focus now on the ball milling processing method for the electrodes and continue to optimize this electrode.

Figure 5. Panels (a) and (b) are the CV and the galvanostatic discharge plots of the manually mixed DSLS/C composites, (c–e) show the comparison of the manually mixed and ball milled DSLS/C composites in their CV, galvanostatic discharge, and the capacity versus the charging rate.

To understand the improved performance of the ball milled samples of DSLS/C, microstructural studies were carried out using SEM along with the energy dispersive X-ray spectroscopic analysis (EDX). The microstructure of the manually mixed sample (Figure 6a) consists of two distinct intermixed phases, namely, plate-like shapes (points 1 and 2) and fine spherical shapes (points 3 and 4). In contrast, the ball milled composite shows homogeneous morphology with grains of different dimensions (Figure 6b). Figure 6c shows the compilation of the mass percentage of carbon and oxygen on different points on the surface for the above-mentioned composites. The EDX analysis performed on plate-like shapes (in Figure 6a points 1 and 2) shows a lower amount of carbon (86–81%) and on the spherical morphology (in Figure 6a points 3 and 4) show a higher amount of carbon (94–95%). The mass percentage of oxygen was higher for the plate-like shapes (10–13%) as compared to spherical shapes (2–4%). These observations indicate that the plate-like morphology corresponds to lignin particles, and the spherical shapes correspond to the carbon particles. The gray color contrast in the SEM image also reflects different atomic densities of the plate-like shape (lignin = light) compared to a spherical shape (carbon = dark). In addition, this contrast variation suggests a difference in the conductivities of the two phases, with the lighter (lignin) phase less conducting than the darker (carbon) phase. However, these distinct microstructural features are not observed in the ball milled samples (Figure 6b); rather, they have a relatively homogeneous microstructure with grains of different sizes. Furthermore, the EDX analysis of different points on the sample surface shows a uniform distribution of carbon (88–90%) and oxygen (6.9–8.5%), suggesting the better intermixing of components at the nanometer scale during the ball milling process. The elemental mapping of the manually mixed and the ball milled samples is presented in the Figures S3 and S4.

Figure 6. (a, b) SEM images of the manually mixed and ball milled DSLS/C composites respectively showing the regions analyzed by EDX. (c) The comparison of the carbon mass % and oxygen mass % at different regions on the surface for manually mixed and ball milled DSLS/C composites.

Optimization of the Ball Milled DSLS-Carbon Electrodes

Further optimization of the composite relates to the ratio between the carbon conducting phase and the redox lignin phase in order to see the effect on the specific capacitance and its behavior versus charging rates (Figure 7a). The ratio of DSLS/C was varied as 1:4, 1:1, and 3:2. The maximum capacity was obtained for a 1:1 composition. Further, we investigated the effect of the milling time (Figure 7b), from 2 h to 24 h, by assuming that this will control the DSLS/C active interface volume in the electrode in which both electrons and protons can meet on the catechol redox site of lignin. For that purpose, we focused on the 1:1 composition of DSLS/C. Figure 7b shows the galvanostatic discharge plot for electrodes with different durations of the milling, keeping the other milling parameters identical. The milling time was varied as 2, 3, 5, 10, and 24 h. The electrode material shows improved performance as the milling time increases from 2 to 10 h, due to the possible particle size reduction, leading to better nanoscale electrical contact leading to an improved charge transport between the conductor (carbon) and the lignin. There was an improvement of 15% in the capacity at 10 h. However, when the ball milling time was increased to 24 h, the performance was found to be lower, indicating a trade off between the volume occupied by the conducting carbon percolation paths for the electronic carrier transport and the volume of accessible redox site in the DSLS phase. The degradation of the performance above 10 h ball milling suggests a possible chemical degradation of lignin due to heat generation during the milling process. We also investigated the effect of the type of carbon material, namely, the carbon black and the conductive graphite. Here the intension was to understand the impact of the nature of carbon on the electrochemical behavior even after ball milling. And the effect is striking as presented in Figure 7c,d. The DSLS/conducting carbon has a higher specific capacitance (32 mAh/g at 1 A/g) compared to the corresponding composite with graphite (2 mAh/g at 1 A/g) for a similar DSLS/C ratio. This is somehow a surprise since a recent study using ball milling with LS and graphite (with 1:1 ratio) reached a discharge capacity of 25 mAh/g at 1 A/g. (14) The DSLS used in the present study does not seem to be efficient in shearing the graphite as compared to the LS in the above-reported study. Importantly, that study reveals a clear leakage of LS in aqueous electrolytes under prolonged electrochemical cycles, mostly in acidic electrolytes, leading to a 40% drop in specific capacity within 1000 cycles. In order to investigate the electrochemical stability, the DSLS/C electrode was studied in 0.1 M HClO₄ electrolyte in a three-electrode method by galvanostatic charge/discharge (Figure 7e) at ambient condition. The charging rate used was 1 A/g, and the potential range was from −0.2 to 0.75 V versus Ag/AgCl. A 40% reduction in the specific capacitance was observed after 2200 cycles. Self-discharge was measured in nitrogen atmosphere with a charging rate of 1 A/g during the charging stage. The electrode was charged to a potential of 0.75 V vs Ag/AgCl and kept at that potential for 30–60 min, followed by an open circuit measurement. The data are shown in Figure 7f, where the potential dropped by 40% of the initial value after 30 h.

Figure 7. (a) Capacity vs charging rates for composite electrodes with different ratios of carbon and DSLS, (b) the galvanostatic discharge plot at 1 A/g charging rate for DSLS/C (1:1) samples milled for different durations, (c) and (d) show the cyclic voltammetry at 10 mV/s scan rate, the capacity versus charging rate for DS-LS/C (1:1) sample, where the carbon type was varied, (e) galvanostatic charge–discharge stability (cycle) of the DSLS/C electrode of composition of 1:1 with a charging rate of 1 A/g in ambient condition and (f) self-discharge study of the electrode in 0.1 M HClO₄ in nitrogen atmosphere.

Discussion

Click to copy section linkSection link copied!

We provide an overview of the total specific capacity of various lignin-based electrodes found in the literature versus the percentage of charge retention after 100 cycles (Figure 8a). This is an attempt to compare the energy storage ability and the stability. We observe two groups of data, one around 70–80 mAh/g for LS/PAAQ/PEDOT, (9) KL/C, (15,16) LS/RGO; (11) and one group around 30–40 mAh/g for LS/graphite, (14) KL/CNT, (12) LS/PEDOT, (6) and LS-PEDOT:PSS. (18) As mentioned in the introduction, a positively charged conducting polymer complexed with negatively charged LS provides a stable electrode (e.g., LS-PEDOT), but LS combined with graphite leads to a less stable electrode because of the solubility of LS in the electrolyte (LS-graphite). The reduced graphene oxide, RGO, seems to provide better stability possibly due to specific interaction between LS and the polar groups of RGO. DSLS improves the stability of the electrode composited with carbon. Our DSLS/C electrode is in the group with a low specific energy, but when we examine a bit closer our DSLS/C electrode with the competitive electrodes based on KL/C, (15) we observe a striking difference important to underline in a discussion. Indeed, for the sake of comparison between our work and the high specific capacity of KL/C, (15) the capacity was calculated from the CV curve measured at a scan rate of 5 mV/s in 0.1 M HClO₄. The total capacity calculated from the CV curve has two contributions, one from the capacitive effect (non-Faradaic contribution) due to the formation of electric double layer at the carbon surface, and the other originating from the redox processes (Faradaic contribution) of lignin as shown in Figure 8b. Figure 8c shows the comparison of the DSLS/C composite prepared by ball milling with the KL/C electrode (15) also prepared via ball milling. Besides the differences in the milling method used, it is also important to note that the DSLS/C slurry is completely water based (binder CMC/SBR), unlike the KL/C using PVDF binder in N-methyl pyrrolidone. In our DSLS/C electrode, 66% of the total charge storage capacity is due to the contribution from the Faradaic process of lignin, whereas for the KL/C electrode only 11% of the specific capacity comes from the lignin redox activity (Figure 8c). Thus, the large specific capacitance of KL/C is mostly due to the good quality and high surface area of the carbon nanoparticles in the composite. This indicates that the accessing of the redox sites is more effective in our approach due to a high interfacial volume in DSLS/C where both electrons and ions can be accessed. We believe that this is due to the good ionic conductivity of DSLS compared to KL. The result of this strong Faradaic contribution is a discharge curve with a clear plateau in the range (0.4–0.6 V) (Figure 8d), while other studies for KL/C display a rather linear decay with a weak shoulder. This conclusion is further evidenced by the recent report of LS/graphite processed by ball milling (14) and the LS/RGO displaying both a strong Faradaic contribution from LS due to its ionic conductivity compared to KL.

Figure 8. (a) Maximum capacity reported of lignin-based electrodes versus the percentage of capacity retention after 100 cycles for various studies found in the literature: LS/graphite, (14) LS/PAAQ/PEDOT, (9) KL/C, (15,16) KL/CNT, (12) LS/RGO, (11) and LS/PEDOT. (6) Conducting polymers composites are represented by open square symbol, and the composites with other carbon materials are shown with filled square symbol. The data from the present study are shown in blue filled square symbol. (b) CV of the DSLS-C electrode having a 1:1 composition along with 6 wt % binder. The measurement was done in 0.1 M HClO₄ at a scan rate of 5 mV/s. (c) Comparison of the total capacity and deconvoluted contributions (non-Faradaic from carbon and Faradaic from lignin with the literature data for the points related to KL/C). (15) (d) The discharge plots at different charging rates for the DSLS-C composite.

Conclusions

Click to copy section linkSection link copied!

We demonstrate that the desulfonation of LS by simple alkali treatment takes place at the same time as the formation of high molecular weight fractions due to condensation. The resulting DSLS is insoluble in water, but the nanoparticles formed are easily wetted by water to make a water-processable DSLS slurry that is perfect for large-scale coating in industrial premises. Interestingly, the ionic conductivity of DSLS is higher than LS, while KL is nonconducting. The combination of good ionic conductivity and insolubility make DSLS unique compared to LS and KL and ideal for energy storage applications. The effectiveness of the ball milling process to form the composite of DSLS/C leads to a stable electrode that displays a high Faradaic contribution to the total specific capacitance, thus making it unique compared to KL/C electrodes. This study brings us one step further towards the design of efficient lignin-based electrodes for large-scale nonflammable energy storage solutions.

Supporting Information

Click to copy section linkSection link copied!

The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05397.

Current (at 0 V) versus scan rate, current (at redox potential) versus √ scan rate for manually mixed DSLS/C, EDX elemental mapping of manually mixed and ball milled DSLS/C (PDF)

sc0c05397_si_001.pdf (305.93 kb)

Terms & Conditions

Most electronic Supporting Information files are available without a subscription to ACS Web Editions. Such files may be downloaded by article for research use (if there is a public use license linked to the relevant article, that license may permit other uses). Permission may be obtained from ACS for other uses through requests via the RightsLink permission system: http://pubs.acs.org/page/copyright/permissions.html.

Author Information

Click to copy section linkSection link copied!

Corresponding Author
- Xavier Crispin - Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden; Wallenberg Wood Science Center, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden; http://orcid.org/0000-0001-8845-6296; Email: [email protected]
Authors
- Ujwala Ail - Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
- Jaywant Phopase - Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden; http://orcid.org/0000-0002-7179-6670
- Jakob Nilsson - Ligna Energy AB, Box 787, 601 74 Norrköping, Sweden
- Zia Ullah Khan - Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
- Olle Inganäs - Department of Physics, Chemistry and Biology IFM, Linkopings Universitet, Linköping, Sweden 58183; http://orcid.org/0000-0002-6243-1450
- Magnus Berggren - Laboratory of Organic Electronics, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden; Wallenberg Wood Science Center, Bredgatan 33, 60174, ITN, Linköping University, Norrköping, Sweden
Notes
The authors declare no competing financial interest.

Acknowledgments

Click to copy section linkSection link copied!

The authors thank the Knut and Alice Wallenberg Foundation (proof of concept “Paper battery”, Wallenberg Wood Science Center, a Wallenberg Scholar (O.I.)) and Vinnova (Treesearch, Digital Cellulose Center), Advanced Functional Materials Center at Linköping University. The authors thank Peter Ringstad working at Ligna Energy AB for discussions and project management, Henrik Wallmo working at Valmet AB for discussions and providing the KL samples, Edblad Magnus working at Domsjö-Adityabirla for discussions, chemical analysis, and providing the LS samples.

References

Click to copy section linkSection link copied!

This article references 29 other publications.

1
Barnes, F., Levine, J., Ed. Large Energy Storage Systems Handbook; CRC Press: Boca Raton, 2011, DOI: 10.1201/b10778 .
Google Scholar
There is no corresponding record for this reference.
2
Liedel, C. Sustainable Battery Materials from Biomass. ChemSusChem 2020, 13, 2110– 2141, DOI: 10.1002/cssc.201903577
Google Scholar
2
Sustainable Battery Materials from Biomass
Liedel, Clemens
ChemSusChem (2020), 13 (9), 2110-2141CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
A review. Sustainable sources of energy have been identified as a possible way out of today's oil dependency and are being rapidly developed. In contrast, storage of energy to a large extent still relies on heavy metals in batteries. Esp. when built from biomass-derived orgs., org. batteries are promising alternatives and pave the way towards truly sustainable energy storage. First described in 2008, research on biomass-derived electrodes has been taken up by a multitude of researchers worldwide. Nowadays, in principle, electrodes in batteries could be composed of all kinds of carbonized and noncarbonized biomass: On one hand, all kinds of (waste) biomass may be carbonized and used in anodes of lithium- or sodium-ion batteries, cathodes in metal-sulfur or metal-oxygen batteries, or as conductive additives. On the other hand, a plethora of biomols., such as quinones, flavins, or carboxylates, contain redox-active groups that can be used as redox-active components in electrodes with very little chem. modification. Biomass-based binders can replace toxic halogenated com. binders to enable a truly sustainable future of energy storage devices. Besides the electrodes, electrolytes and separators may also be synthesized from biomass. In this Review, recent research progress in this rapidly emerging field is summarized with a focus on potentially fully biowaste-derived batteries.
3
National Research Council. The Role of the Chemical Sciences in Finding Alternatives to Critical Resources: A Workshop Summary. The National Academic Press: Washington, DC, 2012. DOI: 10.17226/13366 .
Google Scholar
There is no corresponding record for this reference.
4
Espinoza-Acosta, J. L.; Torres-Chávez, P. I.; Olmedo-Martínez, J. L.; Vega-Rios, A.; Flores-Gallardo, S.; Zaragoza-Contreras, E. A. Lignin in storage and renewable energy applications: A review. J. Energy Chem. 2018, 27, 1422– 1438, DOI: 10.1016/j.jechem.2018.02.015
Google Scholar
There is no corresponding record for this reference.
5
Aro, T.; Fatehi, P. Production and Application of Lignosulfonates and Sulfonated Lignin. ChemSusChem 2017, 10, 1861– 1877, DOI: 10.1002/cssc.201700082
Google Scholar
5
Production and Application of Lignosulfonates and Sulfonated Lignin
Aro, Thomas; Fatehi, Pedram
ChemSusChem (2017), 10 (9), 1861-1877CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
Lignin is the largest reservoir of arom. compds. on earth and has great potential to be used in many industrial applications. Alternative methods to produce lignosulfonates from spent sulfite pulping liquors and kraft lignin from black liquor of kraft pulping process are critically reviewed herein. Furthermore, options to increase the sulfonate contents of lignin-based products are outlined and the industrial attractiveness of them is evaluated. This evaluation includes sulfonation and sulfomethylation of lignin. To increase the sulfomethylation efficiency of lignin, various scenarios, including hydrolysis, oxidn., and hydroxymethylation, were compared. The application of sulfonated lignin-based products is assessed and the impact of the properties of these products on the characteristics of their end-use application is critically evaluated. Sulfonated lignin-based products have been used as dispersants in cement admixts. and dye solns. more than other applications, and their mol. wt. and degree of sulfonation were crucial in detg. their efficiency. The use of lignin-based sulfonated products in composites may result in an increase in the hydrophilicity of some composites, but the sulfonated products may need to be desulfonated with an alkali and/or oxygen prior to their use in composites. To be used as a flocculant, sulfonated lignin-based products may need to be cross-linked to increase their mol. wt. The challenges assocd. with the use of lignin-based products in these applications are comprehensively discussed herein.
6
Ajjan, F. N.; Casado, N.; Rebis, T.; Elfwing, A.; Solin, N.; Mecerreyes, D.; Inganas, O. High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors. J. Mater. Chem. A 2016, 4, 1838– 1847, DOI: 10.1039/C5TA10096H
Google Scholar
6
High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors
Ajjan, F. N.; Casado, N.; Rebis, T.; Elfwing, A.; Solin, N.; Mecerreyes, D.; Inganaes, O.
Journal of Materials Chemistry A: Materials for Energy and Sustainability (2016), 4 (5), 1838-1847CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
Developing sustainable org. electrode materials for energy storage applications is an urgent task. We present a promising candidate based on the use of lignin, the second most abundant biopolymer in nature. This polymer is combined with a conducting polymer, where lignin as a polyanion can behave both as a dopant and surfactant. The synthesis of PEDOT/Lig biocomposites by both oxidative chem. and electrochem. polymn. of EDOT in the presence of lignin sulfonate is presented. The characterization of PEDOT/Lig was performed by UV-Vis-NIR spectroscopy, FTIR IR spectroscopy, thermogravimetric anal., SEM, cyclic voltammetry and galvanostatic charge-discharge. PEDOT doped with lignin doubles the specific capacitance (170.4 F g-1) compared to ref. PEDOT electrodes (80.4 F g-1). The enhanced energy storage performance is a consequence of the addnl. pseudocapacitance generated by the quinone moieties in lignin, which give rise to faradaic reactions. Furthermore PEDOT/Lig is a highly stable biocomposite, retaining about 83% of its electroactivity after 1000 charge/discharge cycles. These results illustrate that the redox doping strategy is a facile and straightforward approach to improve the electroactive performance of PEDOT.
7
Milczarek, G.; Inganas, O. Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks. Science 2012, 335, 1468– 1471, DOI: 10.1126/science.1215159
Google Scholar
7
Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks
Milczarek, Grzegorz; Inganaes, Olle
Science (Washington, DC, United States) (2012), 335 (6075), 1468-1471CODEN: SCIEAS; ISSN:0036-8075. (American Association for the Advancement of Science)
Renewable and cheap materials in electrodes could meet the need for low-cost, intermittent elec. energy storage in a renewable energy system if sufficient charge d. is obtained. Brown liquor, the waste product from paper processing, contains lignin derivs. Polymer cathodes can be prepd. by electrochem. oxidn. of pyrrole to polypyrrole in solns. of lignin derivs. The quinone group in lignin is used for electron and proton storage and exchange during redox cycling, thus combining charge storage in lignin and polypyrrole in an interpenetrating polypyrrole/lignin composite.
8
Ajjan, F. N.; Jafari, M. J.; Rebis, T.; Ederth, T.; Inganas, O. Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material. J. Mater. Chem. A 2015, 3, 12927– 12937, DOI: 10.1039/C5TA00788G
Google Scholar
8
Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material
Ajjan, F. N.; Jafari, M. J.; Rebis, T.; Ederth, T.; Inganaes, O.
Journal of Materials Chemistry A: Materials for Energy and Sustainability (2015), 3 (24), 12927-12937CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
We report spectroelectrochem. studies to investigate the charge storage mechanism of composite polypyrrole/lignin electrodes. Renewable bioorg. electrode materials were produced by electropolymn. of pyrrole in the presence of a water-sol. lignin deriv. acting as a dopant. The resulting composite exhibited enhanced charge storage abilities due to a lignin-based faradaic process, which was expressed after repeated electrochem. redox of the material. The in situ FTIR spectroelectrochem. results show the formation of quinone groups, and reversible oxidn.-redn. of these groups during charge-discharge expts. in the electrode materials. The most significant IR bands include carbonyl absorption near 1705 cm-1, which is attributed to the creation of quinone moieties during oxidn., and absorption at 1045 cm-1 which is due to hydroquinone moieties.
9
Ajjan, F. N.; Vagin, M.; Rebis, T.; Aguirre, L. E.; Ouyang, L.; Inganas, O. Scalable Asymmetric Supercapacitors Based on Hybrid Organic/Biopolymer Electrodes. Adv. Sustainable Syst. 2017, 1, 1700054, DOI: 10.1002/adsu.201700054
Google Scholar
There is no corresponding record for this reference.
10
Geng, X.; Zhang, Y.; Jiao, L.; Yang, L.; Hamel, J.; Giummarella, N.; Henriksson, G.; Zhang, L.; Zhu, H. Bioinspired Ultrastable Lignin Cathode via Graphene Reconfiguration for Energy Storage. ACS Sustainable Chem. Eng. 2017, 5, 3553– 3561, DOI: 10.1021/acssuschemeng.7b00322
Google Scholar
10
Bioinspired Ultrastable Lignin Cathode via Graphene Reconfiguration for Energy Storage
Geng, Xiumei; Zhang, Yelong; Jiao, Li; Yang, Lei; Hamel, Jonathan; Giummarella, Nicola; Henriksson, Gunnar; Zhang, Liming; Zhu, Hongli
ACS Sustainable Chemistry & Engineering (2017), 5 (4), 3553-3561CODEN: ASCECG; ISSN:2168-0485. (American Chemical Society)
Lignin extd. from trees is one of the most abundant biopolymers on Earth. Quinone, a sub-structure in lignin, can be used for energy storage via reversible redox reactions through absorbing and releasing electrons and protons. However, these efforts have encountered hindrances, such as short life cycle, low cycling efficiency, and a high self-discharge rate. All of these issues are related to electrode dissoln. by electrolyte solvents and the insulating nature of lignin. Addressing these crit. challenges, for the first time a reconfigurable and hierarchical graphene cage is used to capture the lignin by mimicking the prey-trapping of venus flytraps. The reconfigurable graphene confines the lignin within the electrode to prevent its dissoln., while acting as a three-dimensional current collector to provide efficient electron transport pathways during the electrochem. reactions. This bioinspired design enables the best cycling performance of lignin reported so far at 88% capacitance retention for 15000 cycles and 211 F g-1 capacitance at a c.d. of 1.0 A g-1. This study demonstrates a feasible and effective strategy for solving the long-term cycling difficulties of lignin-based electrochem. active species, and makes it possible to utilize lignin as an efficient, cheap, and renewable energy storage material.
11
Kim, S. K.; Kim, Y. K.; Lee, H.; Lee, S. B.; Park, H. S. Superior Pseudocapacitive Behavior of Confined Lignin Nanocrystals for Renewable Energy-Storage Materials. ChemSusChem 2014, 7, 1094– 1101, DOI: 10.1002/cssc.201301061
Google Scholar
11
Superior Pseudocapacitive Behavior of Confined Lignin Nanocrystals for Renewable Energy-Storage Materials
Kim, Sung-Kon; Kim, Yun Ki; Lee, Hyunjoo; Lee, Sang Bok; Park, Ho Seok
ChemSusChem (2014), 7 (4), 1094-1101CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
Strong demand for high-performance energy-storage devices has currently motivated the development of emerging capacitive materials that can resolve their crit. challenge (i.e., low energy d.) and that are renewable and inexpensive energy-storage materials from both environmental and economic viewpoints. Herein, the pseudocapacitive behavior of lignin nanocrystals confined on reduced graphene oxides (RGOs) used for renewable energy-storage materials is demonstrated. The excellent capacitive characteristics of the renewable hybrid electrodes were achieved by synergizing the fast and reversible redox charge transfer of surface-confined quinone and the interplay with electron-conducting RGOs. Accordingly, pseudocapacitors with remarkable rate and cyclic performances (∼96% retention after 3000 cycles) showed a max. capacitance of 432 F g-1, which was close to the theor. capacitance of 482 F g-1 and 6-fold higher than that of RGO (93 F g-1). The chem. strategy delineated herein paves the way to develop advanced renewable electrodes for energy-storage applications and understand the redox chem. of electroactive biomaterials.
12
Milczarek, G.; Nowicki, M. Carbon nanotubes/kraft lignin composite: Characterization and charge storage properties. Mater. Res. Bull. 2013, 48, 4032– 4038, DOI: 10.1016/j.materresbull.2013.06.022
Google Scholar
12
Carbon nanotubes/kraft lignin composite: Characterization and charge storage properties
Milczarek, Grzegorz; Nowicki, Marek
Materials Research Bulletin (2013), 48 (10), 4032-4038CODEN: MRBUAC; ISSN:0025-5408. (Elsevier Ltd.)
The results of this study demonstrate the spectral, microscopic and electrochem. properties of multi-walled carbon nanotubes (CNTs) surface-functionalized with kraft lignin (KL). XPS and FT-IR spectroscopy show that the biomol. is effectively adsorbed on the surface of CNTs, leading to an increase in oxygen content and the appearance of spectral features characteristic of highly oxidized polyphenolic compds. The presence of KL makes CNTs easily dispersible in org. (DMSO) and aq. (0.1 M ammonia) solns. Microscopic anal. (SEM and AFM) confirms the effective debundling of CNTs and the presence of densely packed globular structures on the surface of individual nanotubes. Deposition of the CNT/KL composite on the surface of a gold electrode facilitates its electrochem. characterization. This reveals that the CNT-supported biomol. exhibits persistent reversible redox behavior attributed to KL-derived quinone moieties. Therefore the reversible redox activity of the lignin adsorbate can be utilized for charge storage, providing more than a 100% increase in the capacitance of KL-modified carbon nanotubes compared with unmodified ones.
13
Navarro-Suarez, A. M.; Casado, N.; Carretero-Gonźalez, J.; Mecerreyes, D.; Rojo, T. Full-cell quinone/hydroquinone supercapacitors based on partially reduced graphite oxide and lignin/PEDOT electrodes. J. Mater. Chem. A 2017, 5, 7137– 7143, DOI: 10.1039/C7TA00527J
Google Scholar
13
Full-cell quinone/hydroquinone supercapacitors based on partially reduced graphite oxide and lignin/PEDOT electrodes
Navarro-Suarez, Adriana M.; Casado, Nerea; Carretero-Gonzalez, Javier; Mecerreyes, David; Rojo, Teofilo
Journal of Materials Chemistry A: Materials for Energy and Sustainability (2017), 5 (15), 7137-7143CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
The development of new, scalable and inexpensive materials for low-cost and sustainable energy storage devices is intensely pursued. The combination of redox active biopolymers with electron conducting polymers has shown enhanced charge storage properties. However, their performance has just been investigated at the electrode level. Herein, we move a step further by assembling full-cell supercapacitors based on natural lignin (Lig) and partially reduced graphite oxide (prGrO) electrode materials. Both materials evidenced that quinone/hydroquinone redox moieties are able to store and release charge reversibly. The redox properties of lignin were improved by combining it with poly(3,4-ethylenedioxythiophene) (PEDOT). Anal. of the capacitive contributions to the charge storage proved that PEDOT enhanced the lignin's capacitive contribution to the current by 22%. The capacitive contributions were equal to 66% and 75% in Lig/PEDOT blend and prGrO electrodes, resp. We also show for the first time that by distributing equally charges in carbon-biopolymer composite electrodes, a higher capacitance retention, up to 79% after 1000 cycles, is achieved.
14
Liu, L.; Solin, N.; Inganas, O. Scalable lignin/graphite electrodes formed by mechanochemistry. RSC Adv. 2019, 9, 39758– 39767, DOI: 10.1039/C9RA07507K
Google Scholar
14
Scalable lignin/graphite electrodes formed by mechanochemistry
Liu, Lianlian; Solin, Niclas; Inganaes, Olle
RSC Advances (2019), 9 (68), 39758-39767CODEN: RSCACL; ISSN:2046-2069. (Royal Society of Chemistry)
Lignin is a promising candidate for energy storage because of its abundance, wide geog. distribution, and low cost as it is mainly available as a low value product from processing of wood into paper pulp. Lignin contains large amts. of potential quinone groups, which can be oxidized and reduced in a two electron process. This redox reaction makes lignin suitable for charge storage. However, lignin is insulating and therefore conductive materials are necessary in lignin electrodes, for whom the cost of the conductive materials hinders the scalable application. Among the org. conductive materials, graphite is one of the cheapest and is easily acquired from nature. In this work, we combine graphite and lignosulfonate (LS) and fabricate LS/graphite org. electrodes under a solvent-free mech. milling method, without additives. The graphite is sheared into small particles with a size range from 50 nm to 2000 nm. Few-layer graphene is formed during the ball milling process. The LS/graphite hybrid material electrodes with primary stoichiometry of 4/1 (wt./wt.) gives a cond. of 280 S m-1 and discharge capacity of 35 mA h g-1. It is a promising material for the scalable prodn. of LS org. electrodes.
15
Chaleawlert-umpon, S.; Berthold, T.; Wang, X.; Antonietti, M.; Liedel, C. Kraft Lignin as Electrode Material for Sustainable Electrochemical Energy Storage. Adv. Mater. Interfaces 2017, 4, 1700698, DOI: 10.1002/admi.201700698
Google Scholar
There is no corresponding record for this reference.
16
Chaleawlert-umpon, S.; Liedel, C. More sustainable energy storage: lignin based electrodes with glyoxal crosslinking. J. Mater. Chem. A 2017, 5, 24344– 24352, DOI: 10.1039/C7TA07686J
Google Scholar
16
More sustainable energy storage: lignin based electrodes with glyoxal crosslinking
Chaleawlert-umpon, S.; Liedel, C.
Journal of Materials Chemistry A: Materials for Energy and Sustainability (2017), 5 (46), 24344-24352CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
Lignin is a promising material to be used in sustainable energy storage devices. It may act as an active component due to hydroquinone motifs or as a binder in electrodes. While usually it is blended or modified with unsustainable chems., crosslinking with glyoxal is investigated as a new route to obtain more benign electrodes. For combining the advantages of high charge (lignin as an active material) and electrode stability (lignin as a binder), a two-step process is chosen in which lignin-carbon composites are first formed and subsequently crosslinking lignin on the carbon. The crosslinking is discussed of the material as well as influences on charge storage. Final electrodes benefit from combined faradaic and non-faradaic charge storage and reach a capacity of 80 mA h g-1 at a discharge rate of 0.2 A g-1.
17
Che, C.; Vagin, M.; Ail, U.; Gueskine, G.; Phopase, J.; Brooke, R.; Gabrielsson, R.; Jonsson, M. P.; Mak, W. C.; Berggren, M.; Crispin, X. Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage. Adv. Sustainable Syst. 2019, 3, 1900039, DOI: 10.1002/adsu.201900039
Google Scholar
17
Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage
Che, Canyan; Vagin, Mikhail; Ail, Ujwala; Gueskine, Viktor; Phopase, Jaywant; Brooke, Robert; Gabrielsson, Roger; Jonsson, Magnus P.; Mak, Wing Cheung; Berggren, Magnus; Crispin, Xavier
Advanced Sustainable Systems (2019), 3 (9), 1900039CODEN: ASSDAN; ISSN:2366-7486. (Wiley-VCH Verlag GmbH & Co. KGaA)
Lignosulfonate (LS) is a large-scale surplus product of the forest and paper industries, and has primarily been utilized as a low-cost plasticizer in making concrete for the construction industry. LS is an anionic redox-active polyelectrolyte and is a promising candidate to boost the charge capacity of the pos. electrode (positrode) in redox-supercapacitors. Here, the phys.-chem. investigation of how this biopolymer incorporates into the conducting polymer PEDOT matrix, of the positrode, by means of counter-ion exchange is reported. Upon successful incorporation, an optimal access to redox moieties is achieved, which provides a 63% increase of the resulting stored elec. charge by reversible redox interconversion. The effects of pH, ionic strength, and concns., of included components, on the polymer-polymer interactions are optimized to exploit the biopolymer-assocd. redox currents. Further, the explored LS-conducting polymer incorporation strategy, via aq. synthesis, is evaluated in an up-scaling effort toward large-scale elec. energy storage technol. By using an up-scaled prodn. protocol, integration of the biopolymer within the conducting polymer matrix by counter-ion exchange is confirmed and the PEDOT-LS synthesized through optimized strategy reaches an improved charge capacity of 44.6 mAh g-1.
18
Edberg, J.; Inganas, O.; Engquist, I.; Berggren, M. Boosting the capacity of all-organic paper supercapacitors using wood derivatives. J. Mater. Chem. A 2018, 6, 145– 152, DOI: 10.1039/C7TA06810G
Google Scholar
18
Boosting the capacity of all-organic paper supercapacitors using wood derivatives
Edberg, Jesper; Inganaes, Olle; Engquist, Isak; Berggren, Magnus
Journal of Materials Chemistry A: Materials for Energy and Sustainability (2018), 6 (1), 145-152CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
Printed and flexible org. electronics is a steadily expanding field of research and applications. One of the most attractive features of this technol. is the possibility of large area and high throughput prodn. to form low-cost electronics on different flexible substrates. With an increasing demand for sustainable energy prodn., low-cost and large vol. technologies to store high-quality energy become equally important. These devices should be environmentally friendly with respect to their entire life cycle. Supercapacitors and batteries based on paper hold great promise for such applications due to the low cost and abundance of cellulose and other forest-derived components. We report a thick-film paper-supercapacitor system based on cellulose nanofibrils, the mixed ion-electron conducting polymer PEDOT:PSS and sulfonated lignin. We demonstrate that the introduction of sulfonated lignin into the cellulose-conducting polymer system increases the specific capacitance from 110 to 230 F g-1 and the areal capacitance from 160 mF cm-2 to 1 F cm-2. By introducing lignosulfonate also into the electrolyte soln., equil., with respect to the concn. of the redox mol., was established between the electrode and the electrolyte, thus allowing us to perform beyond 700 charge/discharge cycles with no obsd. decrease in performance.
19
Larsson, O.; Said, E.; Berggren, M.; Crispin, X. Insulator Polarization Mechanisms in Polyelectrolyte-Gated Organic Field-Effect Transistors. Adv. Funct. Mater. 2009, 19, 3334– 3341, DOI: 10.1002/adfm.200900588
Google Scholar
19
Insulator Polarization Mechanisms in Polyelectrolyte-Gated Organic Field-Effect Transistors
Larsson, Oscar; Said, Elias; Berggren, Magnus; Crispin, Xavier
Advanced Functional Materials (2009), 19 (20), 3334-3341CODEN: AFMDC6; ISSN:1616-301X. (Wiley-VCH Verlag GmbH & Co. KGaA)
Electrolyte-gated org. field-effect transistors (OFETs) hold promise for robust printed electronics operating at low voltages. The polarization mechanism of thin solid electrolyte films, the gate insulator in such OFETs, is still unclear and appears to limit the transient current characteristics of the transistors. Here, the polarization response of a thin proton membrane, a poly(styrenesulfonic acid) film, is controlled by varying the relative humidity. The formation of the conducting transistor channel follows the polarization of the polyelectrolyte, such that the drain transient current characteristics vs. the time are rationalized by three different polarization mechanisms: the dipolar relaxation at high frequencies, the ionic relaxation (migration) at intermediate frequencies, and the elec. double-layer formation at the polyelectrolyte interfaces at low frequencies. The elec. double layers of polyelectrolyte capacitors are formed in ∼1 μs at humid conditions and an effective capacitance per area of 10 μF cm-2 is obtained at 1 MHz, thus suggesting that this class of OFETs might operate at up to 1 MHz at 1 V.
20
Wang, H.; Zhao, D.; Khan, Z. U.; Puzinas, S.; Jonsson, M. P.; Berggren, M.; Crispin, X. Ionic Thermoelectric Figure of Merit for Charging of Supercapacitors. Adv. Electron. Mater. 2017, 3, 1700013, DOI: 10.1002/aelm.201700013
Google Scholar
There is no corresponding record for this reference.
21
Jiao, F.; Edberg, J.; Zhao, D.; Puzinas, S.; Khan, Z. U.; Mäkie, P.; Naderi, A.; Lindström, T.; Odén, M.; Engquist, I.; Berggren, M.; Crispin, X. Nanofibrillated Cellulose-Based Electrolyte and Electrode for Paper-Based Supercapacitors. Adv. Sustainable Syst. 2018, 2, 1700121, DOI: 10.1002/adsu.201700121
Google Scholar
There is no corresponding record for this reference.
22
Kwon, N. H.; Mouck-Makanda, D.; Fromm, K. M. A Review: Carbon Additives in LiMnPO₄- and LiCoO₂-Based Cathode Composites for Lithium Ion Batteries. Batteries 2018, 4, 50, DOI: 10.3390/batteries4040050
Google Scholar
22
A review: carbon additives in LiMnPO4- and LiCoO2-based cathode composites for lithium ion batteries
Kwon, Nam Hee; Mouck-Makanda, Divine; Fromm, Katharina M.
Batteries (Basel, Switzerland) (2018), 4 (4), 50CODEN: BATTAT; ISSN:2313-0105. (MDPI AG)
A review. Carbon plays a crit. role in improving the electronic cond. of cathodes in lithium ion batteries. Particularly, the characteristics of carbon and its composite with electrode material strongly affect battery properties, governed by electron as well as Li+ ion transport. We have reviewed here various types of carbon materials and org. carbon sources in the prodn. of conductive composites of nano-LiMnPO4 and LiCoO2. Various processes of making these composites with carbon or org. carbon sources and their characterization have been reviewed. Finally, the type and amt. of carbon and the prepn. methods of composites are summarized along with their battery performances and cathode materials. Among the different processes of making a composite, ball milling provided the benefit of dense and homogeneous nanostructured composites, leading to higher tap-d. and thus increasing the volumetric energy densities of cathodes.
23
Chang, W. J.; Lee, G. H.; Cheon, Y. J.; Kim, J. T.; Lee, S. I.; Kim, J.; Kim, M.; Park, W. I.; Lee, Y. J. Direct Observation of Carboxymethyl Cellulose and Styrene–Butadiene Rubber Binder Distribution in Practical Graphite Anodes for Li-Ion Batteries. ACS Appl. Mater. Interfaces 2019, 11 (44), 41330– 41337, DOI: 10.1021/acsami.9b13803
Google Scholar
23
Direct Observation of Carboxymethyl Cellulose and Styrene-Butadiene Rubber Binder Distribution in Practical Graphite Anodes for Li-Ion Batteries
Chang, Won Jun; Lee, Gyu Hyeon; Cheon, Yeong Jun; Kim, Jin Tae; Lee, Sang Il; Kim, Jaehyuk; Kim, Myungseop; Park, Won Il; Lee, Yun Jung
ACS Applied Materials & Interfaces (2019), 11 (44), 41330-41337CODEN: AAMICK; ISSN:1944-8244. (American Chemical Society)
Despite the important role of CM-cellulose (CMC) and styrene-butadiene rubber (SBR) binders in graphite electrodes for Li-ion batteries, the direct anal. of these binders remains challenging, particularly at very low concns. as in practical graphite anodes. In this paper, the systematic investigation is reported of the physiochem. behavior of the CMC and SBR binders and direct observations of their distributions in practical graphite electrodes. The key to this unprecedented capability is combining the advantages of several analytic techniques, including laser-ablation laser-induced break-down spectroscopy, time of flight secondary ion mass spectrometry, and a surface and interfacial cutting anal. system. By correlating the vertical distribution with the adsorption behaviors of the CMC, the study reveals that the CMC migration toward the surface during the drying process depends on the degree of cross-linked binder-graphite network generation, which is detd. by the surface property of graphite and CMC materials. The suggested anal. techniques enable the independent tracing of CMC and SBR, disclosing the different vertical distribution of SBR from that of the CMC binder in our practical graphite anodes. This achievement provides addnl. opportunity to analyze the correlation between the binder distribution and mech. properties of the electrodes.
24
Li, Z.; Ge, Y. Extraction of lignin from sugar cane bagasse and its modification into a high performance dispersant for pesticide formulations. J. Braz. Chem. Soc. 2011, 22, 1866– 1871, DOI: 10.1590/S0103-50532011001000006
Google Scholar
24
Extraction of lignin from sugar cane bagasse and its modification into a high performance dispersant for pesticide formulations
Li, Zhili; Ge, Yuanyuan
Journal of the Brazilian Chemical Society (2011), 22 (10), 1866-1871CODEN: JOCSET; ISSN:0103-5053. (Sociedade Brasileira de Quimica)
In order to effectively utilize a byproduct of non-wood material, lignin was extd. from sugar cane bagasse via acidification of black liquor. The extd. sugar cane bagasse lignin (EBL) was modified by oxidn., hydroxymethylation, and sulfonation into a water-sol. lignosulfonate (EBL-M). It was characterized by IR, UV, GPC and elemental anal. The results showed that the arom. units of EBL-M were kept well and it was effectively sulfonated, that the percentage of S was high as 7.82%. The dispersing efficiency of EBL-M for pesticide formulations was compared with com. dispersants via suspending rate measurement. As expected, EBL-M had the equal optimal dispersing efficiency to kinsperse than other com. lignosulfonates when being used for dimethomorph water dispersible granules. The characterization of mol. wt. and sulfonic group's content of lignosulfonates suggested that the dispersing efficiency increased with higher sulfonic group's content and higher mol. wt. As to being used for tribenuron water dispersible granules, the dispersing efficiency of EBL-M was much close to the com. dispersants.
25
Heitner, C., Dimmel, D. R, Schmidt, J. A, Ed. Lignin and Lignans: Advances in Chemistry; CRC Press Taylor & Francis Group, 2010, DOI: 10.1201/EBK1574444865 .
Google Scholar
There is no corresponding record for this reference.
26
Fergus, B. J.; Goring, D. A. I. The Distribution of Lignin in Birch Wood as Determined by Ultraviolet Microscopy. Holzforschung 1970, 24, 118, DOI: 10.1515/hfsg.1970.24.4.118
Google Scholar
26
Distribution of lignin in birchwood as determined by ultraviolet microscopy
Fergus, Brian J.; Goring, David A. I.
Holzforschung (1970), 24 (4), 118-24CODEN: HOLZAZ; ISSN:0018-3830.
Uv spectroscopy was used to det. the patterns of lignification in birchwood xylem tissues. The lignin contents of the fibers and vessels of white birch were 0.19-0.22 g/g and 0.24-0.28 g/g, resp. The fibers contained 77% of the total lignin in the birch, and the fiber secondary wall contained 77% of the lignin in the fibers and 60% of the lignin in the total wood. The vessel and ray secondary walls contained >81% of the lignin in the xylem.
27
Ail, U.; Jafari, M. J.; Wang, H.; Ederth, T.; Berggren, M.; Crispin, X. Thermoelectric Properties of Polymeric Mixed Conductors. Adv. Funct. Mater. 2016, 26, 6288– 6296, DOI: 10.1002/adfm.201601106
Google Scholar
27
Thermoelectric Properties of Polymeric Mixed Conductors
Ail, Ujwala; Jafari, Mohammad Javad; Wang, Hui; Ederth, Thomas; Berggren, Magnus; Crispin, Xavier
Advanced Functional Materials (2016), 26 (34), 6288-6296CODEN: AFMDC6; ISSN:1616-301X. (Wiley-VCH Verlag GmbH & Co. KGaA)
The thermoelec. (TE) phenomena are intensively explored by the scientific community due to the rather inefficient way energy resources are used with a large fraction of energy wasted in the form of heat. Among various materials, mixed ion-electron conductors (MIEC) are recently being explored as potential thermoelecs., primarily due to their low thermal cond. The combination of electronic and ionic charge carriers in those inorg. or org. materials leads to complex evolution of the thermovoltage (Voc) with time, temp., and/or humidity. One of the most promising org. thermoelec. materials, poly(3,4-ethyelenedioxythiophene)-polystyrene sulfonate (PEDOT-PSS), is an MIEC. A previous study reveals that at high humidity, PEDOT-PSS undergoes an ionic Seebeck effect due to mobile protons. Yet, this phenomenon is not well understood. In this work, the time dependence of the Voc is studied and its behavior from the contribution of both charge carriers (holes and protons) is explained. The presence of a complex reorganization of the charge carriers promoting an internal electrochem. reaction within the polymer film is identified. Interestingly, it is demonstrated that the time dependence behavior of Voc is a way to distinguish between three classes of polymeric materials: electronic conductor, ionic conductor, and mixed ionic-electronic conductor.
28
Lai, W.; Haile, S. M. Impedance Spectroscopy as a Tool for Chemical and Electrochemical Analysis of Mixed Conductors: A Case Study of Ceria. J. Am. Ceram. Soc. 2005, 88, 2979– 2997, DOI: 10.1111/j.1551-2916.2005.00740.x
Google Scholar
28
Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria
Lai, Wei; Haile, Sossina M.
Journal of the American Ceramic Society (2005), 88 (11), 2979-2997CODEN: JACTAW; ISSN:0002-7820. (Blackwell Publishing, Inc.)
The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quant. compared with exptl. data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of elec. and thermodn. properties is extd. solely from the measurement of impedance spectra over wide oxygen partial pressure and temp. ranges. Here, the oxygen partial pressure was varied from air |pO2 = 0.21 atm| to H2 |pO2 = 10-31 atm|, and the temp. was varied from 500° to 650°C. It was essential for this anal. that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total cond. but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features assocd. with a half tear-drop-shaped element. Parameters derived from quant. fitting of the impedance spectra include the concn. of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of redn. In addn., the electrochem. behavior of O2 and H2 at the Pt|ceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochem. reaction that is rate limited by the dissocd. adsorption/diffusion of oxygen species on the Pt electrode, similar to Pt|YSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys a p-1/4O2 dependence, with an activation energy that is similar to that measured for the electronic cond. These results suggest that ceria is electrochem. active for hydrogen electro-oxidn. and that the reaction is limited by the rate of removal of electrons from the ceria surface.
29
Hasan, M. H. M.; Ramli, H.; Ong, S. K.; Manroshan, S. Study on the effect of ball milling time towards the stability of carbon black dispersion and carbon black masterbatch properties. AIP Conference Proceedings 1985, 040014, 2018, DOI: DOI: 10.1063/1.5047191 .
Google Scholar
There is no corresponding record for this reference.

Cited By

Click to copy section linkSection link copied!

Explore this article's citation statements on scite.ai

This article is cited by 26 publications.

Van Chinh Tran, Gabriella Mastantuoni, Jonas Garemark, Christopher H. Dreimol, Xin Wang, Magnus Berggren, Qi Zhou, Renee Kroon, Isak Engquist. Interconnecting EDOT-Based Polymers with Native Lignin toward Enhanced Charge Storage in Conductive Wood. ACS Applied Materials & Interfaces 2024, 16 (49) , 68416-68425. https://doi.org/10.1021/acsami.4c16298
Kanmani Moorthi, Sakar Mohan. Developments in Sustainable Green Supercapacitors: A Minireview. Energy & Fuels 2024, 38 (23) , 22719-22745. https://doi.org/10.1021/acs.energyfuels.4c04548
Eunkyoung Kim, Chen-yu Chen, Jun Wei Phua, Alessandra Napolitano, William E. Bentley, Gregory F. Payne. Operando Spectroelectrochemical Characterization Shows that the Dynamic Flow of Electrons through Melanin Involves Its Redox-State Switching. The Journal of Physical Chemistry C 2023, 127 (40) , 19979-19994. https://doi.org/10.1021/acs.jpcc.3c05026
Zhoveta Yhobu, Aisha Siddiqa, Mahesh Padaki, Srinivasa Budagumpi, Nagaraju D. H.. Lignocellulose Biopolymers and Electronically Conducting Polymers: Toward Sustainable Energy Storage Applications. Energy & Fuels 2022, 36 (24) , 14625-14656. https://doi.org/10.1021/acs.energyfuels.2c03101
Muhammad Shahid Sharif, Zuhra Tayyab, Sajid Rauf, Muhammad Ahsan Masood, MAK Yousaf Shah, Muhammad Tayyab, Abdullah N Alodhayb, Bin Zhu. Redefining electrolyte efficiency: bridging the gap with a systematic samarium–copper co-doping approach for optimized conductivity in advanced semiconductor ionic fuel cell. Materials Futures 2025, 4 (2) , 025102. https://doi.org/10.1088/2752-5724/adbcc9
Zhongda Yang, Jian Li, Chenglei Jiang, Bingyue Li, Yanling Guo, Yangwei Wang, Jianing Zhao. Technical and experimental studies on the preparation of lignin/PVA specially shaped carbon electrodes based on frozen DIW technology. Diamond and Related Materials 2025, 155 , 112361. https://doi.org/10.1016/j.diamond.2025.112361
Mohsen Mohammadi, Saeed Mardi, Jaywant Phopase, Filippa Wentz, Jibin J. Samuel, Ujwala Ail, Magnus Berggren, Reverant Crispin, Klas Tybrandt, Aiman Rahmanudin. Make it flow from solid to liquid: Redox-active electrofluids for intrinsically stretchable batteries. Science Advances 2025, 11 (15) https://doi.org/10.1126/sciadv.adr9010
Ujwala Ail, Jakob Backe, Zia Ullah Khan, Rui Shu, Jaywant Phopase, Magnus Berggren, Reverant Crispin. Safe and stable Zn-lignin batteries with a biopolymer based hydrogel electrolyte. Journal of Materials Chemistry A 2025, 13 (4) , 2974-2986. https://doi.org/10.1039/D4TA07213H
Divyaratan Kumar, Leandro R. Franco, Nicole Abdou, Rui Shu, Anna Martinelli, C. Moyses Araujo, Johannes Gladisch, Viktor Gueskine, Reverant Crispin, Ziyauddin Khan. Water‐in‐Polymer Salt Electrolyte for Long‐Life Rechargeable Aqueous Zinc‐Lignin Battery. ENERGY & ENVIRONMENTAL MATERIALS 2025, 8 (1) https://doi.org/10.1002/eem2.12752
Bingjie Zhou, Yuankai Shao, Weikang Zhu, Shuoyao Yin, Zhenguo Li, Xiaoning Ren, Anqi Dong, Xi Liu, Yatao Liu, Yaodong Hao, Bin Ren, Wei Liu. Synergistic enhancement of pseudocapacitance behavior in supercapacitors through porous carbon and lignosulfonate integration. Journal of Power Sources Advances 2025, 31 , 100165. https://doi.org/10.1016/j.powera.2024.100165
Aiman Rahmanudin, Mohsen Mohammadi, Patrik Isacsson, Yuyang Li, Laura Seufert, Nara Kim, Saeed Mardi, Isak Engquist, Reverant Crispin, Klas Tybrandt. Stretchable and biodegradable plant-based redox-diffusion batteries. Materials Horizons 2024, 11 (18) , 4400-4412. https://doi.org/10.1039/D4MH00170B
Qingshuang Zhao, Ting Xu, Kun Liu, Haishun Du, Meng Zhang, Yaxuan Wang, Leixin Yang, Han Zhang, Xuan Wang, Chuanling Si. Biomass-based functional materials for rechargeable Zn-ion batteries. Energy Storage Materials 2024, 71 , 103605. https://doi.org/10.1016/j.ensm.2024.103605
Md. Merajul Islam. Lignocellulosic biomass-based materials: a promising resource for viable energy storage. Sustainable Energy & Fuels 2024, 8 (9) , 1823-1871. https://doi.org/10.1039/D4SE00038B
Hye Min Kwon, Nak Hyun Kim, Suk Joon Hong, Woo Hyeong Sim, Merry Lee, Samick Son, Ki Yoon Bae, Ji Young Kim, Duck Hyun Youn, Yong Sik Kim, Hyung Mo Jeong. Uniform Li-metal growth on renewable lignin with lithiophilic functional groups derived from wood for high-performance Li-metal batteries. Surfaces and Interfaces 2024, 44 , 103643. https://doi.org/10.1016/j.surfin.2023.103643
Ujwala Ail, Jakob Backe, Magnus Berggren, Xavier Crispin, Jaywant Phopase. Lignin Functionalized with Catechol for Large‐Scale Organic Electrodes in Bio‐Based Batteries. Advanced Energy and Sustainability Research 2023, 4 (12) https://doi.org/10.1002/aesr.202300146
Xueru Yang, Yufei Zhang, Minghui Ye, Yongchao Tang, Zhipeng Wen, Xiaoqing Liu, Cheng Chao Li. Renewable lignin and its macromolecule derivatives: an emerging platform toward sustainable electrochemical energy storage. Green Chemistry 2023, 25 (11) , 4154-4179. https://doi.org/10.1039/D3GC00565H
Divyaratan Kumar, Ujwala Ail, Zhixing Wu, Emma M. Björk, Magnus Berggren, Viktor Gueskine, Xavier Crispin, Ziyauddin Khan. Zinc salt in “Water‐in‐Polymer Salt Electrolyte” for Zinc‐Lignin Batteries: Electroactivity of the Lignin Cathode. Advanced Sustainable Systems 2023, 7 (4) https://doi.org/10.1002/adsu.202200433
Ujwala Ail, Jakob Nilsson, Mattias Jansson, Irina A. Buyanova, Zhixing Wu, Emma Björk, Magnus Berggren, Xavier Crispin. Optimization of Non‐Pyrolyzed Lignin Electrodes for Sustainable Batteries. Advanced Sustainable Systems 2023, 7 (2) https://doi.org/10.1002/adsu.202200396
Ruitong Hong, Zile Zhang, Shenrui Pan, Yu Chen, Huan Wang, Wenli Zhang, Xuliang Lin. Construction of PVA-lignosulfonate hydrogels for improved mechanical performances and all-in-one flexible supercapacitors. International Journal of Biological Macromolecules 2023, 225 , 1494-1504. https://doi.org/10.1016/j.ijbiomac.2022.11.206
Divyaratan Kumar, Ziyauddin Khan, Ujwala Ail, Jaywant Phopase, Magnus Berggren, Viktor Gueskine, Xavier Crispin. Self‐Discharge in Batteries Based on Lignin and Water‐in‐Polymer Salt Electrolyte. Advanced Energy and Sustainability Research 2022, 3 (10) https://doi.org/10.1002/aesr.202200073
Lianlian Liu, Sergej Masich, Emma M. Björk, Niclas Solin, Olle Inganäs. Black Charcoal for Green and Scalable Wooden Electrodes for Supercapabatteries. Energy Technology 2022, 10 (3) https://doi.org/10.1002/ente.202101072
Ziyauddin Khan, Ujwala Ail, Fatima Nadia Ajjan, Jaywant Phopase, Zia Ullah Khan, Nara Kim, Jakob Nilsson, Olle Inganäs, Magnus Berggren, Xavier Crispin. Water‐in‐Polymer Salt Electrolyte for Slow Self‐Discharge in Organic Batteries. Advanced Energy and Sustainability Research 2022, 3 (1) https://doi.org/10.1002/aesr.202100165
Bingjie Zhou, Yuankai Shao, Zhenguo Li, Bin Ren, Xiaoning Ren, Kaixiang Li, Qingling Liu. Lignosulfonate Boost the Nitrogen-Dopped Carbon Supercapacitor Pseudocapacitance Behavior. SSRN Electronic Journal 2022, 8 https://doi.org/10.2139/ssrn.4201372
Bingjie Zhou, Zhenguo Li, Wei Liu, Yuankai Shao, Xiaoning Ren, Congjie Lv, Qingling Liu. Hierarchical porous carbon/Kraft lignin composite with significantly improved superior pseudocapacitive behavior. Electrochimica Acta 2021, 398 , 139307. https://doi.org/10.1016/j.electacta.2021.139307
Lianlian Liu, Niclas Solin, Olle Inganäs. Bio Based Batteries. Advanced Energy Materials 2021, 11 (43) https://doi.org/10.1002/aenm.202003713
Weisheng Yang, Yifei Qu, Bingjie Zhou, Chang Li, Liang Jiao, Hongqi Dai. Value-added utilization of lignin-derived aromatic oligomers as renewable charge-storage materials. Industrial Crops and Products 2021, 171 , 113848. https://doi.org/10.1016/j.indcrop.2021.113848

Download PDF

Get e-Alerts

ACS Sustainable Chemistry & Engineering

Cite this: ACS Sustainable Chem. Eng. 2020, 8, 49, 17933–17944

Click to copy citationCitation copied!

https://doi.org/10.1021/acssuschemeng.0c05397

Published November 30, 2020

Article Views

Altmetric

Citations

Learn about these metrics

Article Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.

Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.

The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated.

Abstract
High Resolution Image
Download MS PowerPoint Slide
Figure 1
Figure 1. (a) Chemical structure of LS, (b) sketch of the LS-conducting polymer composite, where the electrons can pass through the composite by hopping between adjacent conducting polymer chains (dark blue rectangles) and reach the redox quinone site on the LS (red color lines). The area reachable by the electron is illustrated as light blue color area around the polymer chains, which when overlapping with another polymer chains ensure transport or overlapping with LS ensure its local redox activity. The bottom inset illustrates the redox reaction of lignin. (c) Sketch of the kraft lignin-carbon nanoparticle composite displaying a much lower overlap between the area reachable by the electron and lignin. Only this interfacial volume would display the electrochemical redox process of lignin.
High Resolution Image
Download MS PowerPoint Slide
Figure 2
Figure 2. (a) Scheme of desulfonation of LS, (b) relative distribution of molecular weight versus logarithmic molecular weight for LS and DSLS in water and eluent.
High Resolution Image
Download MS PowerPoint Slide
Figure 3
Figure 3. SEM images and contact angle of a water drop for (a) LS layer, (b) DSLS layer, and (c) KL layer. The inset picture illustrates the water solution/slurry of different types of lignin samples. Bode plots of LS (d) and DSLS layers (e) at different relative humidity values.
High Resolution Image
Download MS PowerPoint Slide
Figure 4
Figure 4. (a) Composite electrodes dipped in water for 2 h, (b) the UV–vis spectra of the water after 2 h of dipping the composite electrodes, (c–e) the Bode plots at different relative humidity values for KL/C, LS/C, and DSLS/C samples, respectively.
High Resolution Image
Download MS PowerPoint Slide
Figure 5
Figure 5. Panels (a) and (b) are the CV and the galvanostatic discharge plots of the manually mixed DSLS/C composites, (c–e) show the comparison of the manually mixed and ball milled DSLS/C composites in their CV, galvanostatic discharge, and the capacity versus the charging rate.
High Resolution Image
Download MS PowerPoint Slide
Figure 6
Figure 6. (a, b) SEM images of the manually mixed and ball milled DSLS/C composites respectively showing the regions analyzed by EDX. (c) The comparison of the carbon mass % and oxygen mass % at different regions on the surface for manually mixed and ball milled DSLS/C composites.
High Resolution Image
Download MS PowerPoint Slide
Figure 7
Figure 7. (a) Capacity vs charging rates for composite electrodes with different ratios of carbon and DSLS, (b) the galvanostatic discharge plot at 1 A/g charging rate for DSLS/C (1:1) samples milled for different durations, (c) and (d) show the cyclic voltammetry at 10 mV/s scan rate, the capacity versus charging rate for DS-LS/C (1:1) sample, where the carbon type was varied, (e) galvanostatic charge–discharge stability (cycle) of the DSLS/C electrode of composition of 1:1 with a charging rate of 1 A/g in ambient condition and (f) self-discharge study of the electrode in 0.1 M HClO₄ in nitrogen atmosphere.
High Resolution Image
Download MS PowerPoint Slide
Figure 8
Figure 8. (a) Maximum capacity reported of lignin-based electrodes versus the percentage of capacity retention after 100 cycles for various studies found in the literature: LS/graphite, (14) LS/PAAQ/PEDOT, (9) KL/C, (15,16) KL/CNT, (12) LS/RGO, (11) and LS/PEDOT. (6) Conducting polymers composites are represented by open square symbol, and the composites with other carbon materials are shown with filled square symbol. The data from the present study are shown in blue filled square symbol. (b) CV of the DSLS-C electrode having a 1:1 composition along with 6 wt % binder. The measurement was done in 0.1 M HClO₄ at a scan rate of 5 mV/s. (c) Comparison of the total capacity and deconvoluted contributions (non-Faradaic from carbon and Faradaic from lignin with the literature data for the points related to KL/C). (15) (d) The discharge plots at different charging rates for the DSLS-C composite.
High Resolution Image
Download MS PowerPoint Slide
References
This article references 29 other publications.
1. 1
  Barnes, F., Levine, J., Ed. Large Energy Storage Systems Handbook; CRC Press: Boca Raton, 2011, DOI: 10.1201/b10778 .
  There is no corresponding record for this reference.
2. 2
  Liedel, C. Sustainable Battery Materials from Biomass. ChemSusChem 2020, 13, 2110– 2141, DOI: 10.1002/cssc.201903577
  2
  Sustainable Battery Materials from Biomass
  Liedel, Clemens
  ChemSusChem (2020), 13 (9), 2110-2141CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
  A review. Sustainable sources of energy have been identified as a possible way out of today's oil dependency and are being rapidly developed. In contrast, storage of energy to a large extent still relies on heavy metals in batteries. Esp. when built from biomass-derived orgs., org. batteries are promising alternatives and pave the way towards truly sustainable energy storage. First described in 2008, research on biomass-derived electrodes has been taken up by a multitude of researchers worldwide. Nowadays, in principle, electrodes in batteries could be composed of all kinds of carbonized and noncarbonized biomass: On one hand, all kinds of (waste) biomass may be carbonized and used in anodes of lithium- or sodium-ion batteries, cathodes in metal-sulfur or metal-oxygen batteries, or as conductive additives. On the other hand, a plethora of biomols., such as quinones, flavins, or carboxylates, contain redox-active groups that can be used as redox-active components in electrodes with very little chem. modification. Biomass-based binders can replace toxic halogenated com. binders to enable a truly sustainable future of energy storage devices. Besides the electrodes, electrolytes and separators may also be synthesized from biomass. In this Review, recent research progress in this rapidly emerging field is summarized with a focus on potentially fully biowaste-derived batteries.
3. 3
  National Research Council. The Role of the Chemical Sciences in Finding Alternatives to Critical Resources: A Workshop Summary. The National Academic Press: Washington, DC, 2012. DOI: 10.17226/13366 .
  There is no corresponding record for this reference.
4. 4
  Espinoza-Acosta, J. L.; Torres-Chávez, P. I.; Olmedo-Martínez, J. L.; Vega-Rios, A.; Flores-Gallardo, S.; Zaragoza-Contreras, E. A. Lignin in storage and renewable energy applications: A review. J. Energy Chem. 2018, 27, 1422– 1438, DOI: 10.1016/j.jechem.2018.02.015
  There is no corresponding record for this reference.
5. 5
  Aro, T.; Fatehi, P. Production and Application of Lignosulfonates and Sulfonated Lignin. ChemSusChem 2017, 10, 1861– 1877, DOI: 10.1002/cssc.201700082
  5
  Production and Application of Lignosulfonates and Sulfonated Lignin
  Aro, Thomas; Fatehi, Pedram
  ChemSusChem (2017), 10 (9), 1861-1877CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
  Lignin is the largest reservoir of arom. compds. on earth and has great potential to be used in many industrial applications. Alternative methods to produce lignosulfonates from spent sulfite pulping liquors and kraft lignin from black liquor of kraft pulping process are critically reviewed herein. Furthermore, options to increase the sulfonate contents of lignin-based products are outlined and the industrial attractiveness of them is evaluated. This evaluation includes sulfonation and sulfomethylation of lignin. To increase the sulfomethylation efficiency of lignin, various scenarios, including hydrolysis, oxidn., and hydroxymethylation, were compared. The application of sulfonated lignin-based products is assessed and the impact of the properties of these products on the characteristics of their end-use application is critically evaluated. Sulfonated lignin-based products have been used as dispersants in cement admixts. and dye solns. more than other applications, and their mol. wt. and degree of sulfonation were crucial in detg. their efficiency. The use of lignin-based sulfonated products in composites may result in an increase in the hydrophilicity of some composites, but the sulfonated products may need to be desulfonated with an alkali and/or oxygen prior to their use in composites. To be used as a flocculant, sulfonated lignin-based products may need to be cross-linked to increase their mol. wt. The challenges assocd. with the use of lignin-based products in these applications are comprehensively discussed herein.
6. 6
  Ajjan, F. N.; Casado, N.; Rebis, T.; Elfwing, A.; Solin, N.; Mecerreyes, D.; Inganas, O. High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors. J. Mater. Chem. A 2016, 4, 1838– 1847, DOI: 10.1039/C5TA10096H
  6
  High performance PEDOT/lignin biopolymer composites for electrochemical supercapacitors
  Ajjan, F. N.; Casado, N.; Rebis, T.; Elfwing, A.; Solin, N.; Mecerreyes, D.; Inganaes, O.
  Journal of Materials Chemistry A: Materials for Energy and Sustainability (2016), 4 (5), 1838-1847CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
  Developing sustainable org. electrode materials for energy storage applications is an urgent task. We present a promising candidate based on the use of lignin, the second most abundant biopolymer in nature. This polymer is combined with a conducting polymer, where lignin as a polyanion can behave both as a dopant and surfactant. The synthesis of PEDOT/Lig biocomposites by both oxidative chem. and electrochem. polymn. of EDOT in the presence of lignin sulfonate is presented. The characterization of PEDOT/Lig was performed by UV-Vis-NIR spectroscopy, FTIR IR spectroscopy, thermogravimetric anal., SEM, cyclic voltammetry and galvanostatic charge-discharge. PEDOT doped with lignin doubles the specific capacitance (170.4 F g-1) compared to ref. PEDOT electrodes (80.4 F g-1). The enhanced energy storage performance is a consequence of the addnl. pseudocapacitance generated by the quinone moieties in lignin, which give rise to faradaic reactions. Furthermore PEDOT/Lig is a highly stable biocomposite, retaining about 83% of its electroactivity after 1000 charge/discharge cycles. These results illustrate that the redox doping strategy is a facile and straightforward approach to improve the electroactive performance of PEDOT.
7. 7
  Milczarek, G.; Inganas, O. Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks. Science 2012, 335, 1468– 1471, DOI: 10.1126/science.1215159
  7
  Renewable Cathode Materials from Biopolymer/Conjugated Polymer Interpenetrating Networks
  Milczarek, Grzegorz; Inganaes, Olle
  Science (Washington, DC, United States) (2012), 335 (6075), 1468-1471CODEN: SCIEAS; ISSN:0036-8075. (American Association for the Advancement of Science)
  Renewable and cheap materials in electrodes could meet the need for low-cost, intermittent elec. energy storage in a renewable energy system if sufficient charge d. is obtained. Brown liquor, the waste product from paper processing, contains lignin derivs. Polymer cathodes can be prepd. by electrochem. oxidn. of pyrrole to polypyrrole in solns. of lignin derivs. The quinone group in lignin is used for electron and proton storage and exchange during redox cycling, thus combining charge storage in lignin and polypyrrole in an interpenetrating polypyrrole/lignin composite.
8. 8
  Ajjan, F. N.; Jafari, M. J.; Rebis, T.; Ederth, T.; Inganas, O. Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material. J. Mater. Chem. A 2015, 3, 12927– 12937, DOI: 10.1039/C5TA00788G
  8
  Spectroelectrochemical investigation of redox states in a polypyrrole/lignin composite electrode material
  Ajjan, F. N.; Jafari, M. J.; Rebis, T.; Ederth, T.; Inganaes, O.
  Journal of Materials Chemistry A: Materials for Energy and Sustainability (2015), 3 (24), 12927-12937CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
  We report spectroelectrochem. studies to investigate the charge storage mechanism of composite polypyrrole/lignin electrodes. Renewable bioorg. electrode materials were produced by electropolymn. of pyrrole in the presence of a water-sol. lignin deriv. acting as a dopant. The resulting composite exhibited enhanced charge storage abilities due to a lignin-based faradaic process, which was expressed after repeated electrochem. redox of the material. The in situ FTIR spectroelectrochem. results show the formation of quinone groups, and reversible oxidn.-redn. of these groups during charge-discharge expts. in the electrode materials. The most significant IR bands include carbonyl absorption near 1705 cm-1, which is attributed to the creation of quinone moieties during oxidn., and absorption at 1045 cm-1 which is due to hydroquinone moieties.
9. 9
  Ajjan, F. N.; Vagin, M.; Rebis, T.; Aguirre, L. E.; Ouyang, L.; Inganas, O. Scalable Asymmetric Supercapacitors Based on Hybrid Organic/Biopolymer Electrodes. Adv. Sustainable Syst. 2017, 1, 1700054, DOI: 10.1002/adsu.201700054
  There is no corresponding record for this reference.
10. 10
  Geng, X.; Zhang, Y.; Jiao, L.; Yang, L.; Hamel, J.; Giummarella, N.; Henriksson, G.; Zhang, L.; Zhu, H. Bioinspired Ultrastable Lignin Cathode via Graphene Reconfiguration for Energy Storage. ACS Sustainable Chem. Eng. 2017, 5, 3553– 3561, DOI: 10.1021/acssuschemeng.7b00322
  10
  Bioinspired Ultrastable Lignin Cathode via Graphene Reconfiguration for Energy Storage
  Geng, Xiumei; Zhang, Yelong; Jiao, Li; Yang, Lei; Hamel, Jonathan; Giummarella, Nicola; Henriksson, Gunnar; Zhang, Liming; Zhu, Hongli
  ACS Sustainable Chemistry & Engineering (2017), 5 (4), 3553-3561CODEN: ASCECG; ISSN:2168-0485. (American Chemical Society)
  Lignin extd. from trees is one of the most abundant biopolymers on Earth. Quinone, a sub-structure in lignin, can be used for energy storage via reversible redox reactions through absorbing and releasing electrons and protons. However, these efforts have encountered hindrances, such as short life cycle, low cycling efficiency, and a high self-discharge rate. All of these issues are related to electrode dissoln. by electrolyte solvents and the insulating nature of lignin. Addressing these crit. challenges, for the first time a reconfigurable and hierarchical graphene cage is used to capture the lignin by mimicking the prey-trapping of venus flytraps. The reconfigurable graphene confines the lignin within the electrode to prevent its dissoln., while acting as a three-dimensional current collector to provide efficient electron transport pathways during the electrochem. reactions. This bioinspired design enables the best cycling performance of lignin reported so far at 88% capacitance retention for 15000 cycles and 211 F g-1 capacitance at a c.d. of 1.0 A g-1. This study demonstrates a feasible and effective strategy for solving the long-term cycling difficulties of lignin-based electrochem. active species, and makes it possible to utilize lignin as an efficient, cheap, and renewable energy storage material.
11. 11
  Kim, S. K.; Kim, Y. K.; Lee, H.; Lee, S. B.; Park, H. S. Superior Pseudocapacitive Behavior of Confined Lignin Nanocrystals for Renewable Energy-Storage Materials. ChemSusChem 2014, 7, 1094– 1101, DOI: 10.1002/cssc.201301061
  11
  Superior Pseudocapacitive Behavior of Confined Lignin Nanocrystals for Renewable Energy-Storage Materials
  Kim, Sung-Kon; Kim, Yun Ki; Lee, Hyunjoo; Lee, Sang Bok; Park, Ho Seok
  ChemSusChem (2014), 7 (4), 1094-1101CODEN: CHEMIZ; ISSN:1864-5631. (Wiley-VCH Verlag GmbH & Co. KGaA)
  Strong demand for high-performance energy-storage devices has currently motivated the development of emerging capacitive materials that can resolve their crit. challenge (i.e., low energy d.) and that are renewable and inexpensive energy-storage materials from both environmental and economic viewpoints. Herein, the pseudocapacitive behavior of lignin nanocrystals confined on reduced graphene oxides (RGOs) used for renewable energy-storage materials is demonstrated. The excellent capacitive characteristics of the renewable hybrid electrodes were achieved by synergizing the fast and reversible redox charge transfer of surface-confined quinone and the interplay with electron-conducting RGOs. Accordingly, pseudocapacitors with remarkable rate and cyclic performances (∼96% retention after 3000 cycles) showed a max. capacitance of 432 F g-1, which was close to the theor. capacitance of 482 F g-1 and 6-fold higher than that of RGO (93 F g-1). The chem. strategy delineated herein paves the way to develop advanced renewable electrodes for energy-storage applications and understand the redox chem. of electroactive biomaterials.
12. 12
  Milczarek, G.; Nowicki, M. Carbon nanotubes/kraft lignin composite: Characterization and charge storage properties. Mater. Res. Bull. 2013, 48, 4032– 4038, DOI: 10.1016/j.materresbull.2013.06.022
  12
  Carbon nanotubes/kraft lignin composite: Characterization and charge storage properties
  Milczarek, Grzegorz; Nowicki, Marek
  Materials Research Bulletin (2013), 48 (10), 4032-4038CODEN: MRBUAC; ISSN:0025-5408. (Elsevier Ltd.)
  The results of this study demonstrate the spectral, microscopic and electrochem. properties of multi-walled carbon nanotubes (CNTs) surface-functionalized with kraft lignin (KL). XPS and FT-IR spectroscopy show that the biomol. is effectively adsorbed on the surface of CNTs, leading to an increase in oxygen content and the appearance of spectral features characteristic of highly oxidized polyphenolic compds. The presence of KL makes CNTs easily dispersible in org. (DMSO) and aq. (0.1 M ammonia) solns. Microscopic anal. (SEM and AFM) confirms the effective debundling of CNTs and the presence of densely packed globular structures on the surface of individual nanotubes. Deposition of the CNT/KL composite on the surface of a gold electrode facilitates its electrochem. characterization. This reveals that the CNT-supported biomol. exhibits persistent reversible redox behavior attributed to KL-derived quinone moieties. Therefore the reversible redox activity of the lignin adsorbate can be utilized for charge storage, providing more than a 100% increase in the capacitance of KL-modified carbon nanotubes compared with unmodified ones.
13. 13
  Navarro-Suarez, A. M.; Casado, N.; Carretero-Gonźalez, J.; Mecerreyes, D.; Rojo, T. Full-cell quinone/hydroquinone supercapacitors based on partially reduced graphite oxide and lignin/PEDOT electrodes. J. Mater. Chem. A 2017, 5, 7137– 7143, DOI: 10.1039/C7TA00527J
  13
  Full-cell quinone/hydroquinone supercapacitors based on partially reduced graphite oxide and lignin/PEDOT electrodes
  Navarro-Suarez, Adriana M.; Casado, Nerea; Carretero-Gonzalez, Javier; Mecerreyes, David; Rojo, Teofilo
  Journal of Materials Chemistry A: Materials for Energy and Sustainability (2017), 5 (15), 7137-7143CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
  The development of new, scalable and inexpensive materials for low-cost and sustainable energy storage devices is intensely pursued. The combination of redox active biopolymers with electron conducting polymers has shown enhanced charge storage properties. However, their performance has just been investigated at the electrode level. Herein, we move a step further by assembling full-cell supercapacitors based on natural lignin (Lig) and partially reduced graphite oxide (prGrO) electrode materials. Both materials evidenced that quinone/hydroquinone redox moieties are able to store and release charge reversibly. The redox properties of lignin were improved by combining it with poly(3,4-ethylenedioxythiophene) (PEDOT). Anal. of the capacitive contributions to the charge storage proved that PEDOT enhanced the lignin's capacitive contribution to the current by 22%. The capacitive contributions were equal to 66% and 75% in Lig/PEDOT blend and prGrO electrodes, resp. We also show for the first time that by distributing equally charges in carbon-biopolymer composite electrodes, a higher capacitance retention, up to 79% after 1000 cycles, is achieved.
14. 14
  Liu, L.; Solin, N.; Inganas, O. Scalable lignin/graphite electrodes formed by mechanochemistry. RSC Adv. 2019, 9, 39758– 39767, DOI: 10.1039/C9RA07507K
  14
  Scalable lignin/graphite electrodes formed by mechanochemistry
  Liu, Lianlian; Solin, Niclas; Inganaes, Olle
  RSC Advances (2019), 9 (68), 39758-39767CODEN: RSCACL; ISSN:2046-2069. (Royal Society of Chemistry)
  Lignin is a promising candidate for energy storage because of its abundance, wide geog. distribution, and low cost as it is mainly available as a low value product from processing of wood into paper pulp. Lignin contains large amts. of potential quinone groups, which can be oxidized and reduced in a two electron process. This redox reaction makes lignin suitable for charge storage. However, lignin is insulating and therefore conductive materials are necessary in lignin electrodes, for whom the cost of the conductive materials hinders the scalable application. Among the org. conductive materials, graphite is one of the cheapest and is easily acquired from nature. In this work, we combine graphite and lignosulfonate (LS) and fabricate LS/graphite org. electrodes under a solvent-free mech. milling method, without additives. The graphite is sheared into small particles with a size range from 50 nm to 2000 nm. Few-layer graphene is formed during the ball milling process. The LS/graphite hybrid material electrodes with primary stoichiometry of 4/1 (wt./wt.) gives a cond. of 280 S m-1 and discharge capacity of 35 mA h g-1. It is a promising material for the scalable prodn. of LS org. electrodes.
15. 15
  Chaleawlert-umpon, S.; Berthold, T.; Wang, X.; Antonietti, M.; Liedel, C. Kraft Lignin as Electrode Material for Sustainable Electrochemical Energy Storage. Adv. Mater. Interfaces 2017, 4, 1700698, DOI: 10.1002/admi.201700698
  There is no corresponding record for this reference.
16. 16
  Chaleawlert-umpon, S.; Liedel, C. More sustainable energy storage: lignin based electrodes with glyoxal crosslinking. J. Mater. Chem. A 2017, 5, 24344– 24352, DOI: 10.1039/C7TA07686J
  16
  More sustainable energy storage: lignin based electrodes with glyoxal crosslinking
  Chaleawlert-umpon, S.; Liedel, C.
  Journal of Materials Chemistry A: Materials for Energy and Sustainability (2017), 5 (46), 24344-24352CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
  Lignin is a promising material to be used in sustainable energy storage devices. It may act as an active component due to hydroquinone motifs or as a binder in electrodes. While usually it is blended or modified with unsustainable chems., crosslinking with glyoxal is investigated as a new route to obtain more benign electrodes. For combining the advantages of high charge (lignin as an active material) and electrode stability (lignin as a binder), a two-step process is chosen in which lignin-carbon composites are first formed and subsequently crosslinking lignin on the carbon. The crosslinking is discussed of the material as well as influences on charge storage. Final electrodes benefit from combined faradaic and non-faradaic charge storage and reach a capacity of 80 mA h g-1 at a discharge rate of 0.2 A g-1.
17. 17
  Che, C.; Vagin, M.; Ail, U.; Gueskine, G.; Phopase, J.; Brooke, R.; Gabrielsson, R.; Jonsson, M. P.; Mak, W. C.; Berggren, M.; Crispin, X. Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage. Adv. Sustainable Syst. 2019, 3, 1900039, DOI: 10.1002/adsu.201900039
  17
  Twinning Lignosulfonate with a Conducting Polymer via Counter-Ion Exchange for Large-Scale Electrical Storage
  Che, Canyan; Vagin, Mikhail; Ail, Ujwala; Gueskine, Viktor; Phopase, Jaywant; Brooke, Robert; Gabrielsson, Roger; Jonsson, Magnus P.; Mak, Wing Cheung; Berggren, Magnus; Crispin, Xavier
  Advanced Sustainable Systems (2019), 3 (9), 1900039CODEN: ASSDAN; ISSN:2366-7486. (Wiley-VCH Verlag GmbH & Co. KGaA)
  Lignosulfonate (LS) is a large-scale surplus product of the forest and paper industries, and has primarily been utilized as a low-cost plasticizer in making concrete for the construction industry. LS is an anionic redox-active polyelectrolyte and is a promising candidate to boost the charge capacity of the pos. electrode (positrode) in redox-supercapacitors. Here, the phys.-chem. investigation of how this biopolymer incorporates into the conducting polymer PEDOT matrix, of the positrode, by means of counter-ion exchange is reported. Upon successful incorporation, an optimal access to redox moieties is achieved, which provides a 63% increase of the resulting stored elec. charge by reversible redox interconversion. The effects of pH, ionic strength, and concns., of included components, on the polymer-polymer interactions are optimized to exploit the biopolymer-assocd. redox currents. Further, the explored LS-conducting polymer incorporation strategy, via aq. synthesis, is evaluated in an up-scaling effort toward large-scale elec. energy storage technol. By using an up-scaled prodn. protocol, integration of the biopolymer within the conducting polymer matrix by counter-ion exchange is confirmed and the PEDOT-LS synthesized through optimized strategy reaches an improved charge capacity of 44.6 mAh g-1.
18. 18
  Edberg, J.; Inganas, O.; Engquist, I.; Berggren, M. Boosting the capacity of all-organic paper supercapacitors using wood derivatives. J. Mater. Chem. A 2018, 6, 145– 152, DOI: 10.1039/C7TA06810G
  18
  Boosting the capacity of all-organic paper supercapacitors using wood derivatives
  Edberg, Jesper; Inganaes, Olle; Engquist, Isak; Berggren, Magnus
  Journal of Materials Chemistry A: Materials for Energy and Sustainability (2018), 6 (1), 145-152CODEN: JMCAET; ISSN:2050-7496. (Royal Society of Chemistry)
  Printed and flexible org. electronics is a steadily expanding field of research and applications. One of the most attractive features of this technol. is the possibility of large area and high throughput prodn. to form low-cost electronics on different flexible substrates. With an increasing demand for sustainable energy prodn., low-cost and large vol. technologies to store high-quality energy become equally important. These devices should be environmentally friendly with respect to their entire life cycle. Supercapacitors and batteries based on paper hold great promise for such applications due to the low cost and abundance of cellulose and other forest-derived components. We report a thick-film paper-supercapacitor system based on cellulose nanofibrils, the mixed ion-electron conducting polymer PEDOT:PSS and sulfonated lignin. We demonstrate that the introduction of sulfonated lignin into the cellulose-conducting polymer system increases the specific capacitance from 110 to 230 F g-1 and the areal capacitance from 160 mF cm-2 to 1 F cm-2. By introducing lignosulfonate also into the electrolyte soln., equil., with respect to the concn. of the redox mol., was established between the electrode and the electrolyte, thus allowing us to perform beyond 700 charge/discharge cycles with no obsd. decrease in performance.
19. 19
  Larsson, O.; Said, E.; Berggren, M.; Crispin, X. Insulator Polarization Mechanisms in Polyelectrolyte-Gated Organic Field-Effect Transistors. Adv. Funct. Mater. 2009, 19, 3334– 3341, DOI: 10.1002/adfm.200900588
  19
  Insulator Polarization Mechanisms in Polyelectrolyte-Gated Organic Field-Effect Transistors
  Larsson, Oscar; Said, Elias; Berggren, Magnus; Crispin, Xavier
  Advanced Functional Materials (2009), 19 (20), 3334-3341CODEN: AFMDC6; ISSN:1616-301X. (Wiley-VCH Verlag GmbH & Co. KGaA)
  Electrolyte-gated org. field-effect transistors (OFETs) hold promise for robust printed electronics operating at low voltages. The polarization mechanism of thin solid electrolyte films, the gate insulator in such OFETs, is still unclear and appears to limit the transient current characteristics of the transistors. Here, the polarization response of a thin proton membrane, a poly(styrenesulfonic acid) film, is controlled by varying the relative humidity. The formation of the conducting transistor channel follows the polarization of the polyelectrolyte, such that the drain transient current characteristics vs. the time are rationalized by three different polarization mechanisms: the dipolar relaxation at high frequencies, the ionic relaxation (migration) at intermediate frequencies, and the elec. double-layer formation at the polyelectrolyte interfaces at low frequencies. The elec. double layers of polyelectrolyte capacitors are formed in ∼1 μs at humid conditions and an effective capacitance per area of 10 μF cm-2 is obtained at 1 MHz, thus suggesting that this class of OFETs might operate at up to 1 MHz at 1 V.
20. 20
  Wang, H.; Zhao, D.; Khan, Z. U.; Puzinas, S.; Jonsson, M. P.; Berggren, M.; Crispin, X. Ionic Thermoelectric Figure of Merit for Charging of Supercapacitors. Adv. Electron. Mater. 2017, 3, 1700013, DOI: 10.1002/aelm.201700013
  There is no corresponding record for this reference.
21. 21
  Jiao, F.; Edberg, J.; Zhao, D.; Puzinas, S.; Khan, Z. U.; Mäkie, P.; Naderi, A.; Lindström, T.; Odén, M.; Engquist, I.; Berggren, M.; Crispin, X. Nanofibrillated Cellulose-Based Electrolyte and Electrode for Paper-Based Supercapacitors. Adv. Sustainable Syst. 2018, 2, 1700121, DOI: 10.1002/adsu.201700121
  There is no corresponding record for this reference.
22. 22
  Kwon, N. H.; Mouck-Makanda, D.; Fromm, K. M. A Review: Carbon Additives in LiMnPO₄- and LiCoO₂-Based Cathode Composites for Lithium Ion Batteries. Batteries 2018, 4, 50, DOI: 10.3390/batteries4040050
  22
  A review: carbon additives in LiMnPO4- and LiCoO2-based cathode composites for lithium ion batteries
  Kwon, Nam Hee; Mouck-Makanda, Divine; Fromm, Katharina M.
  Batteries (Basel, Switzerland) (2018), 4 (4), 50CODEN: BATTAT; ISSN:2313-0105. (MDPI AG)
  A review. Carbon plays a crit. role in improving the electronic cond. of cathodes in lithium ion batteries. Particularly, the characteristics of carbon and its composite with electrode material strongly affect battery properties, governed by electron as well as Li+ ion transport. We have reviewed here various types of carbon materials and org. carbon sources in the prodn. of conductive composites of nano-LiMnPO4 and LiCoO2. Various processes of making these composites with carbon or org. carbon sources and their characterization have been reviewed. Finally, the type and amt. of carbon and the prepn. methods of composites are summarized along with their battery performances and cathode materials. Among the different processes of making a composite, ball milling provided the benefit of dense and homogeneous nanostructured composites, leading to higher tap-d. and thus increasing the volumetric energy densities of cathodes.
23. 23
  Chang, W. J.; Lee, G. H.; Cheon, Y. J.; Kim, J. T.; Lee, S. I.; Kim, J.; Kim, M.; Park, W. I.; Lee, Y. J. Direct Observation of Carboxymethyl Cellulose and Styrene–Butadiene Rubber Binder Distribution in Practical Graphite Anodes for Li-Ion Batteries. ACS Appl. Mater. Interfaces 2019, 11 (44), 41330– 41337, DOI: 10.1021/acsami.9b13803
  23
  Direct Observation of Carboxymethyl Cellulose and Styrene-Butadiene Rubber Binder Distribution in Practical Graphite Anodes for Li-Ion Batteries
  Chang, Won Jun; Lee, Gyu Hyeon; Cheon, Yeong Jun; Kim, Jin Tae; Lee, Sang Il; Kim, Jaehyuk; Kim, Myungseop; Park, Won Il; Lee, Yun Jung
  ACS Applied Materials & Interfaces (2019), 11 (44), 41330-41337CODEN: AAMICK; ISSN:1944-8244. (American Chemical Society)
  Despite the important role of CM-cellulose (CMC) and styrene-butadiene rubber (SBR) binders in graphite electrodes for Li-ion batteries, the direct anal. of these binders remains challenging, particularly at very low concns. as in practical graphite anodes. In this paper, the systematic investigation is reported of the physiochem. behavior of the CMC and SBR binders and direct observations of their distributions in practical graphite electrodes. The key to this unprecedented capability is combining the advantages of several analytic techniques, including laser-ablation laser-induced break-down spectroscopy, time of flight secondary ion mass spectrometry, and a surface and interfacial cutting anal. system. By correlating the vertical distribution with the adsorption behaviors of the CMC, the study reveals that the CMC migration toward the surface during the drying process depends on the degree of cross-linked binder-graphite network generation, which is detd. by the surface property of graphite and CMC materials. The suggested anal. techniques enable the independent tracing of CMC and SBR, disclosing the different vertical distribution of SBR from that of the CMC binder in our practical graphite anodes. This achievement provides addnl. opportunity to analyze the correlation between the binder distribution and mech. properties of the electrodes.
24. 24
  Li, Z.; Ge, Y. Extraction of lignin from sugar cane bagasse and its modification into a high performance dispersant for pesticide formulations. J. Braz. Chem. Soc. 2011, 22, 1866– 1871, DOI: 10.1590/S0103-50532011001000006
  24
  Extraction of lignin from sugar cane bagasse and its modification into a high performance dispersant for pesticide formulations
  Li, Zhili; Ge, Yuanyuan
  Journal of the Brazilian Chemical Society (2011), 22 (10), 1866-1871CODEN: JOCSET; ISSN:0103-5053. (Sociedade Brasileira de Quimica)
  In order to effectively utilize a byproduct of non-wood material, lignin was extd. from sugar cane bagasse via acidification of black liquor. The extd. sugar cane bagasse lignin (EBL) was modified by oxidn., hydroxymethylation, and sulfonation into a water-sol. lignosulfonate (EBL-M). It was characterized by IR, UV, GPC and elemental anal. The results showed that the arom. units of EBL-M were kept well and it was effectively sulfonated, that the percentage of S was high as 7.82%. The dispersing efficiency of EBL-M for pesticide formulations was compared with com. dispersants via suspending rate measurement. As expected, EBL-M had the equal optimal dispersing efficiency to kinsperse than other com. lignosulfonates when being used for dimethomorph water dispersible granules. The characterization of mol. wt. and sulfonic group's content of lignosulfonates suggested that the dispersing efficiency increased with higher sulfonic group's content and higher mol. wt. As to being used for tribenuron water dispersible granules, the dispersing efficiency of EBL-M was much close to the com. dispersants.
25. 25
  Heitner, C., Dimmel, D. R, Schmidt, J. A, Ed. Lignin and Lignans: Advances in Chemistry; CRC Press Taylor & Francis Group, 2010, DOI: 10.1201/EBK1574444865 .
  There is no corresponding record for this reference.
26. 26
  Fergus, B. J.; Goring, D. A. I. The Distribution of Lignin in Birch Wood as Determined by Ultraviolet Microscopy. Holzforschung 1970, 24, 118, DOI: 10.1515/hfsg.1970.24.4.118
  26
  Distribution of lignin in birchwood as determined by ultraviolet microscopy
  Fergus, Brian J.; Goring, David A. I.
  Holzforschung (1970), 24 (4), 118-24CODEN: HOLZAZ; ISSN:0018-3830.
  Uv spectroscopy was used to det. the patterns of lignification in birchwood xylem tissues. The lignin contents of the fibers and vessels of white birch were 0.19-0.22 g/g and 0.24-0.28 g/g, resp. The fibers contained 77% of the total lignin in the birch, and the fiber secondary wall contained 77% of the lignin in the fibers and 60% of the lignin in the total wood. The vessel and ray secondary walls contained >81% of the lignin in the xylem.
27. 27
  Ail, U.; Jafari, M. J.; Wang, H.; Ederth, T.; Berggren, M.; Crispin, X. Thermoelectric Properties of Polymeric Mixed Conductors. Adv. Funct. Mater. 2016, 26, 6288– 6296, DOI: 10.1002/adfm.201601106
  27
  Thermoelectric Properties of Polymeric Mixed Conductors
  Ail, Ujwala; Jafari, Mohammad Javad; Wang, Hui; Ederth, Thomas; Berggren, Magnus; Crispin, Xavier
  Advanced Functional Materials (2016), 26 (34), 6288-6296CODEN: AFMDC6; ISSN:1616-301X. (Wiley-VCH Verlag GmbH & Co. KGaA)
  The thermoelec. (TE) phenomena are intensively explored by the scientific community due to the rather inefficient way energy resources are used with a large fraction of energy wasted in the form of heat. Among various materials, mixed ion-electron conductors (MIEC) are recently being explored as potential thermoelecs., primarily due to their low thermal cond. The combination of electronic and ionic charge carriers in those inorg. or org. materials leads to complex evolution of the thermovoltage (Voc) with time, temp., and/or humidity. One of the most promising org. thermoelec. materials, poly(3,4-ethyelenedioxythiophene)-polystyrene sulfonate (PEDOT-PSS), is an MIEC. A previous study reveals that at high humidity, PEDOT-PSS undergoes an ionic Seebeck effect due to mobile protons. Yet, this phenomenon is not well understood. In this work, the time dependence of the Voc is studied and its behavior from the contribution of both charge carriers (holes and protons) is explained. The presence of a complex reorganization of the charge carriers promoting an internal electrochem. reaction within the polymer film is identified. Interestingly, it is demonstrated that the time dependence behavior of Voc is a way to distinguish between three classes of polymeric materials: electronic conductor, ionic conductor, and mixed ionic-electronic conductor.
28. 28
  Lai, W.; Haile, S. M. Impedance Spectroscopy as a Tool for Chemical and Electrochemical Analysis of Mixed Conductors: A Case Study of Ceria. J. Am. Ceram. Soc. 2005, 88, 2979– 2997, DOI: 10.1111/j.1551-2916.2005.00740.x
  28
  Impedance spectroscopy as a tool for chemical and electrochemical analysis of mixed conductors: A case study of ceria
  Lai, Wei; Haile, Sossina M.
  Journal of the American Ceramic Society (2005), 88 (11), 2979-2997CODEN: JACTAW; ISSN:0002-7820. (Blackwell Publishing, Inc.)
  The AC impedance response of mixed ionic and electronic conductors (MIECs) is derived from first principles and quant. compared with exptl. data. While the approach is not entirely new, the derivation is provided in a unified and comprehensive manner. Using Sm0.15Ce0.85O1.925-δ with Pt electrodes as a model system, a broad spectrum of elec. and thermodn. properties is extd. solely from the measurement of impedance spectra over wide oxygen partial pressure and temp. ranges. Here, the oxygen partial pressure was varied from air |pO2 = 0.21 atm| to H2 |pO2 = 10-31 atm|, and the temp. was varied from 500° to 650°C. It was essential for this anal. that the material under investigation exhibit, under some conditions, purely ionic behavior and, under others, mixed conducting behavior. The transition from ionic to mixed conducting behavior is recognizable not only from the oxygen partial pressure dependence of the total cond. but also directly from the shape of the impedance spectra. Within the electrolytic regime, the impedance spectra (presented in Nyquist form) take the shape of simple, depressed arcs, whereas within the mixed conducting regime (under reducing conditions), the spectra exhibit the features assocd. with a half tear-drop-shaped element. Parameters derived from quant. fitting of the impedance spectra include the concn. of free electron carriers, the mobilities and activation energies for both ion and electron transport, the electrolytic domain boundary, and the entropy and enthalpy of redn. In addn., the electrochem. behavior of O2 and H2 at the Pt|ceria interface has been characterized from these measurements. Under oxidizing conditions, the data suggest an oxygen electrochem. reaction that is rate limited by the dissocd. adsorption/diffusion of oxygen species on the Pt electrode, similar to Pt|YSZ (yttria-stabilized zirconia). Under reducing conditions, the inverse of the electrode resistivity obeys a p-1/4O2 dependence, with an activation energy that is similar to that measured for the electronic cond. These results suggest that ceria is electrochem. active for hydrogen electro-oxidn. and that the reaction is limited by the rate of removal of electrons from the ceria surface.
29. 29
  Hasan, M. H. M.; Ramli, H.; Ong, S. K.; Manroshan, S. Study on the effect of ball milling time towards the stability of carbon black dispersion and carbon black masterbatch properties. AIP Conference Proceedings 1985, 040014, 2018, DOI: DOI: 10.1063/1.5047191 .
  There is no corresponding record for this reference.
Supporting Information
Supporting Information
The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05397.
- Current (at 0 V) versus scan rate, current (at redox potential) versus √ scan rate for manually mixed DSLS/C, EDX elemental mapping of manually mixed and ball milled DSLS/C (PDF)
- sc0c05397_si_001.pdf (305.93 kb)
Terms & Conditions

Most electronic Supporting Information files are available without a subscription to ACS Web Editions. Such files may be downloaded by article for research use (if there is a public use license linked to the relevant article, that license may permit other uses). Permission may be obtained from ACS for other uses through requests via the RightsLink permission system: http://pubs.acs.org/page/copyright/permissions.html.

Effect of Sulfonation Level on Lignin/Carbon Composite Electrodes for Large-Scale Organic BatteriesClick to copy article linkArticle link copied!

ACS Sustainable Chemistry & Engineering

Abstract

Synopsis

Introduction

Figure 1

Experimental Section

Procedure for the Desulfonation of LS

Figure 2

DS-LS Material Characterization

Gel Permeation Chromatography (GPC)

Elementary Analysis

Preparation of DSLS/Carbon Composite Electrode

Electrochemical Characterization

Results

Characterization of Lignin with Various Sulfonation Levels

Figure 3

Choice of the Sulfonation Level for the Lignin/Carbon Composite

Figure 4

Processing Methods for the Fabrication DSLS-Carbon Electrodes

Figure 5

Figure 6

Optimization of the Ball Milled DSLS-Carbon Electrodes

Figure 7

Discussion

Figure 8

Conclusions

Supporting Information

Terms & Conditions

Author Information

Acknowledgments

References

Cited By

ACS Sustainable Chemistry & Engineering

Article Views

Altmetric

Citations

Recommended Articles

Abstract

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Figure 7

Figure 8

References

Supporting Information

Supporting Information

Terms & Conditions

Effect of Sulfonation Level on Lignin/Carbon Composite Electrodes for Large-Scale Organic Batteries
Click to copy article linkArticle link copied!