ACS Publications. Most Trusted. Most Cited. Most Read
My Activity
CONTENT TYPES

Figure 1Loading Img

Excess Molar Volumes and Surface Tensions of Xylene with Isopropyl Ether or Methyl tert-Butyl Ether at 298.15 K

View Author Information
School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275, China
Cite this: J. Chem. Eng. Data 2004, 49, 3, 732–734
Publication Date (Web):April 24, 2004
https://doi.org/10.1021/je034279l
Copyright © 2004 American Chemical Society

    Article Views

    205

    Altmetric

    -

    Citations

    LEARN ABOUT THESE METRICS
    Other access options
    Supporting Info (1)»

    Abstract

    Densities for binary mixtures of isopropyl ether + o-xylene, + m-xylene, and + p-xylene have been determined at 298.15 K, and excess molar volumes have been derived. Surface tensions for binary mixtures of (isopropyl ether + o-xylene, + m-xylene, and + p-xylene and methyl tert-butyl ether + o-xylene, + m-xylene, and + p-xylene) have been measured at 298.15 K by the pendant-drop method, and the values of the surface tension deviation for these mixtures were also calculated.

    Read this article

    To access this article, please review the available access options below.

    Get instant access

    Purchase Access

    Read this article for 48 hours. Check out below using your ACS ID or as a guest.

    Recommended

    Access through Your Institution

    You may have access to this article through your institution.

    Your institution does not have access to this content. You can change your affiliated institution below.

    *

     To whom correspondence may be addressed. E-mail:  cesoygf@ zsu.edu.cn.

    Supporting Information Available

    ARTICLE SECTIONS
    Jump To

    Density data of xylene with isopropyl ether at 298.15 K. This material is available free of charge via the Internet at http://pubs.acs.org.

    Terms & Conditions

    Most electronic Supporting Information files are available without a subscription to ACS Web Editions. Such files may be downloaded by article for research use (if there is a public use license linked to the relevant article, that license may permit other uses). Permission may be obtained from ACS for other uses through requests via the RightsLink permission system: http://pubs.acs.org/page/copyright/permissions.html.

    Cited By

    This article is cited by 27 publications.

    1. Ana Gayol, Lidia M. Casás, Alfonsina E. Andreatta, Raquel E. Martini, and José L. Legido . Surface Tension of Dialkyl Carbonates + (Alkanes or 1,4-Dimethylbenzene) and 1,4-Dimethylbenzene + Alkanes Binary Mixtures at T = 308.15 K. Journal of Chemical & Engineering Data 2013, 58 (3) , 758-763. https://doi.org/10.1021/je301282p
    2. Shengshan Bi, Guanjia Zhao and Jiangtao Wu. Surface Tension of Diethyl Ether, Diisopropyl Ether, and Dibutyl Ether. Journal of Chemical & Engineering Data 2010, 55 (4) , 1523-1526. https://doi.org/10.1021/je900665a
    3. Xianyang Meng, Jiangtao Wu and Zhigang Liu. Viscosity and Density Measurements of Diisopropyl Ether and Dibutyl Ether at Different Temperatures and Pressures. Journal of Chemical & Engineering Data 2009, 54 (9) , 2353-2358. https://doi.org/10.1021/je8005369
    4. Anil K. Nain, Prakash Chandra, Jata D. Pandey and Swarita Gopal . Densities, Refractive Indices, and Excess Properties of Binary Mixtures of 1,4-Dioxane with Benzene, Toluene, o-Xylene, m-Xylene, p-Xylene, and Mesitylene at Temperatures from (288.15 to 318.15) K. Journal of Chemical & Engineering Data 2008, 53 (11) , 2654-2665. https://doi.org/10.1021/je800579j
    5. Alena Randová, Ondřej Vopička, Lidmila Bartovská, Karel Friess. Cyclopentyl methyl ether, tert-amyl methyl ether and tert-butyl methyl ether: density, dynamic viscosity, surface tension and refractive index. Chemical Papers 2018, 72 (4) , 947-954. https://doi.org/10.1007/s11696-017-0338-x
    6. Elmira Fanaei Khosroshahi, Amir Heydari, Behruz Mirzayi, Amir Nasser Shamkhali. A model to calculate concentration-dependent surface tension of binary systems. Fluid Phase Equilibria 2016, 423 , 34-42. https://doi.org/10.1016/j.fluid.2016.04.007
    7. Sheng Wang, Ying Zhang, Maogang He, Shi Zhang, Xiong Zheng. Thermal diffusivity of di-isopropyl ether (DIPE) in the temperature range 298–530K and pressure up to 10MPa from dynamic light scattering (DLS). Fluid Phase Equilibria 2014, 376 , 202-209. https://doi.org/10.1016/j.fluid.2014.05.042
    8. Ali Akbar Amooey. A Novel Model for Predicting the Surface Tension of Binary Solutions. Journal of Engineering Physics and Thermophysics 2014, 87 (3) , 533-540. https://doi.org/10.1007/s10891-014-1042-0
    9. Ensieh Ghasemian. Prediction of surface tension and surface properties of organic binary mixtures. Journal of Molecular Liquids 2013, 183 , 64-71. https://doi.org/10.1016/j.molliq.2013.04.006
    10. D. Montaño, B. Giner, S. Martín, Carlos Lafuente. Surface study of binary mixtures containing chlorinated and oxygenated compounds. Journal of Molecular Liquids 2013, 181 , 1-7. https://doi.org/10.1016/j.molliq.2013.01.024
    11. Diego Montaño, Isabel Bandrés, Luz M. Ballesteros, Carlos Lafuente, Félix M. Royo. Study of the Surface Tensions of Binary Mixtures of Isomeric Chlorobutanes with Methyl tert-Butyl Ether. Journal of Solution Chemistry 2011, 40 (7) , 1173-1186. https://doi.org/10.1007/s10953-011-9717-z
    12. Anil Kumar Nain, Rajni Sharma, Anwar Ali, Swarita Gopal. Densities and Volumetric Properties of Binary Mixtures of Butyl Acrylate with Benzene, Toluene, o-Xylene, m-Xylene, p-Xylene, and Mesitylene at Temperatures from 288.15 K to 318.15 K. International Journal of Thermophysics 2010, 31 (6) , 1073-1091. https://doi.org/10.1007/s10765-010-0768-y
    13. Anil Kumar Nain, Rajni Sharma, Anwar Ali, Swarita Gopal. Densities and volumetric properties of methyl acrylate+benzene, or toluene, or o-xylene, or m-xylene, or p-xylene, or mesitylene binary mixtures at temperatures from 293.15 to 318.15 K. Journal of Molecular Liquids 2009, 144 (3) , 124-130. https://doi.org/10.1016/j.molliq.2008.09.008
    14. Ch. Wohlfarth. Surface tension of 2-methoxy-2-methylpropane. 2008, 152-153. https://doi.org/10.1007/978-3-540-75508-1_104
    15. Ch. Wohlfarth. Surface tension of diisopropyl ether. 2008, 183-183. https://doi.org/10.1007/978-3-540-75508-1_131
    16. Ch. Wohlfarth. Surface tension of 1,2-dimethylbenzene. 2008, 210-211. https://doi.org/10.1007/978-3-540-75508-1_154
    17. Ch. Wohlfarth. Surface tension of 1,3-dimethylbenzene. 2008, 212-213. https://doi.org/10.1007/978-3-540-75508-1_155
    18. Ch. Wohlfarth. Surface tension of 1,4-dimethylbenzene. 2008, 214-215. https://doi.org/10.1007/978-3-540-75508-1_156
    19. Ch. Wohlfarth. Surface tension of the mixture (1) 2-methoxy-2-methylpropane; (2) 1,2-dimethylbenzene. 2008, 670-670. https://doi.org/10.1007/978-3-540-75508-1_447
    20. Ch. Wohlfarth. Surface tension of the mixture (1) 2-methoxy-2-methylpropane; (2) 1,3-dimethylbenzene. 2008, 671-671. https://doi.org/10.1007/978-3-540-75508-1_448
    21. Ch. Wohlfarth. Surface tension of the mixture (1) 2-methoxy-2-methylpropane; (2) 1,4-dimethylbenzene. 2008, 672-672. https://doi.org/10.1007/978-3-540-75508-1_449
    22. Ch. Wohlfarth. Surface tension of the mixture (1) diisopropyl ether; (2) 1,2-dimethylbenzene. 2008, 703-703. https://doi.org/10.1007/978-3-540-75508-1_470
    23. Ch. Wohlfarth. Surface tension of the mixture (1) diisopropyl ether; (2) 1,3-dimethylbenzene. 2008, 704-704. https://doi.org/10.1007/978-3-540-75508-1_471
    24. Ch. Wohlfarth. Surface tension of the mixture (1) diisopropyl ether; (2) 1,4-dimethylbenzene. 2008, 705-705. https://doi.org/10.1007/978-3-540-75508-1_472
    25. Yang-Yi Yang, Jian-Hong Deng, Hai-Ling Yang, Xiu-Huan Zheng, Guan-Quan Che, Zhong-Qi Huang. Densities, surface tensions, and derived surface thermodynamics properties of (trimethylbenzene+propyl acetate, or butyl acetate) from T=298.15K to 313.15K. The Journal of Chemical Thermodynamics 2007, 39 (3) , 438-448. https://doi.org/10.1016/j.jct.2006.07.025
    26. Anil Kumar Nain. Densities and Volumetric Properties of Binary Mixtures of Tetrahydrofuran with Some Aromatic Hydrocarbons at Temperatures from 278.15 to 318.15 K. Journal of Solution Chemistry 2006, 35 (10) , 1417-1439. https://doi.org/10.1007/s10953-006-9071-8
    27. Reza Tahery, Hamid Modarress, John Satherley. Surface tension prediction and thermodynamic analysis of the surface for binary solutions. Chemical Engineering Science 2005, 60 (17) , 4935-4952. https://doi.org/10.1016/j.ces.2005.03.056

    Pair your accounts.

    Export articles to Mendeley

    Get article recommendations from ACS based on references in your Mendeley library.

    Pair your accounts.

    Export articles to Mendeley

    Get article recommendations from ACS based on references in your Mendeley library.

    You’ve supercharged your research process with ACS and Mendeley!

    STEP 1:
    Click to create an ACS ID

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    MENDELEY PAIRING EXPIRED
    Your Mendeley pairing has expired. Please reconnect