Aperiodic Copolymers
Abstract

Current polymer terminology only describes very simple copolymer structures such as block, graft, alternating periodic, or statistical copolymers. This restricted vocabulary implies that copolymers exhibit either segregated (i.e., block and graft), regular (i.e., alternating and periodic), or uncontrolled (i.e., statistical or random) comonomer sequence distributions. This standard classification does not include many new types of sequence-controlled copolymers that have been reported in recent years. In this context, the present viewpoint describes a new category of copolymers: aperiodic copolymers. Such structures can be defined as copolymers in which monomer sequence distribution is not regular but follows the same arrangement in all chains. The term aperiodic can be used to describe encoded comonomer sequences in monodisperse sequence-defined copolymers but also the block sequence of some multiblock copolymers. These new types of copolymers open up very interesting perspectives for the design of complex materials. Some recent relevant literature on the topic is discussed herein.
In 1945, Erwin Schrödinger introduced in his famous book “What is Life” the idea of an aperiodic crystal to describe genetic material. (1) This was a remarkably visionary description, given the knowledge that was available at that time about the structure of macromolecules. Inspired by the book of Schrödinger, Watson and Crick confirmed a few years later that genetic information is encoded in the aperiodic sequences of DNA chains. (2, 3) Since then, it is universally admitted that the diversity and complexity of biology is linked to the comonomer sequences of biopolymers. There would be no genetic code, no evolution, and no living matter if DNA chains would be simple periodic structures.
In sharp contrast to the field of molecular biology, the notion of aperiodicity is almost fully ignored in synthetic polymer chemistry. Manmade copolymers that have been discovered and studied during the last 80 years are, in general, very simple structures. This situation is directly reflected by the terminology that can be found in standard polymer textbooks. For instance, the IUPAC official nomenclature for copolymers includes the following subclasses: block, graft, alternating periodic, random, and statistical (Figure 1). (4, 5) Block and graft copolymers are macromolecules composed of segments of different chemical nature (i.e., segmented copolymers). The terms alternating and periodic describe copolymers with regular sequences of comonomers such as (AB)n, (AAB)n, or (ABC)n. All other situations fall somehow in the broad category of statistical/random copolymers. This is a very incomplete description of what polymer chemistry can currently achieve. Some terms and categories are clearly missing here. Indeed, with the recent development of sequence-controlled polymerization methods, a wide variety of new copolymer structures, which do not belong in the aforementioned categories, have been synthesized and reported. (6-8) Of course, some sequence-controlled polymers exhibit regular primary structures. As discussed in a recent review, (6) alternating and periodic copolymers belong to the broad category of sequence-controlled macromolecules. However, many other sequence-controlled polymers do not exhibit periodic sequences, and such structures are probably the most interesting ones. (10) Such aperiodic macromolecules are copolymers, in which comonomer sequences are intentionally distributed in a nonperiodic arrangement. However, the word “intentionally” is probably not fully appropriate to describe these structures because some natural aperiodic copolymers (e.g., DNA) were not created intentionally. A better definition is probably the following:
Figure 1

Figure 1. (a) Proposed definition for sequence-controlled and sequence-defined copolymers. (9) (b) Some official (blue), nonofficial (gray), and nonexisting (red) terms to denote synthetic copolymers. Note that the color code is only valid for (b). The colors displayed in (a) are used for aesthetic reasons only.
Figure 2

Figure 2. Schematic representation of different types of aperiodic copolymers: multiblock copolymers (left), multisite copolymers obtained using time-controlled monomer additions (middle), and monodisperse sequence-defined copolymers (right). The ellipse points displayed at the extremities only mean that the sequences can be longer than shown.
Aperiodic copolymers are copolymers in which monomer sequence distribution is not regular but follows the same arrangement in all chains.
In this definition, the words “in all chains” are probably the most important ones. This is what makes the difference between an aperiodic copolymer and a random copolymer. (11) In an aperiodic copolymer, the same monomer arrangement should be found in all chains, whereas in random copolymers, chain-to-chain deviations may exist. Aperiodicity is not randomness. Aperiodicity is not statistical either, because the word statistical is restrictive and denotes copolymers prepared by a copolymerization process following statistical laws (e.g., a chain-growth process). Of course, the above definition can be loosely interpreted. Similarly to alternating or periodic copolymers, some sequence defects and light chain-to-chain sequence deviations can be tolerated (e.g., a copolymer containing 90% of alternating dyads is generally still considered to be an alternating copolymer). Thus, different types of copolymers can be described as aperiodic (Figure 2). It should be noted that the term aperiodic copolymer has already been employed in a few publications. (12-15) However, previous uses of this term are not always matching the above definition.
The simplest example of an aperiodic copolymer is probably a multiblock copolymer, in which the block sequence does not follow a regular pattern (Figure 2, left). It should be reminded that block copolymers have been studied for decades and have therefore their own terminology. For instance, the terms symmetric/asymmetric are often used to denote them. These words, however, do not mean the same thing as periodic/aperiodic. Indeed, the symmetry of a block copolymer depends on block sequence and block length (i.e., on the volume fraction of each block). (16-19) For instance, multiblock copolymers composed of repeated AB motifs can be symmetric or asymmetric. The terms periodic and aperiodic allow a simplified description of a linear multiblock sequence. In this case, each block is considered as a unit in the sequence, independently of its length. (20) For instance a multiblock ABCABCABC can be described as periodic, i.e., (ABC)3. On the other hand, the block copolymer ABABCBCAC can be named aperiodic. In a recent review, Bates et al. have highlighted the interesting opportunities that could be explored with complex multiblock copolymers. (21) However, such structures were for a long time not available because it was difficult to synthesize block copolymers longer than pentablocks using stepwise strategies. Thus, early examples of decablock, undecablock, or dodecablock copolymers reported in the literature were in general periodic structures. (22-25) This situation has changed during the past few years with the development of optimal living polymerization techniques for block synthesis. The first example was reported by Coates and co-workers who described the synthesis of aperiodic functional hexablock copolymers. (26) Following that example, Whittaker and co-workers have described the synthesis of aperiodic hexablock and octablock copolymers by single-electron transfer living radical polymerization (SET-LRP). (27, 28) More recently, Perrier and co-workers have reported comparable results using reversible addition–fragmentation chain transfer (RAFT) polymerization. (29) Although the chain-end fidelity of SET-LRP and RAFT has been recently questioned, (30, 31) these examples show that long aperiodic block sequences are now reachable. In this new context, a specific terminology for block sequences would be probably helpful. For example, recently reported icosablock copolymers are difficult to describe using standard naming conventions. (29)
Another type of aperiodic copolymer is a macromolecule containing discrete functional sites distributed aperiodically along its linear backbone (Figure 2, middle). In such a case, the backbone is predominantly composed of one type of comonomer (i.e., monomer A in the example). Functional sites composed of one or a few monomer units are positioned at specific locations along this backbone (e.g., comonomers B and C in the example of Figure 2). The terms periodic and aperiodic can be used to describe the distribution of these sites along the backbone. However, only the periodicity/aperiodicity of sites B and C is considered (i.e., A is not taken into account). For example, a copolymer containing a repeating site B or alternating sites B and C can be described as periodic. (32) On the other hand the structure displayed in the middle of Figure 2 can be named aperiodic. Such multisite copolymers can be obtained by applying external alterations during living polymerizations. (33) For instance using time-controlled monomer feeds, a statistical copolymerization process can be intentionally guided to form complex aperiodic sequences. (34) The first example of this was reported by our group some years ago. (35, 36) In this approach, small amounts of functional N-substituted maleimides are added at specific times during the atom transfer radical polymerization (ATRP) of a large excess of styrene. Due to the strong alternating tendency of these monomers with styrene, small functional regions are created at desired locations in the polystyrene backbone. Using a robotic platform, we have recently shown that complex aperiodic codes can be encrypted in the chains. (37) Still, this method utilizes a chain-growth polymerization process, and therefore the formed copolymers exhibit sequence defects as summarized in a recent account. (38) Nevertheless, we have recently described a concept for minimizing these defects and obtaining ultraprecise sequences. (39) Very recently, O’Reilly and co-workers have also reported a related strategy that exploits reactivity differences in ring-opening metathesis polymerization. (40) This approach was used to prepare aperiodic microstructures.
As shown on the right side of Figure 2, the next level of complexity is the synthesis of monodisperse sequence-defined copolymers containing aperiodic sequences. Although it is not an official terminology, it was recently proposed that the terms “sequence-controlled” and “sequence-defined” have different meanings (Figure 1a). (9) “Sequence-controlled” is a broad generic term that includes all type of polymers with controlled sequence distributions, (6) whereas “sequence-defined” refers to copolymers that have perfectly defined primary structures (ribosome-made proteins or resin-made oligomers for example). For instance, alternating copolymers prepared by free-radical polymerization are sequence-controlled but are not sequence-defined. On the other hand, sequence-defined copolymers are a particular subclass of sequence-controlled copolymers as shown in Figure 1a. The most reliable approach for preparing sequence-defined copolymers is iterative solid-phase chemistry, even though interesting alternative concepts have been reported lately. (41-43) During the last two decades, solid-phase chemistry has been used to prepare non-natural sequence-defined oligomers. (44, 45) For instance, peptoids, developed by Zuckermann and co-workers, can be prepared using a wide variety of functional submonomers and in the absence of main-chain protecting groups. (46) This interesting chemistry has been studied to build aperiodic polymer structures and related materials. (47) During the last years, other interesting protecting-group-free solid-phase approaches have been reported. (48-50) For example, our group has described a chemoselective approach using successive copper-catalyzed azide–alkyne cycloaddition (CuAAC) and amidification steps. (48) It was recently shown that this strategy can be used to prepare information-containing macromolecules. (51) Using three monomers (one spacer and two coding units), it was possible to implement intentionally a binary code in the formed oligomer chains. Although created with a restricted set of monomers, these copolymers are not alternating, not periodic, not gradient, not block, and certainly not random. They are the first example of synthetic macromolecules containing a binary code encoded by aperiodic comonomer sequences. As discussed in a recent essay, (10) such macromolecules are promising for encoding information at the molecular level.
In conclusion, the aim of the present viewpoint was to describe a new class of copolymers. Aperiodic copolymers are sequence-controlled copolymers that are not composed of repeating sequence motifs. As shown herein, numerous examples of aperiodic copolymers have been reported in recent literature. In this context, it is certainly time to revise the terminology of copolymers. Polymer chemists are now creating highly complex copolymer structures, which are not depicted in textbooks and official glossaries. For instance, classical microstructures such as gradient copolymers (Figure 1b), (52) which have been extensively studied for about 15 years, are still not included in the official nomenclature of polymers. (5) It would be probably very beneficial for our community if the debate on copolymer terminology could be reopened. Besides pure terminology considerations, it should be clearly stated that new types of copolymer such as aperiodic copolymers may open a world of new opportunities for conceiving polymer materials. Indeed, only aperiodicity allows creation of complex symphonies and languages.
Acknowledgment
This work was supported by the European Research Council (ERC Grant agreement 258593) and the CNRS. JFL thanks the University of Strasbourg, the Excellence Center for Complex Chemical Systems (LabEx CSC), and the International Center for Frontier Research in Chemistry (icFRC) for their support. Ron Zuckermann (Lawrence Berkeley National Laboratory) is also greatly acknowledged for his helpful comments and suggestions.
References
This article references 52 other publications.
- 1Schrödinger, E. What is Life?; The McMillan Company: New York, 1945.Google ScholarThere is no corresponding record for this reference.
- 2Watson, J. D.; Crick, F. H. C. Nature 1953, 171, 737[Crossref], [PubMed], [CAS], Google Scholar2https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaG2cXivVGktA%253D%253D&md5=66b78cf4b12c8c5ced56ff75a9468f35Molecular structure of nucleic acids. A structure for deoxyribose nucleic acidWatson, J. D.; Crick, F. H. C.Nature (London, United Kingdom) (1953), 171 (), 737-8CODEN: NATUAS; ISSN:0028-0836.W. and C. propose a new structure for the Na salt of deoxyribose nucleic acid. This structure, which loosely resembles Furberg's model No. 1 (C.A. 47, 9924g), has 2 helical polynucleotide chains each coiled around the same axis but whose sequence of atoms runs in opposite directions. The chains are held together by H-bonding between purine and pyrimidine bases, a purine of 1 chain bonded to a pyrimidine of the other. Full details will be published elsewhere.
- 3Peng, C. K.; Buldyrev, S. V.; Goldberger, A. L.; Havlin, S.; Sciortino, F.; Simons, M.; Stanley, H. E. Nature 1992, 356, 168
It should be noted that long-range correlations have been observed in nucleotide sequences. Although this topic is out of the scope of this viewpoint, additional information can be found in the following article:
- 4Ring, W.; Mita, I.; Jenkins, A. D.; Bikales, N. M. Pure Appl. Chem. 1985, 57, 1427[Crossref], [CAS], Google Scholar4https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaL2MXmtFGrsL8%253D&md5=f73e02e6f0952da7e959a6daa73006d8Source-based nomenclature for copolymersRing, W.; Mita, I.; Jenkins, A. D.; Bikales, N. M.Pure and Applied Chemistry (1985), 57 (10), 1427-40CODEN: PACHAS; ISSN:0033-4545.A systematic source-based nomenclature system for copolymers was proposed. The nomenclature system identified the constituent monomers and provided a description of the sequence arrangement of the different types (such as unspecified, statistical, random, alternating, periodic, block, and graft) of monomeric units present.
- 5Compendium of Polymer Terminology and Nomenclature, IUPAC Recommendations 2008, 2nd ed.; Jones, R. G.; Wilks, E. S.; Metanomski, W. V.; Kahovec, J.; Hess, M.; Stepto, R.; Kitayama, T., Eds.; RSC: U.K., 2009.
- 6Lutz, J.-F.; Ouchi, M.; Liu, D. R.; Sawamoto, M. Science 2013, 341, 1238149[Crossref], [PubMed], [CAS], Google Scholar6https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A280%3ADC%252BC3sfot1Crtg%253D%253D&md5=8f1340d51b6d30b0ce7afd68d97d39bfSequence-controlled polymersLutz Jean-Francois; Ouchi Makoto; Liu David R; Sawamoto MitsuoScience (New York, N.Y.) (2013), 341 (6146), 1238149 ISSN:.Sequence-controlled polymers are macromolecules in which monomer units of different chemical nature are arranged in an ordered fashion. The most prominent examples are biological and have been studied and used primarily by molecular biologists and biochemists. However, recent progress in protein- and DNA-based nanotechnologies has shown the relevance of sequence-controlled polymers to nonbiological applications, including data storage, nanoelectronics, and catalysis. In addition, synthetic polymer chemistry has provided interesting routes for preparing nonnatural sequence-controlled polymers. Although these synthetic macromolecules do not yet compare in functional scope with their natural counterparts, they open up opportunities for controlling the structure, self-assembly, and macroscopic properties of polymer materials.
- 7Badi, N.; Lutz, J.-F. Chem. Soc. Rev. 2009, 38, 3383
- 8Lutz, J.-F. Polym. Chem. 2010, 1, 55[Crossref], [CAS], Google Scholar8https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3cXlt1eksro%253D&md5=52a03493d19ab8832da61ad70929fac7Sequence-controlled polymerizations: the next Holy Grail in polymer science?Lutz, Jean-FrancoisPolymer Chemistry (2010), 1 (1), 55-62CODEN: PCOHC2; ISSN:1759-9962. (Royal Society of Chemistry)A review. The aim of this short perspective article is to sensitize polymer chemists to the importance of controlling comonomer sequences. During the last twenty years, our scientific community has made impressive progress in controlling the architecture of synthetic macromols. (i.e. chain length, shape and compn.). In comparison, our tools for controlling polymer microstructures (i.e. sequences and tacticity) are still very rudimentary. However, as learned from Nature, sequence-controlled polymers are most likely the key toward functional sub-nanometric materials.
- 9Sequence-Controlled Polymers: Synthesis, Self-Assembly, and Properties; ACS Symposium Series; Lutz, J.-F.; Meyer, T.; Ouchi, M.; Sawamoto, M., Eds.; ACS: Washington DC, 2014, Vol. 1170.
- 10Colquhoun, H.; Lutz, J.-F. Nat. Chem. 2014, 6, 455[Crossref], [PubMed], [CAS], Google Scholar10https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXot1ylt7g%253D&md5=3796bcfa9179656c4f91a798809dcb49Information-containing macromoleculesColquhoun, Howard; Lutz, Jean-FrancoisNature Chemistry (2014), 6 (6), 455-456CODEN: NCAHBB; ISSN:1755-4330. (Nature Publishing Group)Howard Colquhoun and Jean-Francois Lutz consider the potential of synthetic polymers for storing information at the mol. level.
- 11
The IUPAC Gold book includes the definition of an irregular macromolecule. The words irregular and aperiodic have related meanings. However, the current definition of an irregular macromolecule is broad and includes uncontrolled situations (e.g., random copolymers). There is also no official definition for an irregular copolymer.
There is no corresponding record for this reference. - 12Blackwell, J.; Gutierrez, G. A.; Chivers, R. A. Macromolecules 1984, 17, 1219
- 13Stupp, S. I.; Moore, J. S.; Martin, P. G. Macromolecules 1988, 21, 1228
- 14Stupp, S. I.; Wu, J. L.; Moore, J. S.; Martin, P. G. Macromolecules 1991, 24, 6399
- 15Bakhshi, A. K.; Pooja J. Chem. Soc., Faraday Trans. 1996, 92, 5017
- 16Leibler, L. Macromolecules 1980, 13, 1602[ACS Full Text
], [CAS], Google Scholar
16https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaL3cXmt1WitL0%253D&md5=8e7d668b6beac4bf27d558df34b7f1ebTheory of microphase separation in block copolymersLeibler, LudwikMacromolecules (1980), 13 (6), 1602-17CODEN: MAMOBX; ISSN:0024-9297.A microscopic, statistical theory of phase equil. in noncryst. AB block polymers is presented. The product of the Flory interaction parameter (χ) and d.p., and the fractional compn. of the chain, are the only relevant parameters. Under certain crit. conditions, formation of an unstable mode in the polymer melt precedes the microphase sepn. transition. After this transition, a mesophase with the symmetry of a bcc. lattice, expected to be a metastable phase over a wide range of compns., should appear. The regions of stability are calcd. and the phase diagram of the system is given. A new method for measuring χ is proposed. - 17Bates, F. S. Science 1991, 251, 898
- 18Matsen, M. W.; Bates, F. S. Macromolecules 1996, 29, 1091
- 19Ruzette, A.-V.; Leibler, L. Nat. Mater. 2005, 4, 19
- 20
It should be reminded to nonspecialist readers that the letters ABC are generally used to denote a single block in a block copolymer; i.e., the letter A denotes a series of similar monomers -AAAAAAAA-. For instance, the multiblock copolymer shown on the left of Figure 2 would be named ABACB. This should not be confused with the ABC code that is employed to describe random, alternating, and periodic copolymers. In such copolymers, each capital letter denotes a single monomer unit.
There is no corresponding record for this reference. - 21Bates, F. S.; Hillmyer, M. A.; Lodge, T. P.; Bates, C. M.; Delaney, K. T.; Fredrickson, G. H. Science 2012, 336, 434[Crossref], [PubMed], [CAS], Google Scholar21https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC38XlvFGqtrY%253D&md5=baab5bb4f82bce93a82db172882a711bMultiblock Polymers: Panacea or Pandora's Box?Bates, Frank S.; Hillmyer, Marc A.; Lodge, Timothy P.; Bates, Christopher M.; Delaney, Kris T.; Fredrickson, Glenn H.Science (Washington, DC, United States) (2012), 336 (6080), 434-440CODEN: SCIEAS; ISSN:0036-8075. (American Association for the Advancement of Science)A review. Advances in synthetic polymer chem. have unleashed seemingly unlimited strategies for producing block polymers with arbitrary nos. (n) and types (k) of unique sequences of repeating units. Increasing (k,n) leads to a geometric expansion of possible mol. architectures, beyond conventional ABA-type triblock copolymers (k = 2, n = 3), offering alluring opportunities to generate exquisitely tailored materials with unparalleled control over nanoscale-domain geometry, packing symmetry, and chem. compn. Transforming this potential into targeted structures endowed with useful properties hinges on imaginative mol. designs guided by predictive theory and computer simulation. Here, we review recent developments in the field of block polymers.
- 22Koo, C. M.; Hillmyer, M. A.; Bates, F. S. Macromolecules 2005, 39, 667
- 23Nagata, Y.; Masuda, J.; Noro, A.; Cho, D.; Takano, A.; Matsushita, Y. Macromolecules 2005, 38, 10220
- 24Wu, L.; Lodge, T. P.; Bates, F. S. Macromolecules 2005, 39, 294
- 25Sugiyama, K.; Oie, T.; El-Magd, A. A.; Hirao, A. Macromolecules 2010, 43, 1403
- 26Kim, J. G.; Cowman, C. D.; LaPointe, A. M.; Wiesner, U.; Coates, G. W. Macromolecules 2011, 44, 1110[ACS Full Text
], [CAS], Google Scholar
26https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXhsVertrs%253D&md5=44a7a4707c70f8fda4006340920c6c58Tailored Living Block Copolymerization: Multiblock Poly(cyclohexene carbonate)s with Sequence ControlKim, Jeung Gon; Cowman, Christina D.; LaPointe, Anne M.; Wiesner, Ulrich; Coates, Geoffrey W.Macromolecules (Washington, DC, United States) (2011), 44 (5), 1110-1113CODEN: MAMOBX; ISSN:0024-9297. (American Chemical Society)The living block copolymn. of functionalized cyclohexene oxides and CO2 is described, yielding multiblock poly(cyclohexene carbonate)s [p(CHC)s] with a diverse range of functionality on the side chains and good control of block sequence and length. Unlike prior systems that contain stable vinyl backbones, the carbonate backbones of polymers reported herein are degradable, allowing possible applications where removable templates are required. - 27Soeriyadi, A. H.; Boyer, C.; Nyström, F.; Zetterlund, P. B.; Whittaker, M. R. J. Am. Chem. Soc. 2011, 133, 11128[ACS Full Text
], [CAS], Google Scholar
27https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXotlaisL4%253D&md5=4c5d4a472591c936b7930c307e6b7c81High-Order Multiblock Copolymers via Iterative Cu(0)-Mediated Radical Polymerizations (SET-LRP): Toward Biological PrecisionSoeriyadi, Alexander H.; Boyer, Cyrille; Nystrom, Fredrik; Zetterlund, Per B.; Whittaker, Michael R.Journal of the American Chemical Society (2011), 133 (29), 11128-11131CODEN: JACSAT; ISSN:0002-7863. (American Chemical Society)We report a new approach for the facile synthesis of high-order multiblock copolymers comprising very short blocks. The approach entails sequential addn. of different monomers via an iterative single electron transfer-living radical polymn. technique, allowing nearly perfect control of the copolymer microstructure. It is possible to synthesize high-order multiblock copolymers with unprecedented control, i.e., A-B-C-D-E-etc., without any need for purifn. between iterative 24 h block formation steps. To illustrate this concept, we report the synthesis of model P(MA-b-MA...) homopolymer and P(MA-b-nBuA-b-EA-b-2EHA-b-EA-b-nBuA) copolymer in extremely high yield. Finally, the halide end-group can be modified via "click chem.", including thiol-bromide click chem., sodium methanethiosulfonate nucleophilic substitution, and atom transfer radical nitroxide coupling reaction, to yield functional, structurally complex macromols. - 28Boyer, C.; Soeriyadi, A. H.; Zetterlund, P. B.; Whittaker, M. R. Macromolecules 2011, 44, 8028[ACS Full Text
], [CAS], Google Scholar
28https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXhtFyksrjI&md5=56d6cd0ec1c54d2016fcb87a398d0352Synthesis of Complex Multiblock Copolymers via a Simple Iterative Cu(0)-Mediated Radical Polymerization ApproachBoyer, Cyrille; Soeriyadi, Alexander H.; Zetterlund, Per B.; Whittaker, Michael R.Macromolecules (Washington, DC, United States) (2011), 44 (20), 8028-8033CODEN: MAMOBX; ISSN:0024-9297. (American Chemical Society)Controlled/living radical polymn. is an efficient technique for the synthesis of well-defined polymeric architectures, including copolymers, block copolymers, stars, graft, and variations thereof. In this article, the authors report for the first time the synthesis of a decablock copolymer via a simple and efficient iterative Cu(0)-mediated radical polymn. technique. In this approach, purifn. is not required between the iterative chain extension steps, as each block formation is taken to full conversion. The final decablock copolymer can be obtained with a yield in mass of ∼90%. Using traditional controlled/living radical polymn. techniques, including reversible addn.-fragmentation chain transfer (RAFT) polymn., nitroxide-mediated polymn. (NMP), or atom transfer radical polymn. (ATRP), synthesis of decablock copolymer in such high yield is very difficult (and may be impossible) and requires numerous purifn. steps. The synthesis of the final complex copolymers required the concomitant synthesis of 16 architecturally discrete block copolymers. - 29Gody, G.; Maschmeyer, T.; Zetterlund, P. B.; Perrier, S. Nat. Commun. 2013, 4Google ScholarThere is no corresponding record for this reference.
- 30Harrisson, S.; Nicolas, J. ACS Macro Lett. 2014, 3, 643[ACS Full Text
], [CAS], Google Scholar
30https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXpslynsrk%253D&md5=27522de7ce131314e978ad0394abd23fIn the (Very) Long Run We Are All Dead: Activation and Termination in SET-LRP/SARA-ATRPHarrisson, Simon; Nicolas, JulienACS Macro Letters (2014), 3 (7), 643-647CODEN: AMLCCD; ISSN:2161-1653. (American Chemical Society)The rate consts. of activation and termination were detd. for SET-LRP/SARA-ATRP polymns. of Me acrylate. Measurement of the rate of generation of CuBr2 throughout the reaction (using data from Levere et al., Macromols.2012, 45, 8267-8274) allowed evaluation of the chain length dependence of the two rate consts., which were found to be 1.25(9) × 10-4DPn-0.51(3) cm·s-1 (activation) and 3.1(1) × 109DPn-0.49(2) L·mol-1·s-1 (termination). Addn. of the CuBr2 deactivator at the beginning of the reaction is found to result in a higher proportion of dead chains due to rapid termination of short chains. - 31Vandenbergh, J.; Junkers, T. Macromolecules 2014, 47) 5051
- 32Berthet, M.-A.; Zarafshani, Z.; Pfeifer, S.; Lutz, J.-F. Macromolecules 2010, 43, 44
- 33Leibfarth, F. A.; Mattson, K. M.; Fors, B. P.; Collins, H. A.; Hawker, C. J. Angew. Chem., Int. Ed. 2013, 52, 199[Crossref], [CAS], Google Scholar33https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC38XhslSrsL%252FP&md5=d9d5f1205d231fab5a97b7e589f22954External Regulation of Controlled PolymerizationsLeibfarth, Frank A.; Mattson, Kaila M.; Fors, Brett P.; Collins, Hazel A.; Hawker, Craig J.Angewandte Chemie, International Edition (2013), 52 (1), 199-210CODEN: ACIEF5; ISSN:1433-7851. (Wiley-VCH Verlag GmbH & Co. KGaA)A review. Polymer chemists, through advances in controlled polymn. techniques and reliable post-functionalization methods, now have the tools to create materials of almost infinite variety and architecture. Many relevant challenges in materials science, however, require not only functional polymers but also on-demand access to the properties and performance they provide. The power of such temporal and spatial control of polymn. can be found in nature, where the prodn. of proteins, nucleic acids, and polysaccharides helps regulate multicomponent systems and maintain homeostasis. Here we review existing strategies for temporal control of polymns. through external stimuli including chem. reagents, applied voltage, light, and mech. force. Recent work illustrates the considerable potential for this emerging field and provides a coherent vision and set of criteria for pursuing future strategies for regulating controlled polymns.
- 34Lutz, J.-F.; Schmidt, B. V. K. J.; Pfeifer, S. Macromol. Rapid Commun. 2011, 32, 127
- 35Pfeifer, S.; Lutz, J.-F. J. Am. Chem. Soc. 2007, 129, 9542
- 36Pfeifer, S.; Lutz, J.-F. Chem.—Eur. J. 2008, 14, 10949[Crossref], [PubMed], [CAS], Google Scholar36https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BD1MXhtFSgug%253D%253D&md5=04db09b5e4f893e9e18bf0eeafa68840Development of a library of n-substituted maleimides for the local functionalization of linear polymer chainsPfeifer, Sebastian; Lutz, Jean-FrancoisChemistry - A European Journal (2008), 14 (35), 10949-10957CODEN: CEUJED; ISSN:0947-6539. (Wiley-VCH Verlag GmbH & Co. KGaA)A novel kinetic process was studied for functionalizing "on-demand" local regions of well-defined linear polystyrene chains. This concept relies on the atom transfer radical co-polymn. (ATRP) of functional N-substituted maleimides with styrene. This copolymn. is a controlled radical process, which combines two unique kinetic features: (i) all the polymers chains are growing simultaneously and (ii) the cross-propagation of the comonomers is highly-favored as compared to homopolymn. Thus, discrete amts. of N-substituted maleimides (e.g., 1 equiv as compared to initiator) are consumed extremely fast in the copolymn. process and are therefore locally incorporated in narrow regions of the growing polystyrene chains. MALDI-TOF anal. of model copolymers indicated that this kinetic concept is efficient. Although a sequence distribution is obsd., well-defined polymer chains having only one or two functional maleimide units per chain were the most abundant species. Furthermore, the position of the functional groups in the polystyrene chains can be kinetically-controlled by adding the N-substituted maleimides at desired times during the course of the polymn. This method is versatile and can be applied to a wide variety of N-substituted maleimides. Herein, a library of 20 different maleimides bearing various functional groups (e.g., arom. moieties, fluorinated groups, hydroxy functions, protected esters, protected amines, light-responsive moieties, fluorophores and biorelevant functions such as short poly (ethylene glycol) segments or biotin moieties) was studied. In most cases, the functional N-substituted maleimides could be efficiently incorporated in the polystyrene chains.
- 37Chan-Seng, D.; Zamfir, M.; Lutz, J.-F. Angew. Chem., Int. Ed. 2012, 51, 12254
- 38Lutz, J.-F. Acc. Chem. Res. 2013, 46, 2696
- 39Zamfir, M.; Lutz, J.-F. Nat. Commun. 2012, 3, 1138
- 40Moatsou, D.; Hansell, C. F.; O’Reilly, R. K. Chem. Sci. 2014, 5, 2246[Crossref], [CAS], Google Scholar40https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXnsFSqtrw%253D&md5=5a99eacd5874b403e6c782bb66bb575dPrecision polymers: a kinetic approach for functional poly(norbornenes)Moatsou, Dafni; Hansell, Claire F.; O'Reilly, Rachel K.Chemical Science (2014), 5 (6), 2246-2250CODEN: CSHCCN; ISSN:2041-6520. (Royal Society of Chemistry)The potential control over monomer sequence in the ring-opening metathesis polymn. of functional norbornenes is explored based on the difference in reactivity of endo and exo isomers. This kinetic approach allows the rapid consumption of the exo-norbornene and insertion onto the growing poly(norbornene) chain within a narrow region of the overall polymer chain, while maintaining a homogeneous backbone. We herein demonstrate that this can be achieved using a range of functional monomers easily derived from com. available precursors while their polymn. is carried out in a controlled manner.
- 41McKee, M. L.; Milnes, P. J.; Bath, J.; Stulz, E.; Turberfield, A. J.; O’Reilly, R. K. Angew. Chem., Int. Ed. 2010, 49, 7948
- 42Lewandowski, B.; De Bo, G.; Ward, J. W.; Papmeyer, M.; Kuschel, S.; Aldegunde, M. J.; Gramlich, P. M. E.; Heckmann, D.; Goldup, S. M.; D’Souza, D. M.; Fernandes, A. E.; Leigh, D. A. Science 2013, 339, 189
- 43Niu, J.; Hili, R.; Liu, D. R. Nat. Chem. 2013, 5, 282[Crossref], [PubMed], [CAS], Google Scholar43https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3sXjtlKru7w%253D&md5=7c12fca0e3160985095b856e510bc77aEnzyme-free translation of DNA into sequence-defined synthetic polymers structurally unrelated to nucleic acidsNiu, Jia; Hili, Ryan; Liu, David R.Nature Chemistry (2013), 5 (4), 282-292CODEN: NCAHBB; ISSN:1755-4330. (Nature Publishing Group)The translation of DNA sequences into corresponding biopolymers enables the prodn., function and evolution of the macromols. of life. In contrast, methods to generate sequence-defined synthetic polymers with similar levels of control have remained elusive. Here, we report the development of a DNA-templated translation system that enables the enzyme-free translation of DNA templates into sequence-defined synthetic polymers that have no necessary structural relationship with nucleic acids. We demonstrate the efficiency, sequence-specificity and generality of this translation system by oligomerizing building blocks including polyethylene glycol, α-(D)-peptides, and β-peptides in a DNA-programmed manner. Sequence-defined synthetic polymers with mol. wts. of 26 kDa contg. 16 consecutively coupled building blocks and 90 densely functionalized β-amino acid residues were translated from DNA templates using this strategy. We integrated the DNA-templated translation system developed here into a complete cycle of translation, coding sequence replication, template regeneration and re-translation suitable for the iterated in vitro selection of functional sequence-defined synthetic polymers unrelated in structure to nucleic acids.
- 44Cho, C. Y.; Moran, E. J.; Cherry; Stephans, J. C.; Fodor, S. P.; Adams, C. L.; Sundaram, A.; Jacobs, J. W.; Schultz, P. G. Science 1993, 261, 1303
- 45Hartmann, L.; Börner, H. G. Adv. Mater. 2009, 21, 3425
- 46Sun, J.; Zuckermann, R. N. ACS Nano 2013, 7, 4715
- 47Rosales, A. M.; Segalman, R. A.; Zuckermann, R. N. Soft Matter 2013, 9, 8400
- 48Pfeifer, S.; Zarafshani, Z.; Badi, N.; Lutz, J.-F. J. Am. Chem. Soc. 2009, 131, 9195
- 49Espeel, P.; Carrette, L. L. G.; Bury, K.; Capenberghs, S.; Martins, J. C.; Du Prez, F. E.; Madder, A. Angew. Chem., Int. Ed. 2013, 52, 13261
- 50Solleder, S. C.; Meier, M. A. R. Angew. Chem., Int. Ed. 2014, 53, 711
- 51Trinh, T. T.; Oswald, L.; Chan-Seng, D.; Lutz, J.-F. Macromol. Rapid Commun. 2014, 35, 141
- 52Matyjaszewski, K.; Ziegler, M. J.; Arehart, S. V.; Greszta, D.; Pakula, T. J. Phys. Org. Chem. 2000, 13, 775[Crossref], [CAS], Google Scholar52https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BD3cXoslyitbk%253D&md5=a6b37080a3b5fb16ce5b28bc1651c730Gradient copolymers by atom transfer radical copolymerizationMatyjaszewski, Krzysztof; Ziegler, Michael J.; Arehart, Stephen V.; Greszta, Dorota; Pakula, TadeuszJournal of Physical Organic Chemistry (2000), 13 (12), 775-786CODEN: JPOCEE; ISSN:0894-3230. (John Wiley & Sons Ltd.)A review with 60 refs. Gradient copolymers, in which the instantaneous compn. varies continuously along each chain, are discussed in terms of theor. background, significance and examples from the literature. The specific focus is the use of atom transfer radical polymn. to synthesize gradient copolymers with various compn. profiles. Examples of gradient copolymers using ionic and controlled radical polymn. techniques are presented. Atom transfer radical polymn. has been used under both batch and semi-batch conditions to produce gradient copolymers. The phys. properties of gradient copolymers and possible future work in the field of gradient copolymers are discussed.
Cited By
This article is cited by 53 publications.
- Qiuhui Chang, Jian Jiang. Sequence Effects on the Salt-Enhancement Behavior of Polyelectrolytes Adsorption. Macromolecules 2022, 55 (3) , 897-905. https://doi.org/10.1021/acs.macromol.1c02243
- Capucine Loth, Laurence Charles, Jean-François Lutz, Maria Nerantzaki. Precisely Defined Aptamer-b-Poly(phosphodiester) Conjugates Prepared by Phosphoramidite Polymer Chemistry. ACS Macro Letters 2021, 10 (4) , 481-485. https://doi.org/10.1021/acsmacrolett.1c00164
- Kana Nishimori, Mizuki Tenjimbayashi, Masanobu Naito, Makoto Ouchi. Alternating Copolymers of Vinyl Catechol or Vinyl Phenol with Alkyl Maleimide for Adhesive and Water-Repellent Coating Materials. ACS Applied Polymer Materials 2020, 2 (11) , 4604-4612. https://doi.org/10.1021/acsapm.0c00682
- Christopher A. DeRosa, Xiang Qi Kua, Frank S. Bates, Marc A. Hillmyer. Step-Growth Polyesters with Biobased (R)-1,3-Butanediol. Industrial & Engineering Chemistry Research 2020, 59 (35) , 15598-15613. https://doi.org/10.1021/acs.iecr.0c03009
- Sarah L. Perry, Charles E. Sing. 100th Anniversary of Macromolecular Science Viewpoint: Opportunities in the Physics of Sequence-Defined Polymers. ACS Macro Letters 2020, 9 (2) , 216-225. https://doi.org/10.1021/acsmacrolett.0c00002
- Jean-François Lutz. 100th Anniversary of Macromolecular Science Viewpoint: Toward Artificial Life-Supporting Macromolecules. ACS Macro Letters 2020, 9 (2) , 185-189. https://doi.org/10.1021/acsmacrolett.9b00938
- Debra J. Audus and Juan J. de Pablo . Polymer Informatics: Opportunities and Challenges. ACS Macro Letters 2017, 6 (10) , 1078-1082. https://doi.org/10.1021/acsmacrolett.7b00228
- Makoto Ouchi and Mitsuo Sawamoto . 50th Anniversary Perspective: Metal-Catalyzed Living Radical Polymerization: Discovery and Perspective. Macromolecules 2017, 50 (7) , 2603-2614. https://doi.org/10.1021/acs.macromol.6b02711
- Sanjib Banerjee, Ilaria Domenichelli, and Bruno Ameduri . Nitroxide-Mediated Alternating Copolymerization of Vinyl Acetate with tert-Butyl-2-trifluoromethacrylate Using a SG1-Based Alkoxyamine. ACS Macro Letters 2016, 5 (11) , 1232-1236. https://doi.org/10.1021/acsmacrolett.6b00707
- Timothy P. Lodge (Editor) , Stuart J. Rowan (Deputy Editor) . The Expansion of ACS Macro Letters. ACS Macro Letters 2016, 5 (2) , 213-214. https://doi.org/10.1021/acsmacrolett.5b00942
- Stuart J. Rowan, Christopher Barner-Kowollik, Bert Klumperman, Pierre Gaspard, Robert B. Grubbs, Marc A. Hillmyer, Lian R. Hutchings, Mahesh K. Mahanthappa, Dafni Moatsou, Rachel K. O’Reilly, Makoto Ouchi, Mitsuo Sawamoto, and Timothy P. Lodge . Discussion on “Aperiodic Copolymers”. ACS Macro Letters 2016, 5 (1) , 1-3. https://doi.org/10.1021/acsmacrolett.5b00758
- Megan R. Hill, R. Nicholas Carmean, and Brent S. Sumerlin . Expanding the Scope of RAFT Polymerization: Recent Advances and New Horizons. Macromolecules 2015, 48 (16) , 5459-5469. https://doi.org/10.1021/acs.macromol.5b00342
- Jean-François Lutz . Coding Macromolecules: Inputting Information in Polymers Using Monomer-Based Alphabets. Macromolecules 2015, 48 (14) , 4759-4767. https://doi.org/10.1021/acs.macromol.5b00890
- Laurence Charles, Chloé Laure, Jean-François Lutz, and Raj Kumar Roy . MS/MS Sequencing of Digitally Encoded Poly(alkoxyamine amide)s. Macromolecules 2015, 48 (13) , 4319-4328. https://doi.org/10.1021/acs.macromol.5b01051
- Ze Zhang, Ye-Zi You, De-Cheng Wu, and Chun-Yan Hong . Syntheses of Sequence-Controlled Polymers via Consecutive Multicomponent Reactions. Macromolecules 2015, 48 (11) , 3414-3421. https://doi.org/10.1021/acs.macromol.5b00463
- Timothy P. Lodge (Editor), Stuart J. Rowan (Deputy Editor). The Impact of ACS Macro Letters. ACS Macro Letters 2015, 4 (1) , 63-64. https://doi.org/10.1021/mz500817x
- Tim Lodge (Editor), Stuart Rowan (Deputy Editor). Viewpoint Invitation. ACS Macro Letters 2014, 3 (10) , 1036-1036. https://doi.org/10.1021/mz500617m
- Kun Liu, Qiaoqiao Xiong, Zhuowei Gu, Fengli Xie, Feng Zhang, Shuai Yang, An Li, Jundong Xu, Wenjun Yi, Lijun Li. Highly efficient one-pot synthesis of anhydride-riched terpolymers from radical dual-alternating strategy. Journal of Polymer Research 2023, 30 (6) https://doi.org/10.1007/s10965-023-03538-4
- Samuel C. Leguizamon, Timothy F. Scott. Mimicking DNA Functions with Abiotic, Sequence-Defined Polymers. Polymer Reviews 2022, 62 (3) , 626-651. https://doi.org/10.1080/15583724.2021.2014519
- Suresh K. I., Rajender Nutenki, Tomy Murugayil Joseph, Sumi Murali. Structural, molecular and thermal properties of cardanol based monomers and polymers synthesized via atom transfer radical polymerization (ATRP). Journal of Macromolecular Science, Part A 2022, 59 (6) , 403-410. https://doi.org/10.1080/10601325.2022.2053288
- Maria Nerantzaki, Jean‐François Lutz. Multistep Growth “Polymerizations”. Macromolecular Chemistry and Physics 2022, 223 (12) , 2100368. https://doi.org/10.1002/macp.202100368
- Yuuichi Orimoto, Keisuke Hisama, Yuriko Aoki. Local electronic structure analysis by ab initio elongation method: A benchmark using DNA block polymers. The Journal of Chemical Physics 2022, 156 (20) , 204114. https://doi.org/10.1063/5.0087726
- A. R. Ayupova, T. A. Yangirov, B. M. Abdullin, R. Kh. Yumagulova, A. A. Fatykhov, V. A. Kraikin. Copoly(arylene phthalides) in the thermal polymerization of styrene. Russian Chemical Bulletin 2021, 70 (9) , 1804-1815. https://doi.org/10.1007/s11172-021-3286-0
- Kevin A. Waibel, Dafni Moatsou, Michael A. R. Meier. Synthesis and Encapsulation of Uniform Star‐Shaped Block‐Macromolecules. Macromolecular Rapid Communications 2021, 42 (6) , 2000467. https://doi.org/10.1002/marc.202000467
- Heyu Shen, Xuefei Leng, Li Han, Pibo Liu, Chao Li, Songbo Zhang, Lan Lei, Hongwei Ma, Yang Li. Investigating the effect of grafting density on the surface properties for sequence-determined fluoropolymer films. Polymer Chemistry 2020, 11 (38) , 6206-6214. https://doi.org/10.1039/D0PY01108H
- Ishita Mukherjee, Krishna Gopal Goswami, Priyadarsi De. Alternating Copolymers Based on Amino Acids and Peptides. 2020, 95-119. https://doi.org/10.1007/978-981-15-1251-3_5
- Katharina S. Wetzel, Michael A. R. Meier. Monodisperse, sequence-defined macromolecules as a tool to evaluate the limits of ring-closing metathesis. Polymer Chemistry 2019, 10 (21) , 2716-2722. https://doi.org/10.1039/C9PY00438F
- Kun Liu, An Li, Zan Yang, AoLin Jiang, FengLi Xie, Shan Li, JinKui Xia, ZhenYin She, KeWen Tang, CongShan Zhou. Synthesis of strictly alternating copolymers by living carbanionic copolymerization of diphenylethylene with 1,3-pentadiene isomers. Polymer Chemistry 2019, 10 (14) , 1787-1794. https://doi.org/10.1039/C9PY00008A
- Michael R. Buchmeiser. Functional Precision Polymers via Stereo- and Regioselective Polymerization Using Group 6 Metal Alkylidene and Group 6 and 8 Metal Alkylidene N -Heterocyclic Carbene Complexes. Macromolecular Rapid Communications 2019, 40 (1) , 1800492. https://doi.org/10.1002/marc.201800492
- James S. Peerless, Nina J. B. Milliken, Thomas J. Oweida, Matthew D. Manning, Yaroslava G. Yingling. Soft Matter Informatics: Current Progress and Challenges. Advanced Theory and Simulations 2019, 2 (1) , 1800129. https://doi.org/10.1002/adts.201800129
- Roselyne B. Tchoua, Aswathy Ajith, Zhi Hong, Logan T. Ward, Kyle Chard, Alexander Belikov, Debra J. Audus, Shrayesh Patel, Juan J. de Pablo, Ian T. Foster. Creating Training Data for Scientific Named Entity Recognition with Minimal Human Effort. 2019, 398-411. https://doi.org/10.1007/978-3-030-22734-0_29
- Cangjie Yang, James P. Flynn, Jia Niu. Facile Synthesis of Sequence‐Regulated Synthetic Polymers Using Orthogonal SuFEx and CuAAC Click Reactions. Angewandte Chemie 2018, 130 (49) , 16426-16431. https://doi.org/10.1002/ange.201811051
- Cangjie Yang, James P. Flynn, Jia Niu. Facile Synthesis of Sequence‐Regulated Synthetic Polymers Using Orthogonal SuFEx and CuAAC Click Reactions. Angewandte Chemie International Edition 2018, 57 (49) , 16194-16199. https://doi.org/10.1002/anie.201811051
- Jean-François Lutz. Defining the Field of Sequence-Controlled Polymers. 2017, 1-26. https://doi.org/10.1002/9783527806096.ch1
- Jordan H. Swisher, Jamie A. Nowalk, Michael A. Washington, Tara Y. Meyer. Properties and Applications of Sequence-Controlled Polymers. 2017, 435-478. https://doi.org/10.1002/9783527806096.ch15
- Pierre Gaspard. Kinetics and Thermodynamics of Sequence Regulation. 2017, 27-48. https://doi.org/10.1002/9783527806096.ch2
- Jean-François Lutz. Defining the Field of Sequence-Controlled Polymers. Macromolecular Rapid Communications 2017, 38 (24) , 1700582. https://doi.org/10.1002/marc.201700582
- Arman R. Ashraf, Justin J. Ryan, Michael M. Satkowski, Byeongdu Lee, Steven D. Smith, Richard J. Spontak. Bicomponent Block Copolymers Derived from One or More Random Copolymers as an Alternative Route to Controllable Phase Behavior. Macromolecular Rapid Communications 2017, 38 (17) , 1700207. https://doi.org/10.1002/marc.201700207
- Susanne C. Solleder, Rebekka V. Schneider, Katharina S. Wetzel, Andreas C. Boukis, Michael A. R. Meier. Recent Progress in the Design of Monodisperse, Sequence-Defined Macromolecules. Macromolecular Rapid Communications 2017, 38 (9) , 1600711. https://doi.org/10.1002/marc.201600711
- Jing Huang, S. Richard Turner. Recent advances in alternating copolymers: The synthesis, modification, and applications of precision polymers. Polymer 2017, 116 , 572-586. https://doi.org/10.1016/j.polymer.2017.01.020
- Prabhjot K. Saini, Giulia Fiorani, Robert T. Mathers, Charlotte K. Williams. Zinc versus Magnesium: Orthogonal Catalyst Reactivity in Selective Polymerizations of Epoxides, Bio-derived Anhydrides and Carbon Dioxide. Chemistry - A European Journal 2017, 23 (18) , 4260-4265. https://doi.org/10.1002/chem.201605690
- Gordon Vanderwoude, An-Chang Shi. Effects of Blockiness and Polydispersity on the Phase Behavior of Random Block Copolymers. Macromolecular Theory and Simulations 2017, 26 (1) , 1600044. https://doi.org/10.1002/mats.201600044
- Pibo Liu, Hongwei Ma, Wei Huang, Li Han, Xinyu Hao, Heyu Shen, Yu Bai, Yang Li. Sequence regulation in the living anionic copolymerization of styrene and 1-(4-dimethylaminophenyl)-1-phenylethylene by modification with different additives. Polymer Chemistry 2017, 8 (11) , 1778-1789. https://doi.org/10.1039/C6PY02229D
- Saptarshi Chakraborty, Haridas Kar, Amrita Sikder, Suhrit Ghosh. Steric ploy for alternating donor–acceptor co-assembly and cooperative supramolecular polymerization. Chemical Science 2017, 8 (2) , 1040-1045. https://doi.org/10.1039/C6SC02640K
- Sofia Telitel, Benoît Éric Petit, Salomé Poyer, Laurence Charles, Jean-François Lutz. Sequence-coded ATRP macroinitiators. Polymer Chemistry 2017, 8 (34) , 4988-4991. https://doi.org/10.1039/C7PY00496F
- Guillaume Moriceau, Guillaume Gody, Matthias Hartlieb, Joby Winn, HyungSoo Kim, Antonio Mastrangelo, Timothy Smith, Sébastien Perrier. Functional multisite copolymer by one-pot sequential RAFT copolymerization of styrene and maleic anhydride. Polymer Chemistry 2017, 8 (28) , 4152-4161. https://doi.org/10.1039/C7PY00787F
- Guillaume Fiers, Dalila Chouikhi, Laurence Oswald, Abdelaziz Al Ouahabi, Delphine Chan-Seng, Laurence Charles, Jean-François Lutz. Orthogonal Synthesis of Xeno Nucleic Acids. Chemistry - A European Journal 2016, 22 (50) , 17945-17948. https://doi.org/10.1002/chem.201604386
- Abdelaziz Al Ouahabi, Raj Kumar Roy, Jean-François Lutz. Synthesis of Non-natural Polymers with Controlled Primary Structures. 2016, 66-106. https://doi.org/10.1039/9781782626664-00066
- Olga Philippova. Solution Properties of Associating Polymers. 2016, 141-158. https://doi.org/10.1002/9781118887813.ch5
- Guillaume Gody, Per B. Zetterlund, Sébastien Perrier, Simon Harrisson. The limits of precision monomer placement in chain growth polymerization. Nature Communications 2016, 7 (1) https://doi.org/10.1038/ncomms10514
- Chengke Qu, Junpo He. Recent developments in the synthesis of sequence controlled polymers. Science China Chemistry 2015, 58 (11) , 1651-1662. https://doi.org/10.1007/s11426-015-5476-9
- Thanh Tam Trinh, Chloé Laure, Jean-François Lutz. Synthesis of Monodisperse Sequence-Defined Polymers Using Protecting-Group-Free Iterative Strategies. Macromolecular Chemistry and Physics 2015, 216 (14) , 1498-1506. https://doi.org/10.1002/macp.201500072
- K. Murata, K. Saito, S. Kikuchi, M. Akita, A. Inagaki. Visible-light-controlled homo- and copolymerization of styrenes by a bichromophoric Ir–Pd catalyst. Chemical Communications 2015, 51 (26) , 5717-5720. https://doi.org/10.1039/C5CC00611B
Abstract
Figure 1
Figure 1. (a) Proposed definition for sequence-controlled and sequence-defined copolymers. (9) (b) Some official (blue), nonofficial (gray), and nonexisting (red) terms to denote synthetic copolymers. Note that the color code is only valid for (b). The colors displayed in (a) are used for aesthetic reasons only.
Figure 2
Figure 2. Schematic representation of different types of aperiodic copolymers: multiblock copolymers (left), multisite copolymers obtained using time-controlled monomer additions (middle), and monodisperse sequence-defined copolymers (right). The ellipse points displayed at the extremities only mean that the sequences can be longer than shown.
References
ARTICLE SECTIONSThis article references 52 other publications.
- 1Schrödinger, E. What is Life?; The McMillan Company: New York, 1945.Google ScholarThere is no corresponding record for this reference.
- 2Watson, J. D.; Crick, F. H. C. Nature 1953, 171, 737[Crossref], [PubMed], [CAS], Google Scholar2https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaG2cXivVGktA%253D%253D&md5=66b78cf4b12c8c5ced56ff75a9468f35Molecular structure of nucleic acids. A structure for deoxyribose nucleic acidWatson, J. D.; Crick, F. H. C.Nature (London, United Kingdom) (1953), 171 (), 737-8CODEN: NATUAS; ISSN:0028-0836.W. and C. propose a new structure for the Na salt of deoxyribose nucleic acid. This structure, which loosely resembles Furberg's model No. 1 (C.A. 47, 9924g), has 2 helical polynucleotide chains each coiled around the same axis but whose sequence of atoms runs in opposite directions. The chains are held together by H-bonding between purine and pyrimidine bases, a purine of 1 chain bonded to a pyrimidine of the other. Full details will be published elsewhere.
- 3Peng, C. K.; Buldyrev, S. V.; Goldberger, A. L.; Havlin, S.; Sciortino, F.; Simons, M.; Stanley, H. E. Nature 1992, 356, 168
It should be noted that long-range correlations have been observed in nucleotide sequences. Although this topic is out of the scope of this viewpoint, additional information can be found in the following article:
- 4Ring, W.; Mita, I.; Jenkins, A. D.; Bikales, N. M. Pure Appl. Chem. 1985, 57, 1427[Crossref], [CAS], Google Scholar4https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaL2MXmtFGrsL8%253D&md5=f73e02e6f0952da7e959a6daa73006d8Source-based nomenclature for copolymersRing, W.; Mita, I.; Jenkins, A. D.; Bikales, N. M.Pure and Applied Chemistry (1985), 57 (10), 1427-40CODEN: PACHAS; ISSN:0033-4545.A systematic source-based nomenclature system for copolymers was proposed. The nomenclature system identified the constituent monomers and provided a description of the sequence arrangement of the different types (such as unspecified, statistical, random, alternating, periodic, block, and graft) of monomeric units present.
- 5Compendium of Polymer Terminology and Nomenclature, IUPAC Recommendations 2008, 2nd ed.; Jones, R. G.; Wilks, E. S.; Metanomski, W. V.; Kahovec, J.; Hess, M.; Stepto, R.; Kitayama, T., Eds.; RSC: U.K., 2009.
- 6Lutz, J.-F.; Ouchi, M.; Liu, D. R.; Sawamoto, M. Science 2013, 341, 1238149[Crossref], [PubMed], [CAS], Google Scholar6https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A280%3ADC%252BC3sfot1Crtg%253D%253D&md5=8f1340d51b6d30b0ce7afd68d97d39bfSequence-controlled polymersLutz Jean-Francois; Ouchi Makoto; Liu David R; Sawamoto MitsuoScience (New York, N.Y.) (2013), 341 (6146), 1238149 ISSN:.Sequence-controlled polymers are macromolecules in which monomer units of different chemical nature are arranged in an ordered fashion. The most prominent examples are biological and have been studied and used primarily by molecular biologists and biochemists. However, recent progress in protein- and DNA-based nanotechnologies has shown the relevance of sequence-controlled polymers to nonbiological applications, including data storage, nanoelectronics, and catalysis. In addition, synthetic polymer chemistry has provided interesting routes for preparing nonnatural sequence-controlled polymers. Although these synthetic macromolecules do not yet compare in functional scope with their natural counterparts, they open up opportunities for controlling the structure, self-assembly, and macroscopic properties of polymer materials.
- 7Badi, N.; Lutz, J.-F. Chem. Soc. Rev. 2009, 38, 3383
- 8Lutz, J.-F. Polym. Chem. 2010, 1, 55[Crossref], [CAS], Google Scholar8https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3cXlt1eksro%253D&md5=52a03493d19ab8832da61ad70929fac7Sequence-controlled polymerizations: the next Holy Grail in polymer science?Lutz, Jean-FrancoisPolymer Chemistry (2010), 1 (1), 55-62CODEN: PCOHC2; ISSN:1759-9962. (Royal Society of Chemistry)A review. The aim of this short perspective article is to sensitize polymer chemists to the importance of controlling comonomer sequences. During the last twenty years, our scientific community has made impressive progress in controlling the architecture of synthetic macromols. (i.e. chain length, shape and compn.). In comparison, our tools for controlling polymer microstructures (i.e. sequences and tacticity) are still very rudimentary. However, as learned from Nature, sequence-controlled polymers are most likely the key toward functional sub-nanometric materials.
- 9Sequence-Controlled Polymers: Synthesis, Self-Assembly, and Properties; ACS Symposium Series; Lutz, J.-F.; Meyer, T.; Ouchi, M.; Sawamoto, M., Eds.; ACS: Washington DC, 2014, Vol. 1170.
- 10Colquhoun, H.; Lutz, J.-F. Nat. Chem. 2014, 6, 455[Crossref], [PubMed], [CAS], Google Scholar10https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXot1ylt7g%253D&md5=3796bcfa9179656c4f91a798809dcb49Information-containing macromoleculesColquhoun, Howard; Lutz, Jean-FrancoisNature Chemistry (2014), 6 (6), 455-456CODEN: NCAHBB; ISSN:1755-4330. (Nature Publishing Group)Howard Colquhoun and Jean-Francois Lutz consider the potential of synthetic polymers for storing information at the mol. level.
- 11
The IUPAC Gold book includes the definition of an irregular macromolecule. The words irregular and aperiodic have related meanings. However, the current definition of an irregular macromolecule is broad and includes uncontrolled situations (e.g., random copolymers). There is also no official definition for an irregular copolymer.
There is no corresponding record for this reference. - 12Blackwell, J.; Gutierrez, G. A.; Chivers, R. A. Macromolecules 1984, 17, 1219
- 13Stupp, S. I.; Moore, J. S.; Martin, P. G. Macromolecules 1988, 21, 1228
- 14Stupp, S. I.; Wu, J. L.; Moore, J. S.; Martin, P. G. Macromolecules 1991, 24, 6399
- 15Bakhshi, A. K.; Pooja J. Chem. Soc., Faraday Trans. 1996, 92, 5017
- 16Leibler, L. Macromolecules 1980, 13, 1602[ACS Full Text
], [CAS], Google Scholar
16https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADyaL3cXmt1WitL0%253D&md5=8e7d668b6beac4bf27d558df34b7f1ebTheory of microphase separation in block copolymersLeibler, LudwikMacromolecules (1980), 13 (6), 1602-17CODEN: MAMOBX; ISSN:0024-9297.A microscopic, statistical theory of phase equil. in noncryst. AB block polymers is presented. The product of the Flory interaction parameter (χ) and d.p., and the fractional compn. of the chain, are the only relevant parameters. Under certain crit. conditions, formation of an unstable mode in the polymer melt precedes the microphase sepn. transition. After this transition, a mesophase with the symmetry of a bcc. lattice, expected to be a metastable phase over a wide range of compns., should appear. The regions of stability are calcd. and the phase diagram of the system is given. A new method for measuring χ is proposed. - 17Bates, F. S. Science 1991, 251, 898
- 18Matsen, M. W.; Bates, F. S. Macromolecules 1996, 29, 1091
- 19Ruzette, A.-V.; Leibler, L. Nat. Mater. 2005, 4, 19
- 20
It should be reminded to nonspecialist readers that the letters ABC are generally used to denote a single block in a block copolymer; i.e., the letter A denotes a series of similar monomers -AAAAAAAA-. For instance, the multiblock copolymer shown on the left of Figure 2 would be named ABACB. This should not be confused with the ABC code that is employed to describe random, alternating, and periodic copolymers. In such copolymers, each capital letter denotes a single monomer unit.
There is no corresponding record for this reference. - 21Bates, F. S.; Hillmyer, M. A.; Lodge, T. P.; Bates, C. M.; Delaney, K. T.; Fredrickson, G. H. Science 2012, 336, 434[Crossref], [PubMed], [CAS], Google Scholar21https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC38XlvFGqtrY%253D&md5=baab5bb4f82bce93a82db172882a711bMultiblock Polymers: Panacea or Pandora's Box?Bates, Frank S.; Hillmyer, Marc A.; Lodge, Timothy P.; Bates, Christopher M.; Delaney, Kris T.; Fredrickson, Glenn H.Science (Washington, DC, United States) (2012), 336 (6080), 434-440CODEN: SCIEAS; ISSN:0036-8075. (American Association for the Advancement of Science)A review. Advances in synthetic polymer chem. have unleashed seemingly unlimited strategies for producing block polymers with arbitrary nos. (n) and types (k) of unique sequences of repeating units. Increasing (k,n) leads to a geometric expansion of possible mol. architectures, beyond conventional ABA-type triblock copolymers (k = 2, n = 3), offering alluring opportunities to generate exquisitely tailored materials with unparalleled control over nanoscale-domain geometry, packing symmetry, and chem. compn. Transforming this potential into targeted structures endowed with useful properties hinges on imaginative mol. designs guided by predictive theory and computer simulation. Here, we review recent developments in the field of block polymers.
- 22Koo, C. M.; Hillmyer, M. A.; Bates, F. S. Macromolecules 2005, 39, 667
- 23Nagata, Y.; Masuda, J.; Noro, A.; Cho, D.; Takano, A.; Matsushita, Y. Macromolecules 2005, 38, 10220
- 24Wu, L.; Lodge, T. P.; Bates, F. S. Macromolecules 2005, 39, 294
- 25Sugiyama, K.; Oie, T.; El-Magd, A. A.; Hirao, A. Macromolecules 2010, 43, 1403
- 26Kim, J. G.; Cowman, C. D.; LaPointe, A. M.; Wiesner, U.; Coates, G. W. Macromolecules 2011, 44, 1110[ACS Full Text
], [CAS], Google Scholar
26https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXhsVertrs%253D&md5=44a7a4707c70f8fda4006340920c6c58Tailored Living Block Copolymerization: Multiblock Poly(cyclohexene carbonate)s with Sequence ControlKim, Jeung Gon; Cowman, Christina D.; LaPointe, Anne M.; Wiesner, Ulrich; Coates, Geoffrey W.Macromolecules (Washington, DC, United States) (2011), 44 (5), 1110-1113CODEN: MAMOBX; ISSN:0024-9297. (American Chemical Society)The living block copolymn. of functionalized cyclohexene oxides and CO2 is described, yielding multiblock poly(cyclohexene carbonate)s [p(CHC)s] with a diverse range of functionality on the side chains and good control of block sequence and length. Unlike prior systems that contain stable vinyl backbones, the carbonate backbones of polymers reported herein are degradable, allowing possible applications where removable templates are required. - 27Soeriyadi, A. H.; Boyer, C.; Nyström, F.; Zetterlund, P. B.; Whittaker, M. R. J. Am. Chem. Soc. 2011, 133, 11128[ACS Full Text
], [CAS], Google Scholar
27https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXotlaisL4%253D&md5=4c5d4a472591c936b7930c307e6b7c81High-Order Multiblock Copolymers via Iterative Cu(0)-Mediated Radical Polymerizations (SET-LRP): Toward Biological PrecisionSoeriyadi, Alexander H.; Boyer, Cyrille; Nystrom, Fredrik; Zetterlund, Per B.; Whittaker, Michael R.Journal of the American Chemical Society (2011), 133 (29), 11128-11131CODEN: JACSAT; ISSN:0002-7863. (American Chemical Society)We report a new approach for the facile synthesis of high-order multiblock copolymers comprising very short blocks. The approach entails sequential addn. of different monomers via an iterative single electron transfer-living radical polymn. technique, allowing nearly perfect control of the copolymer microstructure. It is possible to synthesize high-order multiblock copolymers with unprecedented control, i.e., A-B-C-D-E-etc., without any need for purifn. between iterative 24 h block formation steps. To illustrate this concept, we report the synthesis of model P(MA-b-MA...) homopolymer and P(MA-b-nBuA-b-EA-b-2EHA-b-EA-b-nBuA) copolymer in extremely high yield. Finally, the halide end-group can be modified via "click chem.", including thiol-bromide click chem., sodium methanethiosulfonate nucleophilic substitution, and atom transfer radical nitroxide coupling reaction, to yield functional, structurally complex macromols. - 28Boyer, C.; Soeriyadi, A. H.; Zetterlund, P. B.; Whittaker, M. R. Macromolecules 2011, 44, 8028[ACS Full Text
], [CAS], Google Scholar
28https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3MXhtFyksrjI&md5=56d6cd0ec1c54d2016fcb87a398d0352Synthesis of Complex Multiblock Copolymers via a Simple Iterative Cu(0)-Mediated Radical Polymerization ApproachBoyer, Cyrille; Soeriyadi, Alexander H.; Zetterlund, Per B.; Whittaker, Michael R.Macromolecules (Washington, DC, United States) (2011), 44 (20), 8028-8033CODEN: MAMOBX; ISSN:0024-9297. (American Chemical Society)Controlled/living radical polymn. is an efficient technique for the synthesis of well-defined polymeric architectures, including copolymers, block copolymers, stars, graft, and variations thereof. In this article, the authors report for the first time the synthesis of a decablock copolymer via a simple and efficient iterative Cu(0)-mediated radical polymn. technique. In this approach, purifn. is not required between the iterative chain extension steps, as each block formation is taken to full conversion. The final decablock copolymer can be obtained with a yield in mass of ∼90%. Using traditional controlled/living radical polymn. techniques, including reversible addn.-fragmentation chain transfer (RAFT) polymn., nitroxide-mediated polymn. (NMP), or atom transfer radical polymn. (ATRP), synthesis of decablock copolymer in such high yield is very difficult (and may be impossible) and requires numerous purifn. steps. The synthesis of the final complex copolymers required the concomitant synthesis of 16 architecturally discrete block copolymers. - 29Gody, G.; Maschmeyer, T.; Zetterlund, P. B.; Perrier, S. Nat. Commun. 2013, 4Google ScholarThere is no corresponding record for this reference.
- 30Harrisson, S.; Nicolas, J. ACS Macro Lett. 2014, 3, 643[ACS Full Text
], [CAS], Google Scholar
30https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXpslynsrk%253D&md5=27522de7ce131314e978ad0394abd23fIn the (Very) Long Run We Are All Dead: Activation and Termination in SET-LRP/SARA-ATRPHarrisson, Simon; Nicolas, JulienACS Macro Letters (2014), 3 (7), 643-647CODEN: AMLCCD; ISSN:2161-1653. (American Chemical Society)The rate consts. of activation and termination were detd. for SET-LRP/SARA-ATRP polymns. of Me acrylate. Measurement of the rate of generation of CuBr2 throughout the reaction (using data from Levere et al., Macromols.2012, 45, 8267-8274) allowed evaluation of the chain length dependence of the two rate consts., which were found to be 1.25(9) × 10-4DPn-0.51(3) cm·s-1 (activation) and 3.1(1) × 109DPn-0.49(2) L·mol-1·s-1 (termination). Addn. of the CuBr2 deactivator at the beginning of the reaction is found to result in a higher proportion of dead chains due to rapid termination of short chains. - 31Vandenbergh, J.; Junkers, T. Macromolecules 2014, 47) 5051
- 32Berthet, M.-A.; Zarafshani, Z.; Pfeifer, S.; Lutz, J.-F. Macromolecules 2010, 43, 44
- 33Leibfarth, F. A.; Mattson, K. M.; Fors, B. P.; Collins, H. A.; Hawker, C. J. Angew. Chem., Int. Ed. 2013, 52, 199[Crossref], [CAS], Google Scholar33https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC38XhslSrsL%252FP&md5=d9d5f1205d231fab5a97b7e589f22954External Regulation of Controlled PolymerizationsLeibfarth, Frank A.; Mattson, Kaila M.; Fors, Brett P.; Collins, Hazel A.; Hawker, Craig J.Angewandte Chemie, International Edition (2013), 52 (1), 199-210CODEN: ACIEF5; ISSN:1433-7851. (Wiley-VCH Verlag GmbH & Co. KGaA)A review. Polymer chemists, through advances in controlled polymn. techniques and reliable post-functionalization methods, now have the tools to create materials of almost infinite variety and architecture. Many relevant challenges in materials science, however, require not only functional polymers but also on-demand access to the properties and performance they provide. The power of such temporal and spatial control of polymn. can be found in nature, where the prodn. of proteins, nucleic acids, and polysaccharides helps regulate multicomponent systems and maintain homeostasis. Here we review existing strategies for temporal control of polymns. through external stimuli including chem. reagents, applied voltage, light, and mech. force. Recent work illustrates the considerable potential for this emerging field and provides a coherent vision and set of criteria for pursuing future strategies for regulating controlled polymns.
- 34Lutz, J.-F.; Schmidt, B. V. K. J.; Pfeifer, S. Macromol. Rapid Commun. 2011, 32, 127
- 35Pfeifer, S.; Lutz, J.-F. J. Am. Chem. Soc. 2007, 129, 9542
- 36Pfeifer, S.; Lutz, J.-F. Chem.—Eur. J. 2008, 14, 10949[Crossref], [PubMed], [CAS], Google Scholar36https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BD1MXhtFSgug%253D%253D&md5=04db09b5e4f893e9e18bf0eeafa68840Development of a library of n-substituted maleimides for the local functionalization of linear polymer chainsPfeifer, Sebastian; Lutz, Jean-FrancoisChemistry - A European Journal (2008), 14 (35), 10949-10957CODEN: CEUJED; ISSN:0947-6539. (Wiley-VCH Verlag GmbH & Co. KGaA)A novel kinetic process was studied for functionalizing "on-demand" local regions of well-defined linear polystyrene chains. This concept relies on the atom transfer radical co-polymn. (ATRP) of functional N-substituted maleimides with styrene. This copolymn. is a controlled radical process, which combines two unique kinetic features: (i) all the polymers chains are growing simultaneously and (ii) the cross-propagation of the comonomers is highly-favored as compared to homopolymn. Thus, discrete amts. of N-substituted maleimides (e.g., 1 equiv as compared to initiator) are consumed extremely fast in the copolymn. process and are therefore locally incorporated in narrow regions of the growing polystyrene chains. MALDI-TOF anal. of model copolymers indicated that this kinetic concept is efficient. Although a sequence distribution is obsd., well-defined polymer chains having only one or two functional maleimide units per chain were the most abundant species. Furthermore, the position of the functional groups in the polystyrene chains can be kinetically-controlled by adding the N-substituted maleimides at desired times during the course of the polymn. This method is versatile and can be applied to a wide variety of N-substituted maleimides. Herein, a library of 20 different maleimides bearing various functional groups (e.g., arom. moieties, fluorinated groups, hydroxy functions, protected esters, protected amines, light-responsive moieties, fluorophores and biorelevant functions such as short poly (ethylene glycol) segments or biotin moieties) was studied. In most cases, the functional N-substituted maleimides could be efficiently incorporated in the polystyrene chains.
- 37Chan-Seng, D.; Zamfir, M.; Lutz, J.-F. Angew. Chem., Int. Ed. 2012, 51, 12254
- 38Lutz, J.-F. Acc. Chem. Res. 2013, 46, 2696
- 39Zamfir, M.; Lutz, J.-F. Nat. Commun. 2012, 3, 1138
- 40Moatsou, D.; Hansell, C. F.; O’Reilly, R. K. Chem. Sci. 2014, 5, 2246[Crossref], [CAS], Google Scholar40https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC2cXnsFSqtrw%253D&md5=5a99eacd5874b403e6c782bb66bb575dPrecision polymers: a kinetic approach for functional poly(norbornenes)Moatsou, Dafni; Hansell, Claire F.; O'Reilly, Rachel K.Chemical Science (2014), 5 (6), 2246-2250CODEN: CSHCCN; ISSN:2041-6520. (Royal Society of Chemistry)The potential control over monomer sequence in the ring-opening metathesis polymn. of functional norbornenes is explored based on the difference in reactivity of endo and exo isomers. This kinetic approach allows the rapid consumption of the exo-norbornene and insertion onto the growing poly(norbornene) chain within a narrow region of the overall polymer chain, while maintaining a homogeneous backbone. We herein demonstrate that this can be achieved using a range of functional monomers easily derived from com. available precursors while their polymn. is carried out in a controlled manner.
- 41McKee, M. L.; Milnes, P. J.; Bath, J.; Stulz, E.; Turberfield, A. J.; O’Reilly, R. K. Angew. Chem., Int. Ed. 2010, 49, 7948
- 42Lewandowski, B.; De Bo, G.; Ward, J. W.; Papmeyer, M.; Kuschel, S.; Aldegunde, M. J.; Gramlich, P. M. E.; Heckmann, D.; Goldup, S. M.; D’Souza, D. M.; Fernandes, A. E.; Leigh, D. A. Science 2013, 339, 189
- 43Niu, J.; Hili, R.; Liu, D. R. Nat. Chem. 2013, 5, 282[Crossref], [PubMed], [CAS], Google Scholar43https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BC3sXjtlKru7w%253D&md5=7c12fca0e3160985095b856e510bc77aEnzyme-free translation of DNA into sequence-defined synthetic polymers structurally unrelated to nucleic acidsNiu, Jia; Hili, Ryan; Liu, David R.Nature Chemistry (2013), 5 (4), 282-292CODEN: NCAHBB; ISSN:1755-4330. (Nature Publishing Group)The translation of DNA sequences into corresponding biopolymers enables the prodn., function and evolution of the macromols. of life. In contrast, methods to generate sequence-defined synthetic polymers with similar levels of control have remained elusive. Here, we report the development of a DNA-templated translation system that enables the enzyme-free translation of DNA templates into sequence-defined synthetic polymers that have no necessary structural relationship with nucleic acids. We demonstrate the efficiency, sequence-specificity and generality of this translation system by oligomerizing building blocks including polyethylene glycol, α-(D)-peptides, and β-peptides in a DNA-programmed manner. Sequence-defined synthetic polymers with mol. wts. of 26 kDa contg. 16 consecutively coupled building blocks and 90 densely functionalized β-amino acid residues were translated from DNA templates using this strategy. We integrated the DNA-templated translation system developed here into a complete cycle of translation, coding sequence replication, template regeneration and re-translation suitable for the iterated in vitro selection of functional sequence-defined synthetic polymers unrelated in structure to nucleic acids.
- 44Cho, C. Y.; Moran, E. J.; Cherry; Stephans, J. C.; Fodor, S. P.; Adams, C. L.; Sundaram, A.; Jacobs, J. W.; Schultz, P. G. Science 1993, 261, 1303
- 45Hartmann, L.; Börner, H. G. Adv. Mater. 2009, 21, 3425
- 46Sun, J.; Zuckermann, R. N. ACS Nano 2013, 7, 4715
- 47Rosales, A. M.; Segalman, R. A.; Zuckermann, R. N. Soft Matter 2013, 9, 8400
- 48Pfeifer, S.; Zarafshani, Z.; Badi, N.; Lutz, J.-F. J. Am. Chem. Soc. 2009, 131, 9195
- 49Espeel, P.; Carrette, L. L. G.; Bury, K.; Capenberghs, S.; Martins, J. C.; Du Prez, F. E.; Madder, A. Angew. Chem., Int. Ed. 2013, 52, 13261
- 50Solleder, S. C.; Meier, M. A. R. Angew. Chem., Int. Ed. 2014, 53, 711
- 51Trinh, T. T.; Oswald, L.; Chan-Seng, D.; Lutz, J.-F. Macromol. Rapid Commun. 2014, 35, 141
- 52Matyjaszewski, K.; Ziegler, M. J.; Arehart, S. V.; Greszta, D.; Pakula, T. J. Phys. Org. Chem. 2000, 13, 775[Crossref], [CAS], Google Scholar52https://chemport.cas.org/services/resolver?origin=ACS&resolution=options&coi=1%3ACAS%3A528%3ADC%252BD3cXoslyitbk%253D&md5=a6b37080a3b5fb16ce5b28bc1651c730Gradient copolymers by atom transfer radical copolymerizationMatyjaszewski, Krzysztof; Ziegler, Michael J.; Arehart, Stephen V.; Greszta, Dorota; Pakula, TadeuszJournal of Physical Organic Chemistry (2000), 13 (12), 775-786CODEN: JPOCEE; ISSN:0894-3230. (John Wiley & Sons Ltd.)A review with 60 refs. Gradient copolymers, in which the instantaneous compn. varies continuously along each chain, are discussed in terms of theor. background, significance and examples from the literature. The specific focus is the use of atom transfer radical polymn. to synthesize gradient copolymers with various compn. profiles. Examples of gradient copolymers using ionic and controlled radical polymn. techniques are presented. Atom transfer radical polymn. has been used under both batch and semi-batch conditions to produce gradient copolymers. The phys. properties of gradient copolymers and possible future work in the field of gradient copolymers are discussed.