Pair your accounts.

Export articles to Mendeley

Get article recommendations from ACS based on references in your Mendeley library.

Pair your accounts.

Export articles to Mendeley

Get article recommendations from ACS based on references in your Mendeley library.

You’ve supercharged your research process with ACS and Mendeley!

STEP 1:
Click to create an ACS ID

Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

MENDELEY PAIRING EXPIRED
Your Mendeley pairing has expired. Please reconnect
ACS Publications. Most Trusted. Most Cited. Most Read
Nanoscale Capillary Flows in Alumina: Testing the Limits of Classical Theory
My Activity

Figure 1Loading Img
    Letter

    Nanoscale Capillary Flows in Alumina: Testing the Limits of Classical Theory
    Click to copy article linkArticle link copied!

    View Author Information
    School of Physics, University of Sydney, Sydney, NSW 2006, Australia
    Other Access OptionsSupporting Information (1)

    The Journal of Physical Chemistry Letters

    Cite this: J. Phys. Chem. Lett. 2016, 7, 14, 2647–2652
    Click to copy citationCitation copied!
    https://doi.org/10.1021/acs.jpclett.6b01021
    Published June 23, 2016
    Copyright © 2016 American Chemical Society

    Abstract

    Click to copy section linkSection link copied!
    Abstract Image

    Anodic aluminum oxide (AAO) membranes have well-formed cylindrical channels, as small as 10 nm in diameter, in a close packed hexagonal array. The channels in AAO membranes simulate very small leaks that may be present for example in an aluminum oxide device encapsulation. The 10 nm alumina channel is the smallest that has been studied to date for its moisture flow properties and provides a stringent test of classical capillary theory. We measure the rate at which moisture penetrates channels with diameters in the range of 10 to 120 nm with moist air present at 1 atm on one side and dry air at the same total pressure on the other. We extend classical theory for water leak rates at high humidities by allowing for variable meniscus curvature at the entrance and show that the extended theory explains why the flow increases greatly when capillary filling occurs and enables the contact angle to be determined. At low humidities our measurements for air-filled channels agree well with theory for the interdiffusive flow of water vapor in air. The flow rate of water-filled channels is one order of magnitude less than expected from classical capillary filling theory and is coincidentally equal to the helium flow rate, validating the use of helium leak testing for evaluating moisture flows in aluminum oxide leaks.

    Copyright © 2016 American Chemical Society

    Read this article

    To access this article, please review the available access options below.

    Get instant access

    Purchase Access

    Read this article for 48 hours. Check out below using your ACS ID or as a guest.

    Recommended

    Access through Your Institution

    You may have access to this article through your institution.

    Your institution does not have access to this content. Add or change your institution or let them know you’d like them to include access.

    Supporting Information

    Click to copy section linkSection link copied!

    The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.jpclett.6b01021.

    • Description of condensation of AAO nanopores, time-dependent phenomenon, and roughness of the channel wall (PDF)

    Terms & Conditions

    Most electronic Supporting Information files are available without a subscription to ACS Web Editions. Such files may be downloaded by article for research use (if there is a public use license linked to the relevant article, that license may permit other uses). Permission may be obtained from ACS for other uses through requests via the RightsLink permission system: http://pubs.acs.org/page/copyright/permissions.html.

    Cited By

    Click to copy section linkSection link copied!

    This article is cited by 15 publications.

    1. Geunyeol Gwon, Yujin Jung, Hyowon Hong, Heeyeong Cho, Hyunwoo Kim, Kyoung-Ho Kim, Nam Hoon Kim. Real-Time Monitoring of Molecules in Aqueous Solution via a Surface-Functionalized Ag-Anodic Aluminum Oxide Surface-Enhanced Raman Scattering Platform. ACS Applied Materials & Interfaces 2024, 16 (39) , 53123-53131. https://doi.org/10.1021/acsami.4c05885
    2. Máté Füredi, Cristina V. Manzano, András Marton, Bálint Fodor, Alberto Alvarez-Fernandez, Stefan Guldin. Beyond the Meso/Macroporous Boundary: Extending Capillary Condensation-Based Pore Size Characterization in Thin Films Through Tailored Adsorptives. The Journal of Physical Chemistry Letters 2024, 15 (5) , 1420-1427. https://doi.org/10.1021/acs.jpclett.3c03442
    3. Sergey E. Kushnir, Nadezhda P. Devyanina, Ilya V. Roslyakov, Nikolay V. Lyskov, Vasily S. Stolyarov, Kirill S. Napolskii. Stained Glass Effect in Anodic Aluminum Oxide Formed in Selenic Acid. The Journal of Physical Chemistry Letters 2024, 15 (1) , 298-306. https://doi.org/10.1021/acs.jpclett.3c03287
    4. Wenwen Lei, Nicole W.S. Fong, Karyn Louise Jarvis, David R. McKenzie. Quantifying Moisture Penetration in Encapsulated Devices by Heavy Water Mass Spectrometry: A Standard Moisture Leak Using Poly(ether-ether-ketone). ACS Applied Materials & Interfaces 2021, 13 (11) , 13666-13675. https://doi.org/10.1021/acsami.0c23115
    5. Masoumeh Nazari, Ali Masoudi, Parham Jafari, Peyman Irajizad, Varun Kashyap, Hadi Ghasemi. Ultrahigh Evaporative Heat Fluxes in Nanoconfined Geometries. Langmuir 2019, 35 (1) , 78-85. https://doi.org/10.1021/acs.langmuir.8b03463
    6. Junjie Zhong, Jason Riordon, Seyed Hadi Zandavi, Yi Xu, Aaron H. Persad, Farshid Mostowfi, and David Sinton . Capillary Condensation in 8 nm Deep Channels. The Journal of Physical Chemistry Letters 2018, 9 (3) , 497-503. https://doi.org/10.1021/acs.jpclett.7b03003
    7. Ekaterina N. Muratova, Alina A. Ponomareva, Andrey A. Shemukhin, Yuriy V. Balakshin, Aleksandr P. Evseev, Vyacheslav A. Moshnikov, Anton A. Zhilenkov, Olga Yu. Kichigina. The Influence of the Structural Parameters of Nanoporous Alumina Matrices on Optical Properties. Metals 2024, 14 (6) , 651. https://doi.org/10.3390/met14060651
    8. Thomas Loimer, Stepan K. Podgolin, Javad Sodagar-Abardeh, Dmitrii I. Petukhov, Andrei A. Eliseev. Influence of heat transfer and wetting angle on condensable fluid flow through nanoporous anodic alumina membranes. Physical Chemistry Chemical Physics 2023, 25 (4) , 3240-3250. https://doi.org/10.1039/D2CP04577J
    9. Daria I. Tishkevich, Alla I. Vorobjova, Anastasia A. Bondaruk, Elena S. Dashkevich, Dmitry L. Shimanovich, Ihar U. Razanau, Tatiana I. Zubar, Dmitry V. Yakimchuk, Mengge G. Dong, M. I. Sayyed, Hamoud H. Somaily, Denis A. Vinnik, Maxim V. Silibin, Sergei V. Trukhanov, Valery M. Fedosyuk, Alex V. Trukhanov. The Interrelation of Synthesis Conditions and Wettability Properties of the Porous Anodic Alumina Membranes. Nanomaterials 2022, 12 (14) , 2382. https://doi.org/10.3390/nano12142382
    10. Junghoon Lee, Youhua Jiang, Ferdi Hizal, Ga-Hee Ban, Soojin Jun, Chang-Hwan Choi. Durable omniphobicity of oil-impregnated anodic aluminum oxide nanostructured surfaces. Journal of Colloid and Interface Science 2019, 553 , 734-745. https://doi.org/10.1016/j.jcis.2019.06.068
    11. Masoumeh Nazari, Matt Gorman, Hadi Ghasemi. Unprecedented Capillary Evaporative Heat Flux in Nanochannels. 2019, 329-334. https://doi.org/10.1109/ITHERM.2019.8757337
    12. Navaladian Subramanian, Adnan Qamar, Ahmad Alsaadi, Adair Gallo, Muhammed Ghifari Ridwan, Jung-Gil Lee, Sreekiran Pillai, Sankara Arunachalam, Dalaver Anjum, Felix Sharipov, Noreddine Ghaffour, Himanshu Mishra. Evaluating the potential of superhydrophobic nanoporous alumina membranes for direct contact membrane distillation. Journal of Colloid and Interface Science 2019, 533 , 723-732. https://doi.org/10.1016/j.jcis.2018.08.054
    13. Hangao Yang, Tianzhun Wu, Saisai Zhao, Shanshan Xiong, Bo Peng, Mark S. Humayun. Chronically Implantable Package Based on Alumina Ceramics and Titanium with High-density Feedthroughs for Medical Implants. 2018, 3382-3385. https://doi.org/10.1109/EMBC.2018.8513004
    14. Samer Al-Gharabli, Eyad Hamad, Munib Saket, Ziad Abu El-Rub, Hassan Arafat, Wojciech Kujawski, Joanna Kujawa. Advanced Material-Ordered Nanotubular Ceramic Membranes Covalently Capped with Single-Wall Carbon Nanotubes. Materials 2018, 11 (5) , 739. https://doi.org/10.3390/ma11050739
    15. Z P Li, Z M Xu, X P Qu, S B Wang, J Peng, L H Mei. Fabrication of nanopore and nanoparticle arrays with high aspect ratio AAO masks. Nanotechnology 2017, 28 (9) , 095301. https://doi.org/10.1088/1361-6528/aa585c

    The Journal of Physical Chemistry Letters

    Cite this: J. Phys. Chem. Lett. 2016, 7, 14, 2647–2652
    Click to copy citationCitation copied!
    https://doi.org/10.1021/acs.jpclett.6b01021
    Published June 23, 2016
    Copyright © 2016 American Chemical Society

    Article Views

    654

    Altmetric

    -

    Citations

    Learn about these metrics

    Article Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.

    Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.

    The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated.