ACS Publications. Most Trusted. Most Cited. Most Read
My Activity
CONTENT TYPES

3D Printed Programmable Release Capsules

View Author Information
Department of Mechanical and Aerospace Engineering and Department of Electrical Engineering, Princeton University, Princeton, New Jersey 08544, United States
§ Department of Mechanical Engineering, University of Minnesota, Minneapolis, Minnesota 55455, United States
Department of Mechanical Engineering and Materials Science, Washington University in St. Louis, St. Louis, Missouri 63130, United States
*Tel (609) 542-0275; e-mail [email protected]
Cite this: Nano Lett. 2015, 15, 8, 5321–5329
Publication Date (Web):June 4, 2015
https://doi.org/10.1021/acs.nanolett.5b01688
Copyright © 2015 American Chemical Society

    Article Views

    6144

    Altmetric

    -

    Citations

    LEARN ABOUT THESE METRICS
    Other access options
    Supporting Info (3)»

    Abstract

    Abstract Image

    The development of methods for achieving precise spatiotemporal control over chemical and biomolecular gradients could enable significant advances in areas such as synthetic tissue engineering, biotic–abiotic interfaces, and bionanotechnology. Living organisms guide tissue development through highly orchestrated gradients of biomolecules that direct cell growth, migration, and differentiation. While numerous methods have been developed to manipulate and implement biomolecular gradients, integrating gradients into multiplexed, three-dimensional (3D) matrices remains a critical challenge. Here we present a method to 3D print stimuli-responsive core/shell capsules for programmable release of multiplexed gradients within hydrogel matrices. These capsules are composed of an aqueous core, which can be formulated to maintain the activity of payload biomolecules, and a poly(lactic-co-glycolic) acid (PLGA, an FDA approved polymer) shell. Importantly, the shell can be loaded with plasmonic gold nanorods (AuNRs), which permits selective rupturing of the capsule when irradiated with a laser wavelength specifically determined by the lengths of the nanorods. This precise control over space, time, and selectivity allows for the ability to pattern 2D and 3D multiplexed arrays of enzyme-loaded capsules along with tunable laser-triggered rupture and release of active enzymes into a hydrogel ambient. The advantages of this 3D printing-based method include (1) highly monodisperse capsules, (2) efficient encapsulation of biomolecular payloads, (3) precise spatial patterning of capsule arrays, (4) “on the fly” programmable reconfiguration of gradients, and (5) versatility for incorporation in hierarchical architectures. Indeed, 3D printing of programmable release capsules may represent a powerful new tool to enable spatiotemporal control over biomolecular gradients.

    Read this article

    To access this article, please review the available access options below.

    Get instant access

    Purchase Access

    Read this article for 48 hours. Check out below using your ACS ID or as a guest.

    Recommended

    Access through Your Institution

    You may have access to this article through your institution.

    Your institution does not have access to this content. You can change your affiliated institution below.

    Supporting Information

    ARTICLE SECTIONS
    Jump To

    Additional experimental details with materials, methods, and figures. The Supporting Information is available free of charge on the ACS Publications website at DOI: 10.1021/acs.nanolett.5b01688.

    Terms & Conditions

    Electronic Supporting Information files are available without a subscription to ACS Web Editions. The American Chemical Society holds a copyright ownership interest in any copyrightable Supporting Information. Files available from the ACS website may be downloaded for personal use only. Users are not otherwise permitted to reproduce, republish, redistribute, or sell any Supporting Information from the ACS website, either in whole or in part, in either machine-readable form or any other form without permission from the American Chemical Society. For permission to reproduce, republish and redistribute this material, requesters must process their own requests via the RightsLink permission system. Information about how to use the RightsLink permission system can be found at http://pubs.acs.org/page/copyright/permissions.html.

    Cited By

    This article is cited by 136 publications.

    1. Manqing Lin, Mengyi Tang, Wenzhe Duan, Shengkai Xia, Wenwen Liu, Qi Wang. 3D Bioprinting for Tumor Metastasis Research. ACS Biomaterials Science & Engineering 2023, 9 (6) , 3116-3133. https://doi.org/10.1021/acsbiomaterials.3c00239
    2. Taisuke Maki, Yosuke Muranaka, Saki Takeda, Kazuhiro Mae. Complex Polymer Nanoparticle Synthesis and Morphology Control Using an Inkjet Mixing System. Industrial & Engineering Chemistry Research 2023, 62 (2) , 991-997. https://doi.org/10.1021/acs.iecr.2c03767
    3. Shallu Kutlehria, Anisha D’Souza, Benjamin S. Bleier, Mansoor M. Amiji. Role of 3D Printing in the Development of Biodegradable Implants for Central Nervous System Drug Delivery. Molecular Pharmaceutics 2022, 19 (12) , 4411-4427. https://doi.org/10.1021/acs.molpharmaceut.2c00344
    4. Javier Plou, Mathias Charconnet, Isabel García, Javier Calvo, Luis M. Liz-Marzán. Preventing Memory Effects in Surface-Enhanced Raman Scattering Substrates by Polymer Coating and Laser-Activated Deprotection. ACS Nano 2021, 15 (5) , 8984-8995. https://doi.org/10.1021/acsnano.1c01878
    5. Matthew L. Bedell, Adam M. Navara, Yingying Du, Shengmin Zhang, Antonios G. Mikos. Polymeric Systems for Bioprinting. Chemical Reviews 2020, 120 (19) , 10744-10792. https://doi.org/10.1021/acs.chemrev.9b00834
    6. Ze Yin, Heng Guo, Yixuan Li, Joshua Chiu, Limei Tian. Ultrastable Plasmonic Bioink for Printable Point-Of-Care Biosensors. ACS Applied Materials & Interfaces 2020, 12 (32) , 35977-35985. https://doi.org/10.1021/acsami.0c11799
    7. Zhengyi Song, Luquan Ren, Che Zhao, Huili Liu, Zhenglei Yu, Qingping Liu, Lei Ren. Biomimetic Nonuniform, Dual-Stimuli Self-Morphing Enabled by Gradient Four-Dimensional Printing. ACS Applied Materials & Interfaces 2020, 12 (5) , 6351-6361. https://doi.org/10.1021/acsami.9b17577
    8. Bingda Chen, Meng Su, Qi Pan, Zeying Zhang, Shuoran Chen, Zhandong Huang, Zheren Cai, Zheng Li, Xin Qian, Xiaotian Hu, Yanlin Song. Fully Printed Geranium-Inspired Encapsulated Arrays for Quantitative Odor Releasing. ACS Omega 2019, 4 (22) , 19977-19982. https://doi.org/10.1021/acsomega.9b02916
    9. Liyun Huang, Kui Wu, Rui Zhang, Hongbing Ji. Fabrication of Multicore Milli- and Microcapsules for Controlling Hydrophobic Drugs Release Using a Facile Approach. Industrial & Engineering Chemistry Research 2019, 58 (36) , 17017-17026. https://doi.org/10.1021/acs.iecr.9b02351
    10. Elmeri Lahtinen, Lotta Turunen, Mikko M. Hänninen, Kalle Kolari, Heikki M. Tuononen, Matti Haukka. Fabrication of Porous Hydrogenation Catalysts by a Selective Laser Sintering 3D Printing Technique. ACS Omega 2019, 4 (7) , 12012-12017. https://doi.org/10.1021/acsomega.9b00711
    11. Alexander Lambert, Santino Valiulis, Quan Cheng. Advances in Optical Sensing and Bioanalysis Enabled by 3D Printing. ACS Sensors 2018, 3 (12) , 2475-2491. https://doi.org/10.1021/acssensors.8b01085
    12. Linda M. Guiney, Nikhita D. Mansukhani, Adam E. Jakus, Shay G. Wallace, Ramille N. Shah, Mark C. Hersam. Three-Dimensional Printing of Cytocompatible, Thermally Conductive Hexagonal Boron Nitride Nanocomposites. Nano Letters 2018, 18 (6) , 3488-3493. https://doi.org/10.1021/acs.nanolett.8b00555
    13. Milena Nadgorny, Amir Ameli. Functional Polymers and Nanocomposites for 3D Printing of Smart Structures and Devices. ACS Applied Materials & Interfaces 2018, 10 (21) , 17489-17507. https://doi.org/10.1021/acsami.8b01786
    14. Cole D. Brubaker, Michael A. Davies, James R. McBride, Sandra J. Rosenthal, G. Kane Jennings, Douglas E. Adams. Nondestructive Evaluation and Detection of Defects in 3D Printed Materials Using the Optical Properties of Gold Nanoparticles. ACS Applied Nano Materials 2018, 1 (3) , 1377-1384. https://doi.org/10.1021/acsanm.8b00142
    15. Samuel Clark Ligon, Robert Liska, Jürgen Stampfl, Matthias Gurr, and Rolf Mülhaupt . Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews 2017, 117 (15) , 10212-10290. https://doi.org/10.1021/acs.chemrev.7b00074
    16. Milena Nadgorny, Zeyun Xiao, Chao Chen, and Luke A. Connal . Three-Dimensional Printing of pH-Responsive and Functional Polymers on an Affordable Desktop Printer. ACS Applied Materials & Interfaces 2016, 8 (42) , 28946-28954. https://doi.org/10.1021/acsami.6b07388
    17. Rock J. Mancini, Samantha J. Paluck, Erhan Bat, and Heather D. Maynard . Encapsulated Hydrogels by E-beam Lithography and Their Use in Enzyme Cascade Reactions. Langmuir 2016, 32 (16) , 4043-4051. https://doi.org/10.1021/acs.langmuir.6b00560
    18. Limei Tian, Sirimuvva Tadepalli, Max Fei, Jeremiah J. Morrissey, Evan D. Kharasch, and Srikanth Singamaneni . Off-Resonant Gold Superstructures as Ultrabright Minimally Invasive Surface-Enhanced Raman Scattering (SERS) Probes. Chemistry of Materials 2015, 27 (16) , 5678-5684. https://doi.org/10.1021/acs.chemmater.5b02100
    19. Md. Habibur Rahman, Nilufar Yasmin Liza, Khan Rajib Hossain, Dipika Ramdas Kalambhe, Md. Abu Shyeed, Dilwar Hossain Noor. Additive manufacturing in nano drug delivery systems. Pharmaceutical Science Advances 2024, 2 , 100036. https://doi.org/10.1016/j.pscia.2024.100036
    20. Manoj K. Shukla, Charles M. Luft, Ashlyn M. Koval, William A. Pisani, Robert W. Lamb, Levi A. Lystrom, Brian D. Etz, Katarina M. Pittman, Michael R. Roth, Caitlin G. Bresnahan, Timothy C. Schutt, Glen R. Jenness, Harley R. McAlexander. Emerging Materials and Environment: A Brief Introduction. 2024, 1-78. https://doi.org/10.1007/978-3-031-39470-6_1
    21. Atheer Awad, Abdul W. Basit, Simon Gaisford, Alvaro Goyanes. Forging a Personalised Path: 3D Printing’s Role in Healthcare Transformation. 2024, 257-272. https://doi.org/10.1007/978-3-031-46015-9_10
    22. Lihuang Wu, Junhua Li, Yuqi Wang, Xinyue Zhao, Yiyan He, Hongli Mao, Wenbo Tang, Rong Liu, Kui Luo, Zhongwei Gu. Engineered Hierarchical Microdevices Enable Pre‐Programmed Controlled Release for Postsurgical and Unresectable Cancer Treatment. Advanced Materials 2023, 35 (51) https://doi.org/10.1002/adma.202305529
    23. Darya O. Shavronskaya, Alina O. Noskova, Natalia N. Skvortsova, Parise Adadi, Elena A. Nazarova, . Encapsulation of Hydrophobic Bioactive Substances for Food Applications: Carriers, Techniques, and Biosafety. Journal of Food Processing and Preservation 2023, 2023 , 1-21. https://doi.org/10.1155/2023/5578382
    24. Zijing Zhou, Weijie Tang, Jinfu Yang, Chengming Fan. Application of 4D printing and bioprinting in cardiovascular tissue engineering. Biomaterials Science 2023, 11 (19) , 6403-6420. https://doi.org/10.1039/D3BM00312D
    25. Souvik Ghosh, Siddhi Chaudhuri, Partha Roy, Debrupa Lahiri. 4D Printing in Biomedical Engineering: a State-of-the-Art Review of Technologies, Biomaterials, and Application. Regenerative Engineering and Translational Medicine 2023, 9 (3) , 339-365. https://doi.org/10.1007/s40883-022-00288-5
    26. Muneeb Ullah, Abdul Wahab, Shahid Ullah Khan, Muhammad Naeem, Khalil ur Rehman, Haider Ali, Aziz Ullah, Amjad Khan, Nauman Rahim Khan, Waleed Y. Rizg, Khaled M. Hosny, Mohammed Alissa, Moutaz Y. Badr, Hala M. Alkhalidi. 3D printing technology: A new approach for the fabrication of personalized and customized pharmaceuticals. European Polymer Journal 2023, 195 , 112240. https://doi.org/10.1016/j.eurpolymj.2023.112240
    27. Bin Xie, Weixian Zhao, Xiaobing Luo, Run Hu. Alignment engineering in thermal materials. Materials Science and Engineering: R: Reports 2023, 154 , 100738. https://doi.org/10.1016/j.mser.2023.100738
    28. Zhiqiang Zhu, Tianao Chen, Yuanqing Zhu, Fangsheng Huang, Kai Mu, Ting Si, Ronald X. Xu. Programmable pulsed aerodynamic printing for multi-interface composite manufacturing. Matter 2023, 6 (6) , 2034-2051. https://doi.org/10.1016/j.matt.2023.04.017
    29. Zichen Xu, Zehao Wu, Mingzhe Yuan, Yuanhe Chen, Wei Ge, Qingsong Xu. Versatile magnetic hydrogel soft capsule microrobots for targeted delivery. iScience 2023, 26 (5) , 106727. https://doi.org/10.1016/j.isci.2023.106727
    30. James Mason, Daniel Öhlund. Key aspects for conception and construction of co-culture models of tumor-stroma interactions. Frontiers in Bioengineering and Biotechnology 2023, 11 https://doi.org/10.3389/fbioe.2023.1150764
    31. Rahul M. Visalakshan, Mary K. Lowrey, Mauricio G. C. Sousa, Haylie R. Helms, Abrar Samiea, Carolyn E. Schutt, Josh M. Moreau, Luiz E. Bertassoni. Opportunities and challenges to engineer 3D models of tumor-adaptive immune interactions. Frontiers in Immunology 2023, 14 https://doi.org/10.3389/fimmu.2023.1162905
    32. Keiki Muranaka, Takuro Niidome, Maria Leilani Torres-Mapa, Alexander Heisterkamp, Mitsuhiro Terakawa. Formation of Gold Nanoparticles inside a Hydrogel by Multiphoton Photoreduction for Plasmonic Sensing. Plasmonics 2023, 18 (2) , 751-760. https://doi.org/10.1007/s11468-023-01804-1
    33. Jie Li, Bogdan V. Parakhonskiy, Andre G. Skirtach. A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules. Chemical Communications 2023, 59 (7) , 807-835. https://doi.org/10.1039/D2CC04806J
    34. Atheer Awad, Alvaro Goyanes, Abdul W. Basit, Ahmed S. Zidan, Changxue Xu, Wei Li, Roger J. Narayan, Roland K. Chen. A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine. Journal of Manufacturing Science and Engineering 2023, 145 (1) https://doi.org/10.1115/1.4056199
    35. Prashant Pingale, Shilpa Dawre, Vividha Dhapte-Pawar, Namdev Dhas, Amarjitsing Rajput. Advances in 4D printing: from stimulation to simulation. Drug Delivery and Translational Research 2023, 13 (1) , 164-188. https://doi.org/10.1007/s13346-022-01200-y
    36. Zhen Wang, Lei Xiang, Feng Lin, Yunkai Tang, Wenguo Cui. 3D bioprinting of emulating homeostasis regulation for regenerative medicine applications. Journal of Controlled Release 2023, 353 , 147-165. https://doi.org/10.1016/j.jconrel.2022.11.035
    37. Md Omar Faruque, Yugyung Lee, Gerald J. Wyckoff, Chi H. Lee. Application of 4D printing and AI to cardiovascular devices. Journal of Drug Delivery Science and Technology 2023, 609 , 104162. https://doi.org/10.1016/j.jddst.2023.104162
    38. Hanuma Reddy Tiyyagura, Peter Majerič, Žiga Jelen, Rebeka Rudolf. Gold nano-inks: synthesis and characterizations. 2023, 53-73. https://doi.org/10.1016/B978-0-323-91145-0.00017-7
    39. Atheer Awad, Abdul W. Basit. 3D and 4D Printing in Digital Healthcare. 2023, 1-23. https://doi.org/10.1007/978-3-031-34119-9_1
    40. Victor Ya. Prinz, Konstantin B. Fritzler. 3D Printed Biohybrid Microsystems. Advanced Materials Technologies 2023, 8 (2) https://doi.org/10.1002/admt.202101633
    41. Sajal Chakraborty, Kyeong-Keun Choi, Sung Il Ahn. Laser direct Cu patterning utilizing a commercially available low-cost 3D printer. Journal of Manufacturing Processes 2022, 84 , 531-538. https://doi.org/10.1016/j.jmapro.2022.10.021
    42. Dongyang Miao, Xianfeng Wang, Jianyong Yu, Bin Ding. Nanoengineered Textiles for Outdoor Personal Cooling and Drying. Advanced Functional Materials 2022, 32 (51) https://doi.org/10.1002/adfm.202209029
    43. Haiwei Zhai, Xiaowei Jin, Grayson Minnick, Jordan Rosenbohm, Mohammed Abdul Haleem Hafiz, Ruiguo Yang, Fanben Meng. Spatially Guided Construction of Multilayered Epidermal Models Recapturing Structural Hierarchy and Cell–Cell Junctions. Small Science 2022, 2 (11) https://doi.org/10.1002/smsc.202200051
    44. Zia Ullah Arif, Muhammad Yasir Khalid, Ali Zolfagharian, Mahdi Bodaghi. 4D bioprinting of smart polymers for biomedical applications: recent progress, challenges, and future perspectives. Reactive and Functional Polymers 2022, 179 , 105374. https://doi.org/10.1016/j.reactfunctpolym.2022.105374
    45. Pooja Jain, Himanshu Kathuria, Nileshkumar Dubey. Advances in 3D bioprinting of tissues/organs for regenerative medicine and in-vitro models. Biomaterials 2022, 287 , 121639. https://doi.org/10.1016/j.biomaterials.2022.121639
    46. Daily Rodriguez-Padron, Awais Ahmad, Pablo Romero-Carrillo, Rafael Luque, Roberto Esposito. 3D-printing design for continuous flow catalysis. Trends in Chemistry 2022, 4 (8) , 739-753. https://doi.org/10.1016/j.trechm.2022.05.005
    47. Oluwaseun A. Alo, David Mauchline, Iyiola O. Otunniyi. 3D‐Printed Functional Polymers and Nanocomposites: Defects Characterization and Product Quality Improvement. Advanced Engineering Materials 2022, 24 (5) https://doi.org/10.1002/adem.202101219
    48. Kazunari Yoshida, Kyosuke Nezu, Ajit Khosla, Masato Makino, Masaru Kawakami, Hidemitsu Furukawa. Behaviors of 3D-printed objects made of thermo-responsive hydrogels: motion in flow and molecule release ability. Microsystem Technologies 2022, 28 (1) , 417-422. https://doi.org/10.1007/s00542-020-04904-8
    49. Riccardo Pinos, Francesca V. Sbrana, Cristina Scielzo. Bioprinting functional tissues: cell types and a focus on cancer modeling. 2022, 247-269. https://doi.org/10.1016/B978-0-323-85430-6.00005-4
    50. Merve Nur SOYKAN, Tayfun ŞENGEL, Aliakbar EBRAHİMİ, Murat KAYA, Burcugül ALTUĞ TASA, Hamed GHORBANPOOR, Onur UYSAL, Ayla EKER SARIBOYACI, Huseyin AVCİ. Four-Dimensional Printing Technology at the Frontier of Advanced Modeling and Applications in Brain Tissue Engineering. Journal of Medical Innovation and Technology 2021, 3 (2) , 46-57. https://doi.org/10.51934/jomit.1016838
    51. Sonu Kumar. Synthetic polymer-derived single-network inks/bioinks for extrusion-based 3D printing towards bioapplications. Materials Advances 2021, 2 (21) , 6928-6941. https://doi.org/10.1039/D1MA00525A
    52. Taisuke Maki, Saki Takeda, Yosuke Muranaka, Kazuhiro Mae. Silver Nanoparticle Synthesis Using an Inkjet Mixing System. Frontiers in Chemical Engineering 2021, 3 https://doi.org/10.3389/fceng.2021.742322
    53. Livia M. Kalossaka, Giovanni Sena, Laura M.C. Barter, Connor Myant. Review: 3D printing hydrogels for the fabrication of soilless cultivation substrates. Applied Materials Today 2021, 24 , 101088. https://doi.org/10.1016/j.apmt.2021.101088
    54. Nathaniel Sheng Hua Too, Nicholas Ching Wei Ho, Christabella Adine, N Gopalakrishna Iyer, Eliza Li Shan Fong. Hot or cold: Bioengineering immune contextures into in vitro patient-derived tumor models. Advanced Drug Delivery Reviews 2021, 175 , 113791. https://doi.org/10.1016/j.addr.2021.05.001
    55. Ana Luisa Silva, Gabriel Maia da Silva Salvador, Sílvia V. F. Castro, Nakédia M. F. Carvalho, Rodrigo A. A. Munoz. A 3D Printer Guide for the Development and Application of Electrochemical Cells and Devices. Frontiers in Chemistry 2021, 9 https://doi.org/10.3389/fchem.2021.684256
    56. Shriya K. Patel, Mouhamad Khoder, Matthew Peak, Mohamed A. Alhnan. Controlling drug release with additive manufacturing-based solutions. Advanced Drug Delivery Reviews 2021, 174 , 369-386. https://doi.org/10.1016/j.addr.2021.04.020
    57. Shaoming Zhu, Zheng Zhu, Ai-Hong Ma, Guru P. Sonpavde, Fan Cheng, Chong-xian Pan. Preclinical Models for Bladder Cancer Research. Hematology/Oncology Clinics of North America 2021, 35 (3) , 613-632. https://doi.org/10.1016/j.hoc.2021.02.007
    58. Thafar Almela, Lobat Tayebi, Keyvan Moharamzadeh. 3D bioprinting for in vitro models of oral cancer: Toward development and validation. Bioprinting 2021, 22 , e00132. https://doi.org/10.1016/j.bprint.2021.e00132
    59. Danielle Warren, Eva Tomaskovic-Crook, Gordon G. Wallace, Jeremy M. Crook. Engineering in vitro human neural tissue analogs by 3D bioprinting and electrostimulation. APL Bioengineering 2021, 5 (2) https://doi.org/10.1063/5.0032196
    60. Moyuan Qu, Canran Wang, Xingwu Zhou, Alberto Libanori, Xing Jiang, Weizhe Xu, Songsong Zhu, Qianming Chen, Wujin Sun, Ali Khademhosseini. Multi‐Dimensional Printing for Bone Tissue Engineering. Advanced Healthcare Materials 2021, 10 (11) , 2001986. https://doi.org/10.1002/adhm.202001986
    61. Gastón A. Primo, Alvaro Mata. 3D Patterning within Hydrogels for the Recreation of Functional Biological Environments. Advanced Functional Materials 2021, 31 (16) https://doi.org/10.1002/adfm.202009574
    62. Paula I.P. Soares, Joana Romão, Ricardo Matos, Jorge Carvalho Silva, João Paulo Borges. Design and engineering of magneto-responsive devices for cancer theranostics: Nano to macro perspective. Progress in Materials Science 2021, 116 , 100742. https://doi.org/10.1016/j.pmatsci.2020.100742
    63. Giada Bassi, Maria Aurora Grimaudo, Silvia Panseri, Monica Montesi. Advanced Multi-Dimensional Cellular Models as Emerging Reality to Reproduce In Vitro the Human Body Complexity. International Journal of Molecular Sciences 2021, 22 (3) , 1195. https://doi.org/10.3390/ijms22031195
    64. Shaohui Zhang, Xiang Duan, Chuan Li, Ming Liang. Pre-classified reservoir computing for the fault diagnosis of 3D printers. Mechanical Systems and Signal Processing 2021, 146 , 106961. https://doi.org/10.1016/j.ymssp.2020.106961
    65. Maria P. Nikolova, K. Karthik, Murthy S. Chavali. Nanofunctionalized 3D printing. 2021, 457-504. https://doi.org/10.1016/B978-0-12-818411-0.00006-9
    66. Qingzhen Yang, Xuemeng Lv, Bin Gao, Yuan Ji, Feng Xu. Mechanics of hydrogel-based bioprinting: From 3D to 4D. 2021, 285-318. https://doi.org/10.1016/bs.aams.2021.03.001
    67. Qinhong Wei, Hangjie Li, Guoguo Liu, Yingluo He, Yang Wang, Yen Ee Tan, Ding Wang, Xiaobo Peng, Guohui Yang, Noritatsu Tsubaki. Metal 3D printing technology for functional integration of catalytic system. Nature Communications 2020, 11 (1) https://doi.org/10.1038/s41467-020-17941-8
    68. Pallab Datta, Madhuri Dey, Zaman Ataie, Derya Unutmaz, Ibrahim T. Ozbolat. 3D bioprinting for reconstituting the cancer microenvironment. npj Precision Oncology 2020, 4 (1) https://doi.org/10.1038/s41698-020-0121-2
    69. Raphaël F. Canadas, Pedro Patrício, Virginia Brancato, Luca Gasperini, David Caballero, Ricardo A. Pires, João B. Costa, Hélder Pereira, Ping Yong, Lucília P. da Silva, Jie Chen, Subhas C. Kundu, Nuno A.M. Araújo, Rui L. Reis, Alexandra P. Marques, Joaquim M. Oliveira. Convection patterns gradients of non-living and living micro-entities in hydrogels. Applied Materials Today 2020, 21 , 100859. https://doi.org/10.1016/j.apmt.2020.100859
    70. Mojtaba Falahati, Parvaneh Ahmadvand, Shahriar Safaee, Yu-Chung Chang, Zhaoyuan Lyu, Roland Chen, Lei Li, Yuehe Lin. Smart polymers and nanocomposites for 3D and 4D printing. Materials Today 2020, 40 , 215-245. https://doi.org/10.1016/j.mattod.2020.06.001
    71. Harald Rupp, Wolfgang H. Binder. 3D Printing of Core–Shell Capsule Composites for Post‐Reactive and Damage Sensing Applications. Advanced Materials Technologies 2020, 5 (11) https://doi.org/10.1002/admt.202000509
    72. Shuangshuang Mao, Yuan Pang, Tiankun Liu, Yongchun Shao, Jianyu He, Huayu Yang, Yilei Mao, Wei Sun. Bioprinting of in vitro tumor models for personalized cancer treatment: a review. Biofabrication 2020, 12 (4) , 042001. https://doi.org/10.1088/1758-5090/ab97c0
    73. Zhen Jiang, Broden Diggle, Ming Li Tan, Jekaterina Viktorova, Christopher W Bennett, Luke A. Connal. Extrusion 3D Printing of Polymeric Materials with Advanced Properties. Advanced Science 2020, 7 (17) , 2001379. https://doi.org/10.1002/advs.202001379
    74. Fan Zhang, Martin W. King. Biodegradable Polymers as the Pivotal Player in the Design of Tissue Engineering Scaffolds. Advanced Healthcare Materials 2020, 9 (13) https://doi.org/10.1002/adhm.201901358
    75. Hing Jii Mea, Luis Delgadillo, Jiandi Wan. On-demand modulation of 3D-printed elastomers using programmable droplet inclusions. Proceedings of the National Academy of Sciences 2020, 117 (26) , 14790-14797. https://doi.org/10.1073/pnas.1917289117
    76. Hui Wang, Haitao Liu, Fan He, Wenwen Chen, Xu Zhang, Mengqian Zhao, Li Wang, Jianhua Qin. Flexible Generation of Multi‐Aqueous Core Hydrogel Capsules Using Microfluidic Aqueous Two‐Phase System. Advanced Materials Technologies 2020, 5 (6) https://doi.org/10.1002/admt.202000045
    77. Yu. A. Satskaya, S. A. Sotnik, D. A. Lagoshnyak, S. V. Kolotilov. Compositions Based on Microporous Coordination Polymers for the Formation of Arbitrarily Shaped 3D Objects. Russian Journal of Coordination Chemistry 2020, 46 (5) , 350-354. https://doi.org/10.1134/S1070328420050061
    78. Hiroyuki Tetsuka, Su Ryon Shin. Materials and technical innovations in 3D printing in biomedical applications. Journal of Materials Chemistry B 2020, 8 (15) , 2930-2950. https://doi.org/10.1039/D0TB00034E
    79. Elia A. Guzzi, Mark W. Tibbitt. Additive Manufacturing of Precision Biomaterials. Advanced Materials 2020, 32 (13) https://doi.org/10.1002/adma.201901994
    80. Margaret E. Prendergast, Jason A. Burdick. Recent Advances in Enabling Technologies in 3D Printing for Precision Medicine. Advanced Materials 2020, 32 (13) https://doi.org/10.1002/adma.201902516
    81. Brian Elder, Rajan Neupane, Eric Tokita, Udayan Ghosh, Samuel Hales, Yong Lin Kong. Nanomaterial Patterning in 3D Printing. Advanced Materials 2020, 32 (17) https://doi.org/10.1002/adma.201907142
    82. Yuanfang Zhang, Wei Fang, Yichun Zhao, Zhihong Liu, Shaoyun Chen, Chenlong Hu, Jiyan Liu, Xueqing Liu. Electric field‐driven preparation of elastomer/plastic nanoparticles gradient films with enhanced damping property. Journal of Applied Polymer Science 2020, 137 (8) https://doi.org/10.1002/app.48401
    83. Aqib Muzaffar, M. Basheer Ahamed, Kalim Deshmukh, Tomáš Kovářík, Tomáš Křenek, S. K. Khadheer Pasha. 3D and 4D printing of pH-responsive and functional polymers and their composites. 2020, 85-117. https://doi.org/10.1016/B978-0-12-816805-9.00004-1
    84. Alexander P. Haring, Blake N. Johnson. Brain-on-a-chip systems for modeling disease pathogenesis. 2020, 215-232. https://doi.org/10.1016/B978-0-12-817202-5.00006-1
    85. David Caballero, Rui L. Reis, Subhas C. Kundu. Trends in biomaterials for three-dimensional cancer modeling. 2020, 3-41. https://doi.org/10.1016/B978-0-12-818128-7.00001-0
    86. Matthew L. Bedell, Jason L. Guo, Virginia Y. Xie, Adam M. Navara, Antonios G. Mikos. Polymer scaffold fabrication. 2020, 295-315. https://doi.org/10.1016/B978-0-12-818422-6.00018-6
    87. Daeha Joung, Nicolas S. Lavoie, Shuang‐Zhuang Guo, Sung Hyun Park, Ann M. Parr, Michael C. McAlpine. 3D Printed Neural Regeneration Devices. Advanced Functional Materials 2020, 30 (1) https://doi.org/10.1002/adfm.201906237
    88. Alexander P. Haring, Emily G. Thompson, Raymundo D. Hernandez, Sahil Laheri, Megan E. Harrigan, Taylor Lear, Harald Sontheimer, Blake N. Johnson. 3D Printed Multiplexed Competitive Migration Assays with Spatially Programmable Release Sources. Advanced Biosystems 2020, 4 (1) https://doi.org/10.1002/adbi.201900225
    89. Sidonie Aubert, Marine Bezagu, Alan C. Spivey, Stellios Arseniyadis. Spatial and temporal control of chemical processes. Nature Reviews Chemistry 2019, 3 (12) , 706-722. https://doi.org/10.1038/s41570-019-0139-6
    90. Chong Li, Jiancheng Wang, Yiguang Wang, Huile Gao, Gang Wei, Yongzhuo Huang, Haijun Yu, Yong Gan, Yongjun Wang, Lin Mei, Huabing Chen, Haiyan Hu, Zhiping Zhang, Yiguang Jin. Recent progress in drug delivery. Acta Pharmaceutica Sinica B 2019, 9 (6) , 1145-1162. https://doi.org/10.1016/j.apsb.2019.08.003
    91. Kota Inohara, Shusaku Asano, Taisuke Maki, Kazuhiro Mae. Synthesis of Small Lipid Nanoparticles Using an Inkjet Mixing System Aiming to Reduce Drug Loss. Chemical Engineering & Technology 2019, 42 (10) , 2061-2066. https://doi.org/10.1002/ceat.201900041
    92. Yuan Siang Lui, Wan Ting Sow, Lay Poh Tan, Yunlong Wu, Yuekun Lai, Huaqiong Li. 4D printing and stimuli-responsive materials in biomedical aspects. Acta Biomaterialia 2019, 92 , 19-36. https://doi.org/10.1016/j.actbio.2019.05.005
    93. Arman Naderi, Nirveek Bhattacharjee, Albert Folch. Digital Manufacturing for Microfluidics. Annual Review of Biomedical Engineering 2019, 21 (1) , 325-364. https://doi.org/10.1146/annurev-bioeng-092618-020341
    94. Yuxin Tong, Ezgi Kucukdeger, Justin Halper, Ellen Cesewski, Elena Karakozoff, Alexander P. Haring, David McIlvain, Manjot Singh, Nikita Khandelwal, Alex Meholic, Sahil Laheri, Akshay Sharma, Blake N. Johnson, . Low-cost sensor-integrated 3D-printed personalized prosthetic hands for children with amniotic band syndrome: A case study in sensing pressure distribution on an anatomical human-machine interface (AHMI) using 3D-printed conformal electrode arrays. PLOS ONE 2019, 14 (3) , e0214120. https://doi.org/10.1371/journal.pone.0214120
    95. Ankit Jain, Kuldeep K. Bansal, Ankita Tiwari, Ari Rosling, Jessica M. Rosenholm. Role of Polymers in 3D Printing Technology for Drug Delivery - An Overview. Current Pharmaceutical Design 2019, 24 (42) , 4979-4990. https://doi.org/10.2174/1381612825666181226160040
    96. Fanben Meng, Carolyn M. Meyer, Daeha Joung, Daniel A. Vallera, Michael C. McAlpine, Angela Panoskaltsis‐Mortari. 3D Bioprinted In Vitro Metastatic Models via Reconstruction of Tumor Microenvironments. Advanced Materials 2019, 31 (10) https://doi.org/10.1002/adma.201806899
    97. Wanting Dai, Huilong Guo, Bo Gao, Miaoliang Ruan, Lanqin Xu, Jianping Wu, Thomas Brett Kirk, Jiake Xu, Dong Ma, Wei Xue. Double network shape memory hydrogels activated by near-infrared with high mechanical toughness, nontoxicity, and 3D printability. Chemical Engineering Journal 2019, 356 , 934-949. https://doi.org/10.1016/j.cej.2018.09.078
    98. A. Sydney Gladman, Manuel Garcia-Leiner, Alexis F. Sauer-Budge, . Emerging polymeric materials in additive manufacturing for use in biomedical applications. AIMS Bioengineering 2019, 6 (1) , 1-20. https://doi.org/10.3934/bioeng.2019.1.1
    99. Guillaume Bouguéon, Tina Kauss, Bérangère Dessane, Philippe Barthélémy, Sylvie Crauste-Manciet. Micro- and nano-formulations for bioprinting and additive manufacturing. Drug Discovery Today 2019, 24 (1) , 163-178. https://doi.org/10.1016/j.drudis.2018.10.013
    100. Sean M. Bittner, Jason L. Guo, Antonios G. Mikos. Spatiotemporal control of growth factors in three-dimensional printed scaffolds. Bioprinting 2018, 12 , e00032. https://doi.org/10.1016/j.bprint.2018.e00032
    Load all citations

    Pair your accounts.

    Export articles to Mendeley

    Get article recommendations from ACS based on references in your Mendeley library.

    Pair your accounts.

    Export articles to Mendeley

    Get article recommendations from ACS based on references in your Mendeley library.

    You’ve supercharged your research process with ACS and Mendeley!

    STEP 1:
    Click to create an ACS ID

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    Please note: If you switch to a different device, you may be asked to login again with only your ACS ID.

    MENDELEY PAIRING EXPIRED
    Your Mendeley pairing has expired. Please reconnect