PhenTAA: A Redox-Active N4-Macrocyclic Ligand Featuring Donor and Acceptor Moieties

Here, we present the development and characterization of the novel PhenTAA macrocycle as well as a series of [Ni(R2PhenTAA)]n complexes featuring two sites for ligand-centered redox-activity. These differ in the substituent R (R = H, Me, or Ph) and overall charge of the complex n (n = −2, −1, 0, +1, or +2). Electrochemical and spectroscopic techniques (CV, UV/vis–SEC, X-band EPR) reveal that all redox events of the [Ni(R2PhenTAA)] complexes are ligand-based, with accessible ligand charges of −2, −1, 0, +1, and +2. The o-phenylenediamide (OPD) group functions as the electron donor, while the imine moieties act as electron acceptors. The flanking o-aminobenzaldimine groups delocalize spin density in both the oxidized and reduced ligand states. The reduced complexes have different stabilities depending on the substituent R. For R = H, dimerization occurs upon reduction, whereas for R = Me/Ph, the reduced imine groups are stabilized. This also gives electrochemical access to a [Ni(R2PhenTAA)]2– species. DFT and TD–DFT calculations corroborate these findings and further illustrate the unique donor–acceptor properties of the respective OPD and imine moieties. The novel [Ni(R2PhenTAA)] complexes exhibit up to five different ligand-based oxidation states and are electrochemically stable in a range from −2.4 to +1.8 V for the Me/Ph complexes (vs Fc/Fc+).


■ INTRODUCTION
The release and storage of electrons are intrinsic to many metalloenzymatic transformations. 1 The prevalence of first row transition metals in such enzymes is often accompanied by redox-active ligands to impart multielectron reactivity. 2 Inspired by nature, redox-active ligands have gained a significant foothold in inorganic chemistry, 3 catalysis, 3 and material sciences. 4Among numerous applications, the ability and application of redox-active ligands to function as redox shuttles have allowed the synthesis of first-row transition metal complexes featuring redox-active ligands to exhibit "noblemetal like" reactivity. 5The unique redox properties of these ligands, coupled with their high degree of synthetic versatility, allow for unexplored stoichiometric and catalytic reactivities.3e Consequently, the development of new redox-active scaffolds receives considerable interest.Popular motifs are orthosubstituted heteroaromatic systems 5 (i.e., catechol, aminophenol, or o-phenylenediamine) and delocalized π-systems (i.e., diimines). 6Metal complexes bearing such building blocks can exhibit several ligand-based redox events, originating from the gain (or loss) of an electron onto (or from) the heteroaromatic system.
For instance, o-phenylenediamine initially experiences a 1e − oxidation to the radical o-diiminosemiquinone, followed by another 1e − oxidation to the fully oxidized benzoiminoquinone (Figure 1A).These ortho-substituted heteroaromatic systems are often employed as dianionic donor moieties, whereas πsystems are used as acceptor sites (Figure 1A). 5,6While examples of such motifs in multidentate ligands are abundant, examples of conjugated, redox-active macrocycles are not, despite the coordinating power imparted by the macrocyclic effect. 7This phenomenon enhances the stability of metal complexes, 7 with the macrocyclic conjugation further stabilizing the buildup of charge and/or spin density. 8Nevertheless, a few examples of macrocyclic redox-active ligands have been reported thus far.A prominent group of conjugated macrocyclic ligands is the porphyrinoid family, consisting primarily of aromatic porphyrins 9 and corroles, 10 alongside antiaromatic norcorrole 11 ligands (Figure 1B).Electrochemical investigations revealed that these porphyrinoid ligands can access both multiply reduced and oxidized forms, especially for the antiaromatic norcorrole. 11However, the structural dependency of global (anti)aromaticity for these macrocycles also limits their synthetic versatility.Therefore, we were interested in developing a conjugated macrocyclic ligand platform that derives its redox-active capability from independent moieties, in order to deviate from the reliance on a global (anti)aromatic electronic structure.The combination of independent redoxactive groups within an overall conjugated macrocyclic structure should give rise to a unique electronic structure that features greater synthetic flexibility.We envision that the development of such a versatile platform can contribute to new modes of reactivity in catalysis, 3 development of functional materials (i.e., redox-flow batteries 12 ), and replacement of expensive noble-metal driven processes. 5Based on the aforementioned ortho-substituted heteroaromatic systems as electron donors and conjugated π-systems as electron acceptors, we report the synthesis of the novel conjugated macrocyclic tetraphenylene [b,e,i,m] [1,4,8,11]tetraaza [14]annulene, H 2 (R 2 PhenTAA), featuring a diaryl-o-phenylenediamine donor and an o-diiminophenylene acceptor moiety (Figure 1C).Nickel was employed as the first-row transition metal of choice, as the anticipated square planar Ni(II)complexes are bereft of (readily accessible) metal-centered redox events. 13Additionally, the R-group at the imino group C-terminus was varied to probe the redox properties and/or stability of these Ni complexes.Through a combination of spectroscopic and electrochemical techniques (CV, spectroelectrochemical UV/vis, EPR) and computational methods (DFT), we characterized the redox properties of the various [Ni(R 2 PhenTAA)] complexes and determined whether redox events are either metal-or ligand-centered.

Synthesis of Ligands and Nickel Complexes. [Ni-(R 2
PhenTAA)] complexes were synthesized via a gramscalable divergent synthetic approach (Scheme 1).For the archetypical R = H, the starting point was the commercially available o-nitrobenzaldehyde, which was reduced to oaminobenzaldehyde (1a) with iron powder according to a literature procedure. 14To prevent self-condensation, 1a was used immediately in the next step.Compounds 2a−c (R = H, Me, Ph, respectively) were synthesized using an Ullmann− Goldberg cross-coupling reaction between o-diiodobenzene and 1a−c (1b−c are commercially available starting materials) via a modified literature procedure. 15Condensation of ophenylenediamine with dicarbonyl synthons 2a−c required a different route, depending on the R-group desired.For R = H, condensation of 2a with o-phenylenediamine in combination with a stoichiometric amount of Zn(OAc)      O at reflux in DMF, with subsequent crystallization/precipitation affording complexes 4a and 4b in 88% and 90% yields, respectively.All attempts to obtain 3c proved unsuccessful, rationalized by the steric bulk imparted by the additional phenyl group in the benzophenone moiety.Therefore, a direct route toward [Ni(Ph 2 PhenTAA)] was employed, using nickel as a template for square-planar complex formation. 16 Single crystal X-ray diffraction (SC−XRD) studies (Figure 2A and B) showed that these macrocyclic structures have a d i s t i n c t s a d d l e -s h a p e d g e o m e t r y , a k i n t o t h e tetramethyltetra [14]azaannulene macrocycle. 17Bond length analysis revealed a distinct deviation from the reference standard benzene for the o-aminobenzaldimine phenyl rings 2 and 3 (Table S2, Supporting Information).The C−N and C Ar −C imine bonds have significant double-bond character, whereas the adjacent C Ar −C Ar are lengthened with respect to benzene.This suggests significant delocalization across the oaminobenzaldimine moiety (Figure 2C).
Characterization of the Nickel Complexes.Upon metalation of 3a, the distinct signal of the NH hydrogens at δ = 12.20 ppm in 1 H NMR disappears, indicative of successful metalation.The imine (δ = 8.04 vs 8.73 ppm for 4a vs 3a, respectively) and Ar−H signals (see Supporting Information, pages 60 and 65) experience a significant upfield shift.2D-NMR and mass spectrometry further support the composition of the expected complex.The diamagnetic nature of the complex (as per its NMR spectra) indicates that the complex does not possess an open-shell character, congruent with a square planar d 8 geometry. 18UV/vis spectroscopy on the intensely dark-purple complex revealed the appearance of two new broad visible wavelength absorptions at 497 and 627 nm.

Inorganic Chemistry
The UV absorption at 282 nm of 3a experienced a red-shift to 301 nm for 4a, with the bands at 307 nm and 394 nm disappearing completely for 4a.In situ ATR−FT−IR spectroscopy on the complex (suspended in C 6 H 6 solution) reveals a shift of the characteristic C�N and o-aminobenzaldimine stretching modes between 3a (1587 and 1446 cm −1 ) and 4a (1573 and 1457 cm −1 ).Notably, the disappearance of the free N−H stretching band at 1638 cm −1 is consistent with metalation.SC−XRD confirmed the expected square-planar geometry of 4a, adopting a half-saddle shape, with the odiiminophenylene moiety aligned with the two o-aminobenzaldimine moieties (Figure 3).This is in stark contrast to 3a, which featured a distinct saddle-shaped geometry.The increase in planarity upon metalation rationalizes the 10-fold decrease in solubility of 4a compared to 3a (1 vs 10 mg mL −1 in C 6 H 6 , respectively).Nickel complexes 4b−c exhibit comparable NMR spectra.These NMR spectra, together with mass spectrometry, confirmed their composition and structure.Interestingly, the o-Ar−H hydrogens of the odiiminophenylene moiety in 4c appear significantly upfield shifted (δ = 5.70 ppm).SC−XRD studies support the explanation that this shift is due to the strong interactions between pendant phenyl rings that are in close proximity, arising from the rigid geometry of the complex (Figure 3).Geometrical differences between 4a and 4c are apparent from SC−XRD studies.While 4a adopts a half-saddle shape and stacks in an antisymmetric fashion, 4c displays a full saddleshape due to steric hindrance of the additional phenyl rings that suppress planarity (∠centroid(C1−C10)-metal-centroid (C5−C6) < 180°).
This hindrance also suppresses π−π stacking, leading to a 10-fold solubility increase for 4c compared to 4a (10 vs 1 mg mL −1 in C 6 H 6 , respectively).Comparison of the UV/vis spectra reveals a strikingly similar pattern for all three nickel complexes.Four main features can be identified (labeled I, II, III, and IV) (Figure 4).The largest difference is observed for the longest wavelength band at 627, 667, and 660 nm for 4a− c, respectively.The presence of the additional phenyl rings for 4c leads to the emergence of additional shoulders at 323 and 369 nm and a visible absorption at 533 nm.
Computational Investigations.The design of the R 2 PhenTAA scaffold is based on the redox-active o-diarylphenylenediamine donor and o-diiminophenylene acceptor moieties.Consequently, we expect that the overall ligand is also redox-active and can be oxidized twice or reduced twice (Scheme 2).As a first elaboration into this chemistry, we turned to density functional theory calculations to ascertain structural and spin state changes upon oxidation/reduction as well as the spin density and overall electronic structure of the R 2 PhenTAA complexes.Calculations were performed using the Karlsruhe def2-TZVP basis sets using the TURBOMOLE 7.4.1.package (see Supporting Information, pages 77−85 and pages 133−139).To rule out any bias from the functional on the spin state of the complexes, all structures were calculated using the GGA BP86, the meta-GGA M06-L, and the hybrid B3LYP functionals.All three variants (R = H, Me, and Ph or 4a−c) were calculated in five different oxidation states (−2, −1, 0, +1, and +2).For integer spin systems, the closed-shell singlet (CSS), open-shell singlet (OSS), and triplet and quintet spin states were calculated.For noninteger spin states, the doublet, quartet, and sextet spin states were calculated.To include any implicit solvent effects that may be present during experimental conditions, all electronic structures were evaluated using single-point calculations with the conductorlike screening model (COSMO).As solvents, MeTHF (ε = 6.97) and MeCN (ε = 38.8)were chosen as these were the most apolar and polar used in X-band EPR measurements (vide infra).The results are displayed in the Supporting Information, Tables S12−S17.The calculated bond distances, angles, and overall geometry are in excellent agreement with experimental SC−XRD results for the neutral complexes.All three functionals (BP86, M06-L, B3LYP) yielded identical prediction of the ground spin state with the exception of the doubly reduced 4a 2− , for which B3LYP predicts an open-shell singlet (OSS) ground state.For all other complexes, the ground state was always the lowest possible spin state (i.e., closed-shell S = 0 or doublet S = 1/2) for 4a−c and their five oxidation states (−2 to +2).Spin density plots (Table S44, Supporting Information) reveal a similar pattern for all three nickel complexes, indicating that the overall redox properties arise as a result of the unique R 2 PhenTAA scaffold.
As such, for clarity, only the data for [Ni(Me 2 PhenTAA)] is displayed from here on (Figure 5, vide infra).Upon single electron oxidation, significant spin density develops at the diaryl-o-phenylenediamine moiety, centered largely on the two nitrogen atoms as well as the central phenyl ring.A small amount of spin density (∼10%) is also present on the filled Ni(d xy ) orbital.Upon single electron reduction, the opposite occurs, and spin density develops on the α-imino carbon and the neighboring phenyl rings.In contrast to the oxidized forms, reduction leads to some spin density in nearly empty Ni(d x2-y2 ) orbital (∼13%).Interestingly, the resonance pattern on the oaminobenzaldimine moiety is opposite to that obtained upon oxidation, where the α-spin density follows an alternating pattern.This suggests that the peripheral o-aminobenzaldimine phenylene rings have a stabilizing function and delocalize spin density for both the oxidized and reduced forms.Additionally, the reduced 4c 1− exhibits spin density on the pendant phenyl rings as well (Table S44, Supporting Information).
TD-DFT Calculations of Neutral Ni Complexes.Timedependent density functional theory calculations were performed at the B3LYP/def2-TZVPP level of theory with the Tamm−Damcoff approximation using the ORCA 4.2.1 software package.The CPCMC solvation model was used in accordance with experimentally used solvents for UV/vis−SEC monitoring (vide infra) (CH 2 Cl 2 for oxidized species; THF for reduced species) (see Supporting Information, pages 86−132).A frontier orbital and Loẅdin population analysis for 4a−c revealed a significant amount of ligand orbitals in between the Feature III predominantly conforms to the HOMO → LUMO+1 excitation, and feature IV conforms to the HOMO → LUMO and HOMO−1 → LUMO excitations.As is evident from the MO scheme in Figure 6, the excitations for features III−IV correspond to excitations from the donor diaryl-ophenylenediamine moiety to the acceptor diimino moiety (Figure 7), revealing a unique donor → acceptor relationship for the R 2 PhenTAA macrocycle.These computational findings  show much promise for the potential redox-active nature of the R 2 PhenTAA scaffold.
Electrochemical Studies.Having studied the [Ni-(R 2 PhenTAA)] complexes computationally, we sought to corroborate the results experimentally via cyclic voltammetry (CV).To study any solvent effects and have a large voltaic window, measurements were conducted in CH 2 Cl 2 and THF (Figure 8).The values for every redox event are noted in Table 1 (vs Fc/Fc + ).The three complexes 4a−c exhibit comparable voltammograms in CH 2 Cl 2 and THF, and the oxidative Based on CV due to overlap of solvent oxidation/reduction. b Voltages reported versus Fc/Fc + .

Inorganic Chemistry
stability of CH 2 Cl 2 and reductive stability of THF allow us to scan an electrochemical window from −2.4 V to +1.8 V (vs Fc/Fc + ).When scanning to positive voltages, two electrochemically reversible waves are observed.These are assigned to ligand-based redox events. 19ased on related nickel o-phenylenediamine complexes, 13 these are assigned to the o-diiminosemiquinone and benzoiminoquinone forms, respectively (Scheme 2).For 4b− c, a third oxidative wave is detected in CH 2 Cl 2 at high positive voltages (+1.3−1.6 V).Based on literature reports, this wave is assigned to the Ni(II)/Ni(III) redox couple. 19The Ni(II)/ Ni(III) wave was absent for 4a since at these voltages, significant degradation occurred at the working electrode.
A different picture arises when scanning to negative voltages.For the archetypical [Ni(H 2 PhenTAA)] (4a) complex, an electrochemically irreversible event is detected at −1.9 V, with a large peak separation of 770 mV at a 200 mV s −1 scan rate.Increasing the scan rate led to more narrow peak separation, indicative of an EC mechanism, i.e., reversible electron transfer followed by a reversible chemical step. 20As shown computationally (vide supra), this is most likely a ligand-centered reduction of the α-iminocarbon.The electrochemically irreversible nature is proposedly due to reversible chemical dimerization of the two ligand radical species (Figure 9), as this is also observed for [Ni(Salphen)] complexes. 21oreover, a metal-centered Ni(II)/Ni(I) redox couple is excluded on the basis of literature reports, as these tend to occur at even more negative voltages. 19,22The ketimine based complexes (R = Me/Ph) 4b−c exhibit contrasting electrochemical properties, featuring a fully electrochemically reversible reduction.This behavior is consistent with the hypothesis of dimerization occurring at the α-imino carbon, as the electrogenerated radical experiences enhanced steric and electronic stability at this carbon (Figure 9).Cyclic voltammetry on 4b−c in THF was possible down to −2.4 V vs Fc/Fc + , revealing another reduction at −2.16 V (4b) and −2.25 V (4c).This additional wave is not electrochemically reversible and gives rise to an additional, smaller wave at −0.33 V (4b) and −0.47 V (4c).At higher scan rates, the cathodic current of this second reduction increases relatively to the anodic current, and an EC mechanism is assigned to this redox event.Based on computational data, this is assigned to a second ligand-based reduction of the remaining imine position to yield a tetraanionic R 2 PhenTAA ligand (Scheme 2).
Spectroelectrochemistry. UV/vis-spectroelectrochemical measurements (UV/vis−SEC) were performed to gather more information on the redox chemistry of nickel complexes 4a−c and to assign the ligand/metal oxidation states.The spectral changes are listed in Table S6 and visualized in Figure 10.At 0 V (vs Ag wire), all species revealed the same spectrum as with the cell turned off in both THF and CH 2 Cl 2 .This confirms that the CV assignments with respect to reduction or oxidation are correct.Overall, the UV/vis−SEC measurements corroborate the results observed with CV with four different detectable species for 4a (one reduced and two oxidized species) and five for 4b−c (two reduced and two oxidized species).The most discernible spectral changes occur upon the first oxidation or reduction for all three complexes, with the second oxidation or reduction resulting in only minor spectral perturbations.This suggests that departure from the dianonic form of the R 2 PhenTAA macrocycle induces the strongest change in the overall excitations, which applies to both reduction and oxidation of the ligand.This observation is in line with the results of the TD−DFT calculations, which indicate that the electronic excitations are dominated by donation from the diaryl-o-phenylenediamine moiety to the  acceptor diimino moiety.The first oxidation of the donor moiety (or reduction of the acceptor) is expected to strongly perturb the intramolecular donor → acceptor process, manifested by dramatic changes in the UV/vis spectrum.Additional oxidation or reduction leads to a further departure from the already disturbed donor → acceptor relationship, giving rise to a minor change to the overall spectrum.Reduction of the Ni complexes produces a clear difference for 4a vs 4b−c, in line with CV measurements.Going from 4a to (4a 1− ) 2 (see Figure 10), two main features for 4a (III and IV) broaden into several large features at 519, 579, and 733 nm with III.For 4b−c, features III and IV only slightly shift to longer wavelengths but do not broaden as much.Therefore, these two features are likely strongly affected by changes on the α-iminocarbon.
In line with with TD−DFT calculations, these features III and IV match excitations from the donor diaryl-o-phenylenediamine moiety to the acceptor diimino moiety and reduction of the diimino moiety is expected to strongly affect such excitations.Upon oxidation, the three complexes all gain a new broad feature at around 360 nm (feature V) that is present for both the singly and doubly oxidized complexes.For the defining features III and IV, a distinct difference between 4a and 4b−c is again present.For the first oxidation, feature III sharpens and is red-shifted for 4a, whereas for 4b−c, it decreases in intensity but does not shift.Feature IV collapses into the baseline for 4a but is broadened and blue-shifted for 4b−c.For the second oxidation to the benzoiminoquinone state, both features III and IV collapse almost entirely into the baseline for all three complexes.This spectral difference between 4a and 4b−c is attributed to the geometric difference of the complexes as per XRD of the neutral complexes and DFT studies of the reduced and oxidized complexes (vide supra).The collapse of features III and IV for all three complexes in their doubly oxidized form can be attributed to the absence of electrons in the HOMO of the neutral parent complexes.
TD−DFT Calculations of the Oxidized and Reduced Ni Complexes.To acquire more insight into these spectral changes and correlate them to the proposed computed states, TD−DFT calculations were performed for all five oxidation states and varying spin states using the same parameters as for the neutral complexes (vide supra).For integer spin states, the closed-shell singlet (CSS), triplet, and quintet states were calculated.For noninteger spin states, the doublet, quartet, and sextet spin states were calculated.In all cases, the best match was obtained for the low-spin states, in line with the ground state DFT calculations.For clarity, the 4b redox series and the orbital transitions are visualized here (Figure 11).The 4a and 4c series can be found in the Supporting Information (pages 90−132).Feature I cannot be assigned to a single, dominant transition and is composed of several excitations for all three complexes in all oxidation states.These often involve excitation from either a very low-lying orbital to the LUMO/LUMO+1 or from the HOMO/HOMO−1 to a high energy vacant orbital.
The other features are highly dependent on the overall ligand oxidation state but are quite similar for all three Ni complexes with the same oxidation state.In both the singly reduced and neutral form, this changes to a transition of the diaryl-o-phenylenediamine site to a global quinoidal structure.In the oxidized forms, feature II primarily consists of a π → π* transition of the diimino moiety.Features III and IV, as with the neutral complexes, correspond largely to excitations within the four frontier orbitals described in Figure 6.Exceptions are the doubly reduced complexes (4b 2− −4c 2− ), because these show excitation from the quinoidal HOMO to higher lying global π* antibonding states.Likewise, the doubly oxidized complexes do not have a defined feature IV, and the still present feature III now reveals a reversed donor → acceptor relationship, with excitations occurring mainly from the diimino moiety to the benzoiminosemiquinone moiety.Feature V, a feature not present for the neutral complexes, but visible for both the reduced and oxidized forms, corresponds mainly to excitations from the acceptor diimino moiety to higher lying π* antibonding states.Changing the oxidation state from −2 to +2 only shifts the starting donor orbital, still centered on the diimino moiety, to a lower energy.X-Band EPR Spectroscopy.Seeking additional experimental evidence for the ligand-based nature of the redox events for R 2 PhenTAA complexes 4a−c, we turned to X-band EPR spectroscopy.Anisotropic spectra recorded in frozen solutions (40−80K) are shown in Figure 12, and the obtained simulated data are reported in Table 2. Isotropic spectra recorded at RT are shown in the Supporting Information (Figures S35−S40).Chemical reductions were performed using 1 eq. of freshly produced sodium anthracenide solution in 2-MeTHF.Chemical oxidation was achieved using 1 eq. of a solution of freshly prepared thianthrenium tetrafluoroborate (ThiBF 4 ) in CH 2 Cl 2 .Reduction of 4a gave a faint and rapidly diminishing signal at RT in 2-MeTHF with a signal at g iso = 2.0026, in line with a transient ligand radical.A follow-up 1 H NMR measurement of this sample revealed the formation of a new diamagnetic species that does not correspond to the neutral complex 4a.This conforms to the hypothesis that upon reduction, the radical 4a 1− dimerizes into a diamagnetic species.Freeze quenching of 4a 1− gave an axial anisotropic spectrum at 80 K void of any hyperfine interactions (HFIs) (g 11 = g 22 = 2.0043; g 33 = 2.1047) (Figure 12).These values correspond to a metastable ligand radical.The g-value at 2.10 suggests spin−orbit coupling involving the SOMO interacting with an empty orbital close in energy.
Reduction of 4b and 4c at RT gave a broad and stable signal at g iso = 2.0223 and g iso = 2.0380, respectively, in line with ligand radical species.Interestingly, the isotropic spectrum of  4b 1− features an apparent large hyperfine interaction with a single (apparently I = 3 / 2 ) nucleus.Due to all hydrogen atoms occurring at least twice (due to symmetry) and because naturally occurring nickel isotopes do not have a nuclear spin, this could only be simulated by including hyperfine coupling with a single 23 Na atom.Apparently, sodium ions introduced together with the reducing agent bind to 4b 1− .Anisotropic spectra were obtained after freeze quenching, and measurement at 80 K revealed a mostly axial spectrum, similar to that of 4a 1− .However, for 4b 1− , the feature at high g-values corresponds to three different species.As with the isotropic room temperature spectrum, this is attributed to various coordination modes of the sodium counterion.Interestingly, this is not observed for 4c 1− , which shows a rhombic spectrum at higher g-value (g 11 = 2.0149; g 22 = 2.0050; g 33 = 2.0868), void of HFIs.For both 4b and 4c, this is in accordance with a ligand radical.Oxidation of 4a−c with ThiBF 4 afforded clean, stable isotropic spectra for all three complexes (4a: g iso = 1.9994; 4b: g iso = 1.9991 and 4c: g iso = 2.0004).Their g-values are again in line with ligand radical species.Addition of a CH 2 Cl 2 solution of ThiBF 4 to an equimolar solution of 4a−c in MeCN, followed by freeze quenching and subsequent measurement with X-band EPR, revealed a slightly rhombic EPR spectrum for 4a 1+ (g 11 = 2.0104; g 22 = 2.0140; g 33 = 1.9789) measured at 40 K.As with reduced 4b 1− , oxidation of 4b to 4b 1+ gave a rhombic spectrum that featured several additional small hyperfine interactions.In line with CV measurements in THF (another coordinating solvent), this is attributed to coordination of the now cationic 4b 1+ with acetonitrile, resulting in several different solvent adducts (Species 1: g 11 = 1.9580; g 22 = 2.0044; g 33 = 2.0148 (weight = 0.50).Species 2: g 11 = 1.9867; g 22 = 2.0153; g 33 = 2.0243 (weight = 0.50) (A 14N1 11 = 32.1603MHz; A 14N1 22 = 0 MHz; A 14N1 33 = 0 MHz) (A 14N2 11 = 25 MHz, A 14N1 22 = 0 MHz, A 14N1 33 = 0 MHz).A similar coordination effect may be present for 4c 1+ , although a rhombic spectrum void of HFIs was obtained (Species 1: g 11 = 1.9855; g 22 = 2.0133; g 33 = 2.0146 (weight = 0.63).Species 2: g 11 = 1.9666; g 22 = 2.0034; g 33 = 2.0036 (weight = 0.37)).These g-values correspond to ligand-centered radicals, analogous to the room-temperature spectra.All the EPR spectra gave signals that correspond to a doublet spin state (S = 1 / 2 ).These findings are in line with the UV/vis−SEC measurements and the computational results from DFT and TD−DFT analysis.

■ CONCLUSIONS
To summarize, we have described the synthesis and characterization of a series of new conjugated macrocycles: R 2 PhenTAA.The imine position has been substituted with either a methyl or phenyl group, and three new [Ni-(R 2 PhenTAA)] complexes were synthesized and characterized (R = H, Me, Ph).Electrochemical studies, using a combination of cyclic voltammetry and spectro-electrochemistry, have revealed the extensive redox chemistry of [Ni(R 2 PhenTAA)].The incorporation of the diaryl-o-phenylenediamine moiety gave rise to two ligand-based oxidation states for all three Ni complexes.Substitution of the imine group with a methyl or phenyl both led to stabilization of the first reduction, preventing dimerization.This allowed further access to a second reduction, giving access to a total of five spectroscopically detectable different ligand-based oxidation states for R 2 PhenTAA that are electrochemically stable over a range of +4.2 V.In all cases, the metal remains in its Ni(II) oxidation state.These findings show that combining two different redoxactive moieties within a single conjugated macrocycle leads to a unique electronic structure that exhibits a clear donor → acceptor dual nature.However, the fundamental nature of the individual redox moieties is still retained, demonstrating that a conjugated redox-active macrocycle is not fully dependent on a globally delocalized nature.Apart from the redox properties of PhenTAA, the donor → acceptor electronic structure also leads to unique photophysical properties, revolving largely around its four frontier ligand orbitals.We anticipate these results will also lead to further development and insights into other ligand-mediated radical group transfer reactions.
■ EXPERIMENTAL SECTION General Considerations.All reactions were carried out under argon using standard Schlenk techniques or under an inert atmosphere in a N 2 -filled glovebox, unless noted otherwise.All chemicals were of commercial grade and used without further purification, unless noted otherwise.All solvents used were predried using either a Solvent Purification System (SPS) from MBraun (MB SPS-800, with standard MBraun drying columns) or were dried and distilled from sodium (PhMe/pentane), sodium/benzophenone (THF/Et 2 O) or CaH 2 (CH 2 Cl 2 , MeOH).All solvents were further dried/stored on activated 3 Å molecular sieves and degassed by sparging with argon unless mentioned otherwise.Additional information regarding NMR, EPR, HRMS, UV/vis, CV, XRD, and spectroelectrochemical measurements can be found in the Supporting Information.
Synthesis and Characterization of Ligands.Synthesis of 2-Aminobenzaldehyde (1a).Compound 1a was prepared according to a modified literature procedure. 14To a 1 L round-bottom flask was added Fe (55.85 g, 1 mol), 2-nitrobenzaldehyde (15.11 g, 0.1 mol), 300 mL of absolute EtOH, and 75 mL of H 2 O.This mixture was bubbled through with Ar for 10 min after which HCl (0.75 mL; 37%) was added.The mixture was brought to reflux under Ar for 14 h.After cooling down, the mixture was filtered over Celite and washed with EtOH.The filtrate was concentrated in vacuo, subsequently extracted with CH 2 Cl 2 /H 2 O, washed with brine, dried with Na 2 SO 4 , filtered over cotton, and evaporated in vacuo until a yellow oil remained.Next, the crude product was purified via column chromatography (CH 2 Cl 2 ).The pure fractions were identified via TLC (1a R F = 0.2) and evaporated in vacuo.Yield: 10 g (83%). 1 S59).
General Procedure A for Dicarbonyl Building Blocks 2a−2c.n-Bu 2 O (200 mL) was filtered over activated basic alumina.To this was added o-diiodobenzene (1 equiv) and amine (2.2 equiv).To a separate 1 L Schlenk flask was added 500 mesh Cu powder (20 mol %), CuI (2 mol %), and K 2 CO 3 (4 equiv).To this Schlenk flask the n-Bu 2 O solution was added, and this mixture was brought to reflux for 6 days.After cooling, the salts were filtered off over a short silica plug and washed with CH 2 Cl 2 until the effluent was colorless, and the solvent was removed in vacuo.The crude mixture was either recrystallized from CH 2 Cl 2 /pentane or purified via column chromatography (CH 2 Cl 2 /petroleum ether (40−60) gradient).
Synthesis of N,N′-(1,2-Phenylenediamino)-bis(2-aminobenzaldehyde) (2a).The reaction was performed according to general procedure A (see above) on a 37.5 mmol scale.The product was isolated after column chromatography (CH 2 Cl 2 /petroleum ether (40−60) gradient).Gradient: 50% CH 2 Cl 2 /PE (fractions 1−30); 75% CH 2 Cl 2 /PE (fractions 31−50); 100% CH 2 Cl 2 /PE (fractions 51−80); 25% EtOAc/75% CH 2 Cl 2 (fractions 81−all color eluted).The first fraction is the monocoupled product (R F = 0.9), the second fraction is compound 2a (R F = 0.6), and the final fraction is the 2aminobenzaldehyde starting material (R F = 0.2).The pure fractions were identified via TLC and evaporated in vacuo.Yield: 6.64 g (56%).S60). 13 S70). 13 Synthesis of H 2 (Me 2 PhenTAA) (3b).Compound 2b (1,75 g, 5,1 mmol), o-phenylenediamine (606 mg, 5,6 mmol), NaHCO 3 (428 mg, 5.1 mmol), and activated 3 Å molecular sieves were added to a 500 mL Schlenk flask.To this mixture was added 150 mL dry and degassed toluene.The mixture was stirred at reflux for 10 days, during which the color gradually changed to dark brown.The salts and molecular sieves were filtered off aerobically over Celite and washed with dichloromethane, and the solvents were removed in vacuo.The residue was recrystallized from CH 2 Cl 2 /pentane at −20 °C for 3 h.The tan-yellow crystalline needles were filtered off and washed with pentane (∼300 mL).Yield: 892 mg (42%). 1 S81). 13 Synthesis and Characterization of Complexes.General Procedure B for the Metalation of Free Bases 3a and 3b.Free base ligand (1 equiv) and Ni(OAc) 2 •4H 2 O (2 equiv) were added to a Schlenk flask.To this mixture was added DMF (40−45 mL).The reaction was brought to reflux under Ar for 16 h, after which the apparatus was connected to the reaction flask under Ar.The mixture was refluxed vigorously for 7 days, after which it was cooled down, and the solvent removed in vacuo.The dark black-purple residue was redissolved in CH 2 Cl 2 /petroleum ether (40/60) (1:1 v/v) and passed over a short silica plug.The first fraction is the product (R F = 0.8 (CH 2 Cl 2 )), the second fraction is compound 2c (R F = 0.3 (CH 2 Cl 2 )), and an unidentified greyish spot remains on the baseline.The first fraction was evaporated in vacuo and recrystallized from CH 2 Cl 2 / MeOH.Yield: 403.5 mg (32%). 1 H NMR (400 MHz, CD 2 Cl 2 ): δ 7.67 (d, 3  Computational Studies.DFT geometry optimizations were performed without simplifications on full atomic models using TURBOMOLE 7.4.1 23 coupled to the PQS Baker optimizer 24 via the BOpt package. 25Unless mentioned otherwise, convergence criteria (scfconv = 7) were used on a m4 grid using Grimme's version 3 zero-damping dispersion correction. 26The multipole accelerated resolution of identity (MARI-J) was used for all TURBOMOLE calculations. 27For a description of the functional and basis sets used, see below.All minima, without imaginary frequencies, were characterized by calculating the analytical Hessian matrix.Energy output generated in Hartree units was converted to kcal•mol −1 by multiplication with 627.51.Grimme's dispersion corrections were added to compensate for the underestimation of metal−ligand interactions from uncorrected DFT calculations.EPR parameters were calculated with the ORCA 4.2.1 28 software package at the B3LYP (ref 29)/ZORA-TZVPP (ref 30) level using the coordinates from the structures optimized in TURBOMOLE as the input.Graphical representations of structures and visualization of orbitals were generated using IboView v20150427. 31Spin density plots were generated using IQMol 2.9.2 (http://iqmol.org/).TD− DFT calculations were performed with the ORCA 4.2.1 28 software package at the B3LYP (ref 29)/def2-TZVPP (ref 30) level of theory with the Tamm-Damcoff approximation. 32Additionally, the CPCMC solvation model was used with CH 2 Cl 2 for neutral and oxidized species (ε = 9.08, refractive index 1.424) and THF for reduced species (ε = 7.25, refractive index 1.407).For each computed spectrum, 100 roots were evaluated.For energetic values, spin densities, and xyz coordinates, see the Supporting Information.

■ ASSOCIATED CONTENT
* sı Supporting Information

Figure 1 .
Figure 1.Examples of popular redox-active donor and acceptor groups and their respective oxidation states (A).Prominent members of the porphyrinoid family that exhibit ligand-based redox activity, dependent on their global (anti)aromatic conjugated nature (B).Novel redox-active scaffold (R 2 PhenTAA) based on the sum of popular redox-active donor/acceptor moieties (this work) (C).Scheme 1. Synthesis of [Ni(R 2 PhenTAA)] Complexes a Subsequently, compound 2c, o-phenylenediamine, and Ni(OAc) 2 •4H 2 O were heated at reflux for 7 days in xylene using a Dean−Stark apparatus.[Ni(Ph 2 PhenTAA)] (4c) was isolated in 32% yield after purification.Characterization of the Free Base Ligands.The new compounds were characterized by 1 H-, 13 C-, and 2D−NMR spectroscopy, HR−ESI−MS (positive mode), and UV/vis spectroscopy.Additionally, 3a was analyzed by in situ ATR− FT−IR and melting point analysis (see Supporting Information, page 8).

Figure 6 .
Figure 6.Molecular orbital diagram for the oxidation states of [Ni(Me 2 PhenTAA)] (4b) calculated with TD−DFT at the B3LYP/def2-TZVPP/ CPCMC (CH 2 Cl 2 ) level of theory using 100 roots.Visualized selected Hartree−Fock orbitals (left) for the neutral 4b form are representative for all other oxidation states.Metal d-orbitals shown in gray (from high-to low-energy: d x2-y2 , d z2 , d yz ≈ d xz , d xy ) and color-coded selected ligand orbitals (L 1 −L 4 ) were assigned via visual inspection and Loẅdin population analysis.

Figure 7 .
Figure 7. Orbitals involved in the predominant excitations for features I−IV (A).Experimental (black) and simulated (red) spectra for complexes 4a−c with features I−IV labeled.The relative energy and oscillator strength of each excitation are represented in red bars and were fitted to the experimental spectra (B).

Figure 8 .
Figure 8. Cyclic voltammograms of complexes 4a−c in CH 2 Cl 2 and THF.Measurements were performed at 200 mV s −1 at room temperature in a 0.1 M TBAPF 6 solution.WE = glassy carbon, CE = Pt wire; RE = Ag/AgCl (3.5 M KCl).All scans were collected within the accessible solvent windows.Potentials are reported vs Fc/Fc + .

Figure 9 .
Figure 9. Schematic overview of the reductive dimerization of 4a at the α-iminocarbon vs steric/electronic stabilization of the radical anionic species for 4b−c.

Figure 10 .
Figure 10.UV/vis spectra obtained via spectroelectrochemical monitoring of reduced (top) Ni complexes 4a−c in THF and oxidized (bottom) in CH 2 Cl 2 with main features I−IV labeled.Intermediate species were determined on the basis of isosbestic points.

Figure 11 .
Figure 11.Most relevant orbitals involved in the five main features for [Ni(Me 2 PhenTAA)] (4b) and oxidation states (−2, −1, 0, +1, +2).Frontier orbitals are labeled L 1 −L 4 as in Figure 6 (A).Table with the most dominant transitions of the 4b redox series per oxidation state and spectral feature (B).Experimental (black) and simulated (red) spectra for 4b and oxidation states (−2, −1, 0, +1, +2) (C, left to right).The relative energy and oscillator strength of each excitation are represented in red bars and were fitted to the experimental spectra.

Table 2 .
Simulated g-Values of Singly Reduced/Oxidized Complexes 4a−c Derived from X-Band EPR Spectroscopy Measurements at 40−80 K