Short, Divergent, and Enantioselective Total Synthesis of Bioactive ent-Pimaranes

We present the first total synthesis of eight ent-pimaranes via a short and enantioselective route (11-16 steps). Key features of the divergent synthesis are a Sharpless asymmetric dihydroxylation, a Brønsted acid catalyzed cationic bicyclization, and a mild Rh-catalyzed arene hydrogenation for rapid access to a late synthetic branching point. From there on, selective functional group manipulations enable the synthesis of ent-pimaranes bearing different modifications in the A- and C-rings.

Pimarane natural products represent a large class of diterpenoids sharing a common 6,6,6-carbocyclic scaffold and exhibit diverse bioactivities including anti-inflammatory and anticancer properties (e.g., natural products 1-5, Scheme 1A). 1 To date, few total syntheses of pimaranes and the closely related isopimaranes (C13 epimer) have been reported, most of which rely either on condensation reactions (e.g., Robinson annulations) or on Diels-Alder cycloadditions to provide the requisite tricyclic architecture. 2 In 1975, van Tamelen disclosed a hallmark synthesis of the isopimarane araucarol (8) involving a unique head-totail/tail-to-head polyene cyclization of racemic carbonate 6 (Scheme 1B). 3 However, the reaction provided tricycle 7 as a mixture of double bond isomers in just 7% yield. To the best of our knowledge, there are only two other total syntheses of pimaranes-one of them by our group-which employ polyene cyclizations to selectively generate the underlying trans-decalin motif. 4 As part of our continuing interest in developing cationic cyclization reactions, we sought to devise a scalable and concise synthetic entry point into the entpimarane natural product family. Within this study, we focused on previously inaccessible ent-pimaranes bearing diverse modifications in the A-and C-rings.
From a structural perspective, the targeted ent-pimaranes feature five to seven stereocenters, two of which are quaternary, and further differ by the oxidation pattern around the eastern and western periphery, rendering adiversity-oriented total synthesis approach highly attractive (Scheme 1C). Retrosynthetically, we envisioned generation of the A-and C-ring oxidation patterns in a few steps via selective functionalization of advanced key intermediate 9.
For the installation of the C13 quaternary center of 9, we identified a substrate-controlled α-alkylation/acylation sequence as the most versatile and strategic bond disconnection. The resulting ketone 10 was anticipated to be accessed through a reductive dearomatization of the structurally simplified tricyclic anisole 11. Enantioselective construction of the requisite 6,6,6-carbocyclic scaffold 11 was envisioned in four steps from commercially available geranyl bromide (14) and 2-methyl anisole (13) involving Sharpless asymmetric dihydroxylation to set the stereochemistry at C3 and a cationic bicyclization of epoxide 12.
Our synthesis commenced with a nucleophilic substitution reaction employing geranyl bromide (14) and the respective benzyl lithium species of 2-methyl anisole (13) to furnish geranyl arene 15 in 80% yield (Scheme 2A). 5 The use of sec-butyllithium along with a slow warm-up from -78 to -20 °C was found to be essential for efficient benzylic lithiation. Subsequent Sharpless asymmetric dihydroxylation employing commercial ligands such as (DHQ) 2 PHAL and (DHQ) 2 AQN gave excellent enantioselectivities (91% ee for (DHQ) 2 PHAL and 93% ee for (DHQ) 2 AQN). 6 However, those reactions suffered from poor regioselectivity and were also plagued by exhaustive dihydroxylation, resulting in low isolated yields for the desired diol 17 (20-25%, see the Supporting Information). Ultimately, we resorted to the use of the "ent"-Corey-Noe-Lin ligand (16), a diastereomer of the more established Corey-Noe-Lin ligand, which has been shown to exhibit high regioselectivities for sterically less encumbered alkenes. 7 Gratifyingly, the use of 16 increased the yield of diol 17 to 65−67% yield while maintaining excellent enantioselectivity (93% ee). The overoxidation was minimized by discontinuing the reaction shortly before complete consumption of alkene 15. Notably, 16 was recovered in 99% yield and was used for up to three cycles without any loss of regio-or enantioselectivity.
With diol 17 in hand, a selective one-pot mono-mesylation of the more accessible secondary alcohol followed by an intramolecular nucleophilic substitution in the presence of potassium carbonate and methanol furnished epoxide 12 in excellent yield (97%). 8 Our screening of the key bicyclization commenced with established literature conditions for similar systems employing a variety of Lewis acids (i.e., SnCl 4 , Et 2 AlCl, EtAlCl 2 , BF 3 ·Et 2 O, Bi(OTf) 3 , InBr 3 , FeCl 3 ). 4d,5a,9 Surprisingly, under these conditions, tricycle 11 10 was only obtained in low yields (0-36% NMR yield, see the Supporting Information) together with significant amounts of oxabicyclo[2.2.1]heptane 19 and a complex mixture of side products. At this point, conditions recently reported by Qu employing tetraphenylphosphonium tetrafluoroborate (Ph 4 PBF 4 ) in combination with 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) attracted our attention. 11 Notably, the authors hypothesized that hydrofluoric acid, formed via the hydrolysis of Ph 4 PBF 4 , catalyzes the further conversion of oxabicyclo[2.2.1]heptanes such as 19 to the fully cyclized products. Unfortunately, applying these conditions to epoxide 12 only resulted in the formation of equimolar amounts of tricycle 11 and 19 (36−37% NMR yield). Based on this result, we set out to screen alternative Brønsted acids in 1,1,1,3,3,3-hexafluoroisopropanol (HFIP). Following careful optimization, methanesulfonic acid was found to efficiently catalyze the conversion of 12 to the desired bicyclization product 11 in 50−58% yield on a decagram scale. In addition, oxabicyclo[2.2.1]heptane 19 (0−7%) and tricycle 18 (10−12%) featuring an axially oriented secondary alcohol were isolated from this reaction. The relative stereochemistry of 11 and 18 was confirmed by single crystal X-ray analysis. After recrystallization from diethyl ether, tricycle 11 was obtained in enantiopure form (>99% ee). We then moved on to investigate reductive dearomatization of the C-ring (Scheme 2B). Initial attempts to employ a Birch reduction protocol using a huge excess of lithium (>600 equiv) 10a,12 resulted in poor yields (<20%) and left us with considerable safety concerns due to the handling of liquid ammonia at −40 °C, close to its boiling point. Notably, Birch reductions of electron-rich anisoles requiring protonation at a site bearing alkyl substituents have been reported as exceptionally challenging. 13 Unfortunately, established methodologies such as a modification by Wilds,14 an electroreduction method developed by Baran, 15 as well as an ammonia-free Birch reduction by Koide 16 failed to deliver the desired products in satisfactory yields. Therefore, we proceeded to investigate alternative reduction protocols. While hydrogenation of structurally related arenes typically requires harsh reaction conditions, 2a,10a,17 we found that exposure of 11 to Rh onalumina under a hydrogen atmosphere (12 bar) in isopropanol (65 °C) allowed for the formation of the corresponding cyclohexane under relatively mild conditions. 18 After removal of isopropanol under reduced pressure, the inseparable mixture of diastereomeric alcohols was directly protected using tert-butyldimethylsilyl trifluoromethanesulfonate (TBSOTf) in the presence of 2,6-lutidine. Several methods for selective methyl ether oxidation to the corresponding ketone 10 were examined (see the Supporting Information). Extensive investigations revealed a combination of calcium hypochlorite and acetic acid in acetone:water (9:1 v/v) as the ideal oxidation method to yield 10 in 72% NMR yield on a 24 μmol scale. 19 Unexpectedly, large scale oxidation (18 mmol) suffered from stalling of the reaction after partial conversion. Therefore, unreacted starting material was recovered and resubjected to the reaction conditions. After three cycles, the ketone 10 was obtained in 56% yield over two steps. Deprotonation of 10 using lithium bis(trimethylsilyl)-amide (LiHMDS) at cryogenic temperatures (−55 to −38 °C) followed by addition of methyl iodide afforded α-methylated epimers 20 and 21 as an inconsequential 1:1 diastereomeric mixture in excellent combined yield (96%). Interestingly, the use of tetrahydrofuran as solvent was essential, as diethyl ether led to undesired double methylation through enolate equilibration (see the Supporting Information). Next, C-acylation of 20 and 21 was investigated via regioselective deprotonation and subsequent trapping of the enolate with Mander's reagent. In accordance with Mander's findings, competitive O-acylation was completely suppressed through the use of diethyl ether instead of tetrahydrofuran and strictly avoiding coordinating agents such as N,N,N',N'-tetramethyl ethylenediamine (TMEDA). 20 Employing only a slight excess of Mander's reagent and performing the acylation at −78 °C was found to be essential to prevent the emergence of side products via cyanohydrin formation. Under optimized conditions, we obtained the β-ketoester 22 in 76% yield. 21 Formation of the potassium enolate of 22 through deprotonation with potassium bis(trimethylsilyl)amide (KHMDS) in tetrahydrofuran (0 °C, 100 min) followed by trapping with phenyl triflimide (PhNTf 2 ) at -78 °C furnished triflate 23 in 86% yield. Subsequent reduction of 23 was best performed employing SPhos Pd G3 catalyst (5 mol %), formic acid, and triethylamine to provide the key intermediate 9 in 92% yield (10-step LLS).
Salient features of our synthetic strategy encompass a scalable and robust four-step sequence allowing access to the tricyclic carbon scaffold through Sharpless asymmetric dihydroxylation in combination with a powerful Brønsted acid catalyzed bicyclization. A mild rhodium catalyzed arene hydrogenation served as an entry to the fully saturated 6,6,6carbocyclic ring systems en route to a late synthetic branching point. Application of the key findings of this study may drive the development of scalable syntheses for other pimaranes and related diterpenoids and are currently underway in our laboratories.

Supplementary Material
Refer to Web version on PubMed Central for supplementary material.