Copper(II), Zinc(II), and Cadmium(II) Formylbenzoate Complexes: Reactivity and Emission Properties

Synthesis, characterization, reactivity, and sensing properties of 4-formylbenzoate complexes of copper(II), zinc(II), and cadmium(II) possessing the 1,10-phenanthroline ancillary ligand are studied. The crystal structures of the (1,10-phenanthroline)bis(4-formylbenzoate)(aqua)copper(II) and (1,10-phenanthroline)bis(4-formylbenzo-ate)zinc(II) and a novel molecular complex comprising an assembly of mononuclear and dinuclear species of (1,10-phenanthroline)bis(4-formylbenzoate)cadmium(II) are reported. These zinc and cadmium complexes are fluorescent; they show differentiable sensitivity to detect three positional isomers of nitroaniline. The mechanism of sensing of nitroanilines by 1,10-phenanthroline and the complexes are studied by fluorescence titrations, photoluminescence decay, and dynamic light scattering. A plausible mechanism showing that 1,10-phenanthroline ligand-based emission quenched by electron transfer from the excited state of 1,10-phenanthroline to nitroaniline is supported by density functional theory calculations. In an anticipation to generate a fluorescent d10-copper(I) formylbenzoate complex by a mild reducing agent such as hydroxylamine hydrochloride for similar sensing of nitroaromatics as that of the d10-zinc and cadmium 4-formylbenzoate complexes, reactivity of d9-copper(II) with hydroxylamine hydrochloride in the presence of 4-formylbenzoic acid and 1,10-phenanthroline is studied. It did not provide the expected copper(I) complex but resulted in stoichiometry-dependent reactions of 4-formylbenzoic acid with hydroxylamine hydrochloride in the presence of copper(II) acetate and 1,10-phenanthroline. Depending on the stoichiometry of reactants, an inclusion complex of bis(1,10-phenanthroline)(chloro)copper(II) chloride with in situ-formed 4-((hydroxyimino)methyl)benzoic acid or copper(II) 4-(hydroxycarbamoyl)benzoate complex was formed. The self-assembly of the inclusion complex has the bis(1,10-phenanthroline)(chloro)copper(II) cation encapsulated in hydrogen-bonded chloride-hydrate assembly with 4-((hydroxyimino)methyl)benzoic acid.


■ INTRODUCTION
Self-assemblies of metal complexes are prospective candidates for optical devices. 1−5 The photoluminescence of small inorganic complexes is an emerging topic of research in the detection of pollutant and hazardous materials. 6−19 Functional modifications on coordinated ligands are used in various inorganic syntheses. 20−24 Such reactions are extended to prepare coordination polymers 25 poly-nuclear complexes, 26−28 rotaxanes, and catenanes. 29−31 Hydrolytic transformations of functional groups are in use to prepare coordination polymers, 32 to modify metallo−organic frameworks 33 and dendrimers. 34,35 The transformations of functional groups of framework structures, polymers, and nano-dimensional materials are of general interest to chemical sciences. 36−39 The functional groups of fluorescent compounds influence detection ability of certain analytes. 40 Some functional groups of metallo−organic frameworks are responsible for sensing volatile organic compounds. For example, aldehyde-containing metallo−organic frameworks are used to detect amines. 41,42 The weak interactions of photoluminescent analytes 6−19 are useful to divulge emission paths. For instance, mechano-responsive self-assemblies of luminescent frameworks are designed by enhancing π−π, C−H···π interactions. 43 Alternatively, the noncovalent interactions of functional groups of a metal complex are utilized to construct second-coordination sphere of metal complexes. 44,45 Photoluminescence properties of a compound depend on π-stacking arrangements; face to face, edge to face π-stacks show different photoluminescences. 46,47 Furthermore, the π-interactions of metallo−organic frameworks are modulated to show white-light emission. 48 The π-interactions of ligands are also useful in molecular recognition. 49 The low-nuclear complexes are the primary building constituents of many multinuclear complexes and noncovalent assemblies. Hence, diverse ways of weak interactions of small inorganic building blocks affecting photoluminescence properties are imperative. We choose here to study the sensing and the reactivity of mononuclear species shown in Scheme 1. This represents a mononuclear species suitable to form poly-nuclear complexes and has option for chemical and optical sensing of different substrates. Chemosensing by such a species would occur through several ways; out of them, three prominent ways are (i) improvisations of electronic effects of the metal ion, including possible redox-reaction causing chemical transformations; (ii) transformation of the aldehyde functional group of the 4-formylbenzoate to another functional group; (iii) utilization of the weak interactions to form self-assemblies. The species shown in Scheme 1 has also the qualities to form aggregates for aggregation-induced emission, or for intramolecular charge transfer, or exciplex to affect the fluorescence emission from itself or on another interacting species. Each of these is important to study the sensing ability of an analyte. The 4-formylbenzoate on the species is electron-withdrawing to extend its electronic effect to another fluorescent ligand of the complex through the intervening metal ion. The electronic effects of diamagnetic metal complexes possessing electron-rich and -deficient ligands cause signal transduction through intramolecular charge transfer. 50,51 Push−pull electronic effects of zinc complexes of multipolar ligands cause extensive solvatoemissive effects. 4,5 Wide applications of metallo−organic frameworks as optical materials and sensors make one curious to study discrete units of a framework to understand properties. 52,53 There are also many self-assembled aggregates comprising multiple neutral species of zinc, 54,55 manganese, 56 copper carboxylates. 57,58 Depending on the electronic configuration of the central metal-ion, the inherent magnetic properties of the metal ion directly influence the photoluminescence OFF or ON states. A diamagnetic 4formylbenzoate complex with 1,10-phenanthroline-based ligand would assist in intramolecular charge transfer, whereas a paramagnetic metal complex will be in general nonemissive. However, a nonemissive compound may be suitable for signal transductions through chemosensing upon concealing the metal ion or functionalization of the aldehyde functional group or other associative and dissociative processes. Hence, there are scopes to study chemosensing of those paramagnetic complexes of naturally abundant copper(II) ions by reacting with a mild reducing agent such as hydroxylamine. To understand the electronic effects and reactivity associated with the mononuclear model complexes of d 9 -copper, d 10 -zinc, and d 10 -cadmium possessing the features discussed above, sensing properties of 1,10-phenanthroline-containing complexes of copper(II), zinc(II), and cadmium(II) 4-formylbenzoate complexes are presented in this article ( Figure 1).

■ RESULTS AND DISCUSSION
Synthesis and Characterization of Zinc and Copper Formylbenzoate Complexes. The mononuclear complexes 1 and 2 shown in Scheme 2 are obtained from the reactions of 4-formylbenzoic acid with zinc(II) acetate or copper(II) acetate in the presence of 1,10-phenanthroline. The copper complex 1 is a six-coordinate; it has two monodentate carboxylates, one bidentate 1,10-phenanthroline along with a water molecule coordinating to the copper(II) ion. The complex adopts a distorted square-pyramidal geometry, in which one of the 4-formylbenzoate occupies the axial position and the rest of the ligands constitute the base of the square (Figure 1a). The planar base comprises an O-atom of water, an oxygen of formylbenzoate, two nitrogen atoms of 1,10phenanthroline each coordinating to a copper(II) ion. The Cu1−O2 and Cu1−O5 distances are 3.267, 3.302 Å, respectively, which indicate that the O2 and O5 atoms are not sufficiently close to form a copper oxygen bond. The bond distances of the two Cu−O bonds of the monodentate carboxylates, namely, Cu1−O1, 1.945 (4) Å and Cu−O4, 2.300 (4) Å are dissimilar. The axial bond of the square pyramid is a relatively longer Cu1−O4 bond than the other bonds because of the Jahn−Teller effect. The Cu1−O7 distance is 1.986(4) Å, and shows a strong binding of the water molecule to the copper ion. The coordinated water molecule is involved in intramolecular hydrogen bonds with the CO bonds of the carboxylate groups. The IR spectra of the complex have CO stretching for the aldehyde group at 1692 cm −1 and O−H stretching of water molecules at 3439 cm −1 . The carboxylate CO stretching appears at 1595 cm −1 . The electron spin resonance (ESR) spectra of the complex have a broad signal at g = 2.103 at room temperature; it shows copper is at the +2 oxidation state in the complex. Complex 1 is formed as the sole product in the reaction, as the recrystallized bulk material shows an identical powder X-ray diffraction (XRD) pattern as that of the theoretically generated powder XRD pattern from the crystallographic information file of complex 1.
The zinc complex 2 is a six-coordinate complex having two bidentate carboxylates and biscoordinating 1,10-phenanthroline ( Figure 1b). The Zn−O bond distances are in the range of 2.005−2.410 Å and the two Zn−N bonds are 2.097(2) and 2.109(3) Å, respectively, establishing their biscoordination modes to the zinc ion. The 1,10-phenanthroline-containing zinc carboxylate complexes may form mononuclear or dinuclear complexes depending on carboxylic acids. 59 The

ACS Omega
Article 1643 cm −1 . The aldehyde carbonyl CO stretching appears at 1702 cm −1 . The powder XRD of the bulk sample of the complex tallies with the one obtained from the crystallographic information file, which shows not only bulk purity of the sample but also confirms the single product obtained from the reaction.
Reactivity of 4-Formylbenzoic Acid toward Hydroxylamine in the Presence of Copper(II) Ions. When copper(II) acetate, 1,10-phenanthroline, and 4-formylbenzoic acid were reacted in 1:2:2 mole ratios followed by a reaction with 2 moles of hydroxylamine hydrochloride, an inclusion complex 3 was formed (Scheme 3). The complex has IR stretching at 3395 cm −1 because of the O−H group and at 1688 cm −1 because of the free carboxylate group. At room temperature, the complex shows a broad ESR signal at g = 2.095; which is characteristic of a d 9 electronic configuration, suggesting it to be a copper(II) complex. The cationic part of the complex comprises of a copper(II) ion coordinated to two bidentate 1,10-phenanthroline ligands and a chloride ligand. It has a distorted square pyramidal geometry. The charge of the complex cation is neutralized by a chloride ion located outside the coordination sphere ( Figure 2a). The cationic part has an umbrella-like shape, where the cover of the umbrella-like shape comprises the copper ion coordinating to two 1,10phenanthroline ligands and the rod of the umbrella-like shape is the copper−chloride bond. The symmetric nature of the cation with respect to mirror planes is reflected in the similar Cu1−N2 and Cu1−N3 bond distances of the two independent 1,10-phenanthroline ligands. The bond distances are Cu1−N2, 2.009 (3) Å and Cu1−N3, 2.095(2) Å, respectively. The Cu1−Cl1 bond distance is 2.298 (4) Å. The anionic portion of the self-assembly of the complex is an example of the utilization of three different aspects of supramolecular chemistry, namely (a) halide−water interactions, 60 Table S1) with the carboxylic acid groups of two independent molecules of oxime of the 4-formylbenzoic acid. The complex cations having an umbrella-like shape are located at these voids of about 403 Å 2 area ( Figure 2c). Oximes are well-known to form molecular complexes. 69,70 t-Butylammonium cation encapsulations by hydrogen bonded assemblies of halide with oxime were reported earlier by us. 71 Some oximes also get encapsulated in coordination polymers. 72,73 In the present case, the selfassembly of complex 3 has hydrated chloride ions that are hydrogen bonded to oximes providing spaces to encapsulate pentacoordinated copper(II) complex cations.
Excess amounts of hydroxylamine hydrochloride reacted with a mixture of copper(II) acetate, 4-formylbenzoic acid ,and 1,10-phenanthroline in a mole ratio of 1:1:1, providing a new c o m p l e x 4 ( Figu re 2b). T he complex h as 4-(hydroxycarbamoyl)benzoate (Scheme 3) as one of the ligands. The complex has IR stretching at 3403, 1721, and 1679 cm −1 because of stretching of the O−H, carbonyl, and carboxylate groups, respectively. At room temperature, this complex shows a broad ESR signal at g = 2.18, a characteristic feature of the copper(II) complex. Generally, hydroxylamine is a reducing agent for copper(II) in basic conditions but in the present reaction condition,s it did not cause a reduction. The complex has one 1,10-phenanthroline coordinating to a copper(II) ion, and an in situ formed 4-carboxyphenyloximate as the chelating ligand. The anionic carboxylate end of this ligand neutralizes the overall charge of the complex. The complex has a distorted square pyramidal geometry, where the d Cu−Cl is 2.613(1) Å. The base of the square pyramid comprises an O2N2 environment. The Cu1−N1 and Cu1− N2 bond distances are 1.989(3), 1.998 (3) Å, respectively, whereas the two Cu−O bond distances, namely, Cu1−O1 is 1.935(3) Å and Cu1−O2 Å is 1.937(3) Å. These distances are comparable to each other. Complex 4 was probably formed by attack of a water molecule on an oxime molecule formed in situ. Such a reaction generated the carboxy-oximate ligand that ligates to the copper(II) ion. Therefore, we have tested this possibility by carrying out the reaction in the presence of isotope labeled water, namely, H 2 18 O by following an identical reaction procedure used as in the synthesis of complex 4. As the product 4 obtained is in very small quantity, we examined the products formed in situ by mass spectrometry. To do so, we have analyzed the mass peaks ranging between 160 and 190 of the mass spectra of the samples from two independent experiments; one performed with water and the other with isotopic labeled water. There is a mass peak at 181.0758 because of the 4-(hydroxycarbamoyl)benzoic acid in the mass spectra of each reaction mixture of these two independent reactions. The intensity of the mass peak at 184.1159 is enhanced drastically in the mass spectra of the sample from the reaction mixture where isotopic labeled H 2 18 O was used ( Figure S13). This shows the incorporation of 18 O to 4-(hydroxycarbamoyl)benzoic acid whose m + 1 value fits to this value of mass. There are established examples where the copper(II) ion-mediated attack of an oxy-solvent on the CN bond of heterocyclic compounds 74 takes place, but we have difficulty in ascertaining this point in a completely convincing manner in the present case.
4-Formylbenzoate Complex of Cadmium(II). We had earlier suggested that compositions and structures of the cadmium benzoate complexes are highly dependent on the ancillary ligands as well as substituents. 75 It was also suggested that a poly-nuclear cadmium carboxylate complex may be a polymer in solid state but a monomer in solution. 76 These happen as a consequence of variable coordination numbers of cadmium ion deciding the respective self-assembly. There are examples of neutral zinc 54,55 molecular complexes where neutral complexes comprise similar ligands; but, in the present case, two independent compositions are held together by weak noncovalent interactions. Such complexes generate interest to study noncovalently linked self-assemblies of closely related dissimilar complexes. The reaction of cadmium(II) acetate with 4-formylbenzoic acid and 1,10-phenanthroline yielded an unusual molecular complex.

ACS Omega
Article diffraction pattern generated from the CIF file of the complex by using Mercury Software ( Figure S1). Hence, it is the only product formed in the reaction. We have re-dissolved the complex independently in different solvents and recrystallized, but we could not get crystals for the two independent components as a single species. The coordination number of cadmium in the dinuclear species is eight; which is six in the mononuclear part. The 1,10-phenanthroline ligands of both the neutral species are bidentate. The dinuclear unit has bidentate chelating formylbenzoate ligands, which also provide μ 1 -bridges to hold cadmium ions. This makes Cd 2 O 2 type of linkage by expanding the coordination number of cadmium to eight. Hence, the dinuclear species is a combination of two mononuclear units.
Utility of the Zinc and Cadmium Complex in Sensing of Nitroanilines. Many nitroaromatic compounds are toxic; 78 hence, their detections at low concentrations by abundant nontoxic metal ions may have utility. 18 Thus, it is necessary to differentiate the ability of detection of nitroaromatic compounds by the nontoxic zinc complex over the cadmium complex as cadmium ions are generally toxic. Furthermore, the zinc−salicylaldimine complex is able to detect nitroaromatics through photoluminescence quenching. 80 It suggests that a simple mononuclear zinc complex can serve such a purpose. In fact, there are examples of zinc complexes that detect nitroaromatics. 80−83 Having these existing facts in mind, complexes with high stability in solution prepared through simple synthetic procedures are essential for their utility as sensors. Furthermore, at ambient conditions, anilines are weak ligands. Hence, a sensing methodology based on weak interactions in the second coordination sphere would be more appropriate. 82,83 However, there are many examples of metal−organic frameworks showing excellent sensitivity toward nitroaromatics. 79 The examples of small metal complexes to do so are relatively less. 15−18 The fluorescence active zinc complex 2 as well as the cadmium complex 5 are structurally simple; they are easily synthesized. In an earlier study, we found that self-assembly of a molecular nickel complex was formed by weak interactions of a free pyridine molecule to hold multiple dissimilar nickel complexes. 84 These enthuses one to study assemblies of metal complexes to explore their aggregation in solution. Dynamic light scattering (DLS) studies of solutions of the two complexes in dimethylsulphoxide (DMSO) show that they are aggregates in solution (Supporting Information, Figure S17). The particles of the zinc complex and the cadmium complex in DMSO solution have an average size of 338.8 and 380.4 nm, respectively. The respective average particle sizes of the two complexes with 4-nitroaniline are 558.1 and 453.2 nm. Therefore, the aggregation behavior of these complexes changes in the presence of nitroaniline and there is an increase in sizes in both the cases. The 1 H NMR of complex 5 in solution is similar to the 1 H NMR of the mononuclear zinc(II) complex 2. This suggests that the two neutral species observed in the crystal structure of complex 5 are not distinguishable in solution. The presence of only one species in solution for 5 from 1 H NMR spectra, but observation on the two species with independent Cd-environments in the crystal structure, suggests the possibility of self-association. Definite evidence for aggregation equilibrium comes from the DLS results. The observed particle sizes from the DLS study for both the complexes are larger than the expected molecular weight for a mononuclear complex, showing that aggregation of the complexes takes place in solution. The aggregates formed in solution equilibrate with segregated species with smaller molecular weights. This could be a reason to obtain a mononuclear complex in the case of zinc and self-assembled species in the case of cadmium upon crystallization. In the latter case, the association through expansion of coordination is easy. In an earlier study, the crystal structure of a coordination polymer 76 of cadmium benzoate confirmed it to be a polymer but it remains as a monomer in solution. This happened because of segregation of the polymeric backbone in solution, by loss of side-on bridges offered by carboxylate ligands. 76,77 Solvent-dependent aggregation of zinc−benzoate complexes are also known. 84,85 In the present case, our attempts to get suitable ESI mass of low-molecular-weight complexes were not successful. The aggregation equilibrium is further supported by the fact that when 4-nitroaniline was added, the average particle sizes were increased.
The solution of complex 2 and complex 5 in DMSO emits at 411, 431, and 466 nm upon excitation at 385 nm but with different quantum yields. The ligand 1,10-phenanthroline is also very weakly emitting at those wavelengths, having a quantum yield of 0.030 in DMSO. The quantum yields of the zinc and cadmium complex in DMSO solutions are 0.012 and 0.082, respectively. Complex 2 and complex 5 are soluble in DMSO and dimethyl formamide but not soluble in acetonitrile, methanol, and water. Hence, emission spectra were measured in different mixed solvents to confirm the effect of the solvent to show any solvatoemissive effect. The quantum yields from different emission spectra of the complexes in different mixed solvents in DMSO are listed in Supporting Information Table S1. No shift in emission peaks occurred upon changing solvents except the intensity differences. Both the complexes have the highest respective photoluminescence quantum yield in DMSO. In each case, the cadmium complex showed a relatively higher value of quantum yield than the zinc complex. The emission peaks of the complexes are from the S 1 → S 0 transition of the 1,10-phenanthroline ligand where the vibrational contributions from v 0 → v 0 , v 0 → v 1 and v 0 → v 2 emissions are reflected as three independent but closely spaced emission peaks. Complexes 2 and 5 are metal complexes with d 10 -electronic configuration but have different ionic radii and electron affinities. Each has π-delocalized 1,10-phenanthroline heterocyclic fluorophore as one of the ligands. Hence, there are possibilities of charge-transfer from the ligand to electrondeficient nitroaromatic compounds. This effect caused quenching of emission of the two complexes upon interactions with nitroanilines. The excimer emissions of cadmium complexes in π-stacked systems modulate emission through stimuli. 43 In solution, the emissions of both the complexes get quenched by adding nitroanilines. Two representative cases of  Figure 4c,d. Apparently, no significant differences in the decreasing trend caused by the two metal complexes in the ratios of intensity of emission at a particular concentration (I) with respect to initial emission intensity (I 0 ) as a function of concentrations are observed from as compared to individual nitroaniline. However, the profiles of decreasing emissions of each nitroaniline differ from each other. This makes it clear that the quenching paths of the two metal complexes resemble. The differences in overall effect by the two metal complexes are from the quantum yields of the parent complexes. The cadmium complex has a relatively higher quantum yield but has apparently lower changes in intensities. The nonlinear decay in the value of I/I 0 in each profile as a function of increasing concentrations of respective nitroaniline was observed. Hence, in these detection processes, static quenching occurred, where ground states are not changed. This is also confirmed by carrying out independent 1 H NMR titrations of both the complexes with 4-nitroaniline (Supporting Information Figures S14 and S15). In these titrations, no shift in the chemical shift position of protons of the complexes or the 4-nitroaniline occurred. To understand the quenching paths, the emission spectra of 1,10-phenanthroline and 4formylbenzoic acid (385 nm excitation) were independently recorded. Both these compounds emit very weakly. The 1,10-phenanthroline weakly emits at 411, 435, and 465 nm, whereas the 4-formylbenzoic acid emits at 412 and 436 nm (Supporting Information Figure S19). The emission at 430 nm of 4formylbenzoic acid upon addition of an equivalent amount of zinc(II) chloride causes an increase in intensity and resulted in emission to complex 2. Addition of 4-nitroaniline to such a solution decreases the emission intensity. The 1,10-phenanthroline also showed a similar trend and the observations are apparently similar irrespective of the ligand or zinc or cadmium complex used in sensing. Control experiments on emission of 1,10-phenanthroline in solution upon addition of cadmium(II) chloride also provided similar observations; but differences in these experiments are the relative changes in the emission intensities. The results suggest a synergic electronic effect between the ligands mediated by the d 10 -metal ions but this effect is not a dominant in quenching. The d 10 -metal ions provide a template to push electron density, enhancing the transition probability of the weakly fluorescent ligand. From the crystal structures, it is also clear that the aggregations of the two complexes differ; but there is equilibration among the lowmolecular-weight species in solution; hence the emission wavelengths are at the same place for both the complexes. Solid samples of complex 2 and complex 5 have broad emission at 465 nm (λ ex = 385 nm) and the cadmium complex has a higher intensity. The copper(II) complexes are nonfluorescent because of fluorophore directly connected to the paramagnetic copper(II) ion. The crystal structures of the zinc complexes have C−H···π and C−H···O interactions in self-assembly ( Figure S16). However, the cadmium complex has extensive parallel co-facial π-stacking among the phenanthroline rings in solid state and the two neutral complexes are held in the lattice together by C−H···O interactions illustrated in Supporting Information Figure S17. The solid samples of

ACS Omega
Article the two complexes showed a triexponential emission decay profile in each case. The emission decay profile of the cadmium complex has equal distribution over those three paths. Among them, two paths have relatively short lifetimes, whereas 38.8% molecules follow a path of a relatively longer lifetime of 13.36 ns. The zinc complex has two short-lifetime paths by smaller fractions of molecules, and the major portions comprising 72.83% of molecules follow a slightly longer path of lifetime of 4.97 ns (Supporting Information Figures S11 and S12). The differences in the number of fractions of the longer lifetimes are indicative of the fractions of excimer-like emissions in the two cases because of packing differences. The cadmium complex has extensive parallel co-facial π-stacks, whereas the zinc complex has C−H···π interactions; these interactions provide definite arrangements to the fluorophores, which also contribute to the decay path with a longer lifetime.
As the ligand 1,10-phenanthroline itself shows a similar quenching process and similar emission as that of the complexes, a plausible mechanism shown in Figure 5a is proposed for the observed quenching based on the electronic levels of the ligands; a similar explanation is also applicable to metal complexes. Density functional theory (DFT) optimization of energies [using B3LYP functional and 6-31+G (d,p) basis set] of 1,10-phenanthroline and 4-nitroaniline show that the lowest unoccupied molecular orbital (LUMO) of 1,10phenanthroline has slightly higher energy than the LUMO of the 4-nitroaniline (ΔE 4 = 0.1085 eV). Upon excitation, an electron from S 0 of the 1,10-phenanthroline is excited to the S 1 state. As the difference of LUMOs of the donor 1,10phenanthroline and the acceptor 4-nitroaniline is small, the excited electron from the LUMO of the 1,10-phenanthroline is transferred easily to the LUMO of the 4-nitroaniline. This results in the quenching through excited-state charge transfer. The LUMO of aldehyde has substantial differences from the energy than the LUMO of 4-formylbenzoic acid (ΔE 5 = 0.9974 eV), whereas the energy difference between the respective LUMO of 4-nitroaniline and 4-formylbenzoic acid (ΔE 6 ) is 1.0759 eV. Nitroanilines quench fluorescence of perylenebased receptors, 86 enabling differentiation of positional isomers in a similar manner that we have observed with the present examples. The energy of the zinc complex is optimized by Gaussian software using the B3LYP functional and the 6-31+ +G (d,p) basis set. The highest occupied molecular orbital (HOMO)−LUMO are presented in Figure 5b, indicating that the HOMO is localized in the 1,10-phenanthroline ring whereas the LUMO is localized over the 4-formylbenzoate unit. The HOMO−LUMO energy gap in the zinc complex (2) is 2.812 eV (440.9 nm). This clearly indicates that an S 0 −S 1 excitation involves charge transfer from the donor site to the acceptor site of the complex and shows that there exists a push−pull path mediated by the intervening d 10 metal ions, which is anchoring the ligands having inherent electronwithdrawing and -releasing properties. Thus, exciplex formation of the nitroanilines with the metal complexes inhibited the excited electron to retrace the original path to the ground state of those complexes.
Among the three positional isomers, the highest quenching was caused by 4-nitroaniline. It is 35-fold higher than the corresponding emission quenching caused on the zinc complex by the metaisomer. The ortho-isomer has 2.5-times higher quenching ability than the meta-isomer. The higher quenching ability of 4-nitroaniline is attributed to the resonance forms of nitroaniline and iminoquinone structures shown in Figure 5c.

Article
The non-aromatic electron-deficient nature of the iminoquinone makes it a better acceptor for efficient quenching.
The detection limits for the three positional isomers of nitroaniline determined from the fluorescence titrations are listed in Table 1. These show that the zinc(II) complex has a superior detection limit over the cadmium complexes for the three isomers. The 2-amino-5-nitrophenol ( Figure S7) is also an excellent quencher of the two complexes. These results complement the quenching of emission through O···π interactions on cobalt(II) 17 and nickel(II) 18 1,10-phenanthroline complexes responsible in photoluminescence quenching by nitroaromatic compounds. The present complexes have the advantages of having simple structures and are readily soluble in DMSO and dimethylformamide (DMF); they are also easily synthesized from commercially available reagents. Though the present system is based on a relatively low quantum yield, their scopes exist to develop more improvised system based on transition-metal complexes based on the foundations provided here.

■ CONCLUSIONS
The reactivity and sensing of structurally simple complexes of the 1,10-phenanthroline ligand containing copper, zinc, and cadmium 4-formylbenzoate complexes are depicted. The study provided the fundamental understanding on the quenching of emission of 1,10-phenanthroline and the two d 10 metal ion complexes to be through the transfer of excited from excited state to the nitroanilines. The possible push−pull electronic effects of the donor and acceptor ligands are reflected in the theoretically demonstrated zinc complex where the LUMO is localized on the 1,10-phenanthroline ligand, whereas LUMO is localized at the 4-formylbenzoate part. Besides all these structural aspects, an unusual molecular complex of cadmium is also serendipitously isolated and characterized. This complex has two neutral cadmium complexes self-assembled through C−H···π and C−H···O interactions. The DLS experiments have shown that the zinc and cadmium complexes form aggregates in solution and the particle sizes of such aggregates are increased upon interactions with nitroaniline. Both those complexes are useful in the efficient detection of nitroanilines.
The paramagnetic copper complexes studied in this study are unsuitable for fluorescence detection of analytes, but they provided fundamental understandings on the reactivity of hydroxylamine, which is a conventional volatile pollutant and mild reducing agent. The packing pattern determined from the crystal structure of a copper(II) formylbenzoate complex possesses complex cations encapsulated in self-assembly of oximes with hydrated-chloride ions. The packing of the complex does not have direct interactions between oxime and carboxylic acid but hydrated-chloride ions provided the charge-assisted hydrogen bonds with the oxime functional

ACS Omega
Article group to form an assembly. Such an assembly assisted by water molecules has a direct implication on understanding a way of formation of water-mediated aggregation of anions with neutral components. Beyond those results, an exceptional copper 4-(hydroxycarbamoyl)benzoate complex is isolated and characterized from the copper(II)-mediated oximation reaction, which has a definite role in further developing chemosensing properties to detect volatile organic compounds, more precisely hydroxylamine hydrochloride.

■ EXPERIMENTAL SECTION
General. Infrared spectra of the solid samples were recorded on a PerkinElmer Spectrum One FT-IR spectrophotometer by making KBr pellets. Powder XRD patterns were recorded using a Bruker powder X-ray diffractometer D2 phaser instrument. 1 H NMR spectra were recorded on a BRUKER Ascend-600 MHz NMR spectrometer using TMS as the internal standard. A PerkinElmer LAMDA-750 spectrometer was used to record the solid-state UV−visible spectra by diffuse reflectance. Fluorescence emissions were measured in a Horiba Jobin Yvon FluoroMax-4 spectrofluorometer by taking definite amount of solutions or definite amounts of the solid sample and exciting at the required wavelength. Electron paramagnetic resonance spectra were recorded on a JES-FA200 ESR spectrometer at room temperature, with a microwave power of 0.998 mW, microwave frequency of 9.14 GHz, and modulation amplitude of 2. DLS experiments were carried out on a Malvern Zeta sizer Nano ZS instrument equipped with a 4.0 mW He−Ne laser operating at 633 nm.
The detection limits for the positional isomers of nitroaniline were calculated from the formula: detection limit = 3σ/k, where σ is the standard deviation in blank measurements and k is the slope from the plot between the fluorescence emission intensity against concentration of the respective nitroaniline. For such measurements, the fluorescence emission spectra of complex 2 and complex 5 were measured 10 times and the standard deviation of the measurements was determined. The slope was obtained from the independent plot of intensity of emission at 435 nm of the complex versus concentration of the respective nitroaniline. The quantum yields in solutions were determined from the integrated areas of emission based on quinine sulphate as the standard.
Crystallographic Study. Single-crystal XRD data for complexes 2 and 5 were collected at 296 K with Mo Kα radiation (λ = 0.71073 Å) by a Bruker Nonius SMART APEX CCD diffractometer equipped with a graphite monochromator and an Apex CCD camera, whereas data for complex 1, 3, and 4 were collected on an Oxford SuperNova diffractometer. Data reductions and cell refinement for data obtained from an Oxford diffractometer were performed by CrysAlisPro software and from a Bruker Nonius diffractometer were performed using SAINT and XPREP software. Structures were solved by a direct method and were refined by full-matrix least-squares on F 2 using SHELXL-2014 software. All nonhydrogen atoms were refined in anisotropic approximation against F 2 of all reflections. The hydrogen atoms were placed at their geometric positions by riding and refined by isotropic approximation. From the data collected at room temperature the disorder of the oxygen atoms of the aldehydes in complex 1 and short contacts between two hydrogen atoms of molecules of water of crystallization in the structure of complex 4 could not be resolved. The crystallographic parameters of the complexes are listed in Table 2. (1,10-Phenanthroline)bis(4-formylbenzoate)zinc(II) (2). The zinc complex 2 was synthesized in an identical procedure as that of complex 1, but in this case dimethylacetamide was used as solvent, and zinc(II) acetate dihydrate (219 mg, 1 mmol) was used instead of copper(II) acetate. Upon crystallization, dirty-white crystals of complex 2 were isolated in 67% yield. 1  Copper(II) Complex of 4-(Hydroxycarbamoyl)benzoic Acid (4). It was prepared in a similar procedure as that of complex 3; but in this case the hydroxylamine was generated for the reaction in situ by adding sodium acetate. A solution of 4-formylbenzoic acid (300 mg, 2 mmol) and 1,10-phenanthroline (99 mg, 0.5 mmol) in methanol, copper(II) acetate monohydrate (199 mg, 1 mmol) was reacted with hydroxylamine hydrochloride (690 mg, 10 mmol). To this solution, sodium acetate (500 mg, 6 mmol) was added; the solution turned from green to red and finally to a dark-blue color. The precipitate formed was dissolved in water (10 mL) and kept undisturbed for crystallization. Few dark-blue crystals of complex 4 were obtained from a mixture of crystals. The other crystals were not of good diffracting quality, and upon recrystallization from DMF gave crystals of bis(1,10phenanthroline)(chloro)copper(II) chloride. DMF (confirmed by comparing by single-crystal XRD) 34  Molecular Complex of (1,10-Phenanthroline)bis(4formylbenzoate)cadmium(II) (5). The cadmium complex 4 was prepared by an identical procedure as that of zinc complex 2 but cadmium(II) acetate dihydrate (266 mg, 1 mmol) was