Ni-Catalyzed Reductive Liebeskind–Srogl Alkylation of Heterocycles

Herein we present a Ni-catalyzed alkylation of C–SMe with alkyl bromides for the decoration of heterocyclic frameworks. The protocol, reminiscent to the Liebeskind–Srogl coupling, makes use of simple C(sp2)–SMe to be engaged in a reductive coupling. The reaction is suitable for a preponderance of highly valuable heterocyclic motifs. In addition to cyclic bromides, noncyclic alkyl bromides are well accommodated with exquisite levels of retention over isomerization. The protocol is scalable and permits orthogonal couplings in the presence of other functionalization handles.

T he functionalization of heterocycles via cross-coupling has become a powerful tool toward the diversification of biologically active compounds. 1 In this context, the vast majority of electrophiles utilized rely primarily on the use of a heteroaryl halide as coupling partner due to its large availability. 2 Nevertheless, in certain occasions, issues arising from stability and fast hydrolysis rates of heteroaryl halides had led to a reconsideration of such couplings and alternatives have been investigated. 3 In this sense, the venerable Liebeskind− Srogl (L−S) coupling opened the door to the use of robust and stable C−SMe bonds as handles for C(sp 2 )−C(sp 3 ) coupling utilizing boronic acids ( Figure 1A). 4 This approach has proven highly versatile in the derivatization of heteroaromatic groups as well as thioester derivatives. 5 The widespread presence of thioether as modification handles has led to the development of a wide variety of cross-coupling strategies with a breadth of different organometallic reagents. 6,7 Indeed, the majority of reported methods require the use of a prefunctionalized alkyl nucleophile, thus requiring several steps of synthesis for its preparation and, in some instances, the tolerance of functionality becomes a synthetic hurdle. Hence, alternatives to efficiently forge such bonds in a straightforward fashion would be highly desirable.
Recently, reductive cross-couplings between two electrophiles have arisen as powerful, simple and practical strategies to circumvent the preparation of reactive organometallic reagents ( Figure 1B). 8 Albeit a plethora of methodologies have been reported in this area, the vast majority have focused on the use of aryl halides or pseudohalides where the C(sp 2 )−X bond is polarized due to the electronegative nature of the X element (inductive effect). 9 On the other hand, reductive couplings with C(sp 2 )−X, where X is electronically contributing to the aryl ring via additional resonance effects through the lone pair pose a significant challenge and still remain elusive. 10 Contrarily to the activation of simple aryl (pseudo)halides, C(sp 2 )−SMe bonds require highly nucleophilic catalysts for its activation. This results in chemoselectivity issues arising from the alkyl halide counterpart ultimately leading to undesired side-reactivity. Consequently, a fine compromise between reactivity and selectivity is crucial if this reductive coupling is to be realized. Additionally, the tendency of SMe anions to tightly bind to metal centers also poses a potential hurdle for achieving catalytic turnover without poisoning the metal catalyst. 11 As part of our program on developing catalytic strategies for the modification of heterocyclic frameworks, 12 we envisaged that a catalytic reductive cross-coupling between heteroaromatic thioethers and simple alkyl bromides would be highly beneficial for synthetic purposes. 13 Herein, we report a practical and efficient Ni-catalyzed protocol based on the activation of C−SMe bonds, which are primed for reductive cross-coupling with a variety of secondary alkyl bromides (Scheme 1C). The method is characterized by the presence of a variety of aromatic heterocycles, thus permitting rapid decoration of pharmaceutically relevant scaffolds. The utility of this protocol is demonstrated by the facile scalability to gramscale and the sequential modification of a heterocyclic framework via orthogonal couplings.
On the basis of their great catalytic activity in reductive cross-electrophile couplings, we started our investigations exploring the use of a Ni catalyst in the presence of a reducing agent. Initially, thiomethyl ether 1 and CyBr (2) were used as model substrates for the coupling. 14 We anticipated that an electron-rich ligand for the Ni would be necessary for the activation of the strong C−SMe bond. Indeed, catalytic amounts of NiBr 2 ·diglyme and dppf in the presence of Zn (2.5 equiv) and K 2 HPO 4 (2.0 equiv) afforded the desired C−C product 3 in 72% isolated yield (Table 1, entry 1).
As highlighted in the optimization studies, omission of molecular sieves led to a slight decrease on the yield (Table 1, entry 2). Moreover, the basicity of the additive utilized seemed a crucial element as demonstrated by the lower yields obtained when tri-or monobasic phosphates of potassium were used (entries 4 and 5). Interestingly, the use of Mn in place of Zn as reducing agent completely suppressed the reactivity (entry 6). Other NiCl 2 salts bearing glyme instead of diglyme also led to lower conversion and yield (entry 7). The low yields of 3 obtained when using Fc-P(Cy 2 ) 2 highlight the crucial electronic aspects of dppf for successful catalysis (entry 8). The use of a bidentate phosphine with a wider bite angle such as Xantphos also afforded the desired product 3 albeit in much lower yields, thus suggesting the need for a rigid cis-chelating phosphine (entry 9). As anticipated, the use of commonly utilized dinitrogenated ligands such as dtbpy led to traces of C−C formation (entry 10). 8 Finally, lower temperatures reduced dramatically the amount of cross-coupling product (entry 11).

Journal of the American Chemical Society
Communication bromides bearing aromatic groups (30), esters (32), protected alcohols (31, 33) and amines (34). Alkyl bromides bearing heterocyclic furan (35) and thiophene esters (36) smoothly coupled with good yields. Unfortunately, tertiary alkyl bromides could not be accommodated. The use of other thioethers bearing longer alkyl chains in place of Me also could be accommodated as highlighted by the reaction of 37 and 38. It is important to mention that when a bis-aryl thioether is utilized (39), high regioselectivity in the C−S cleavage event was observed in favor of the benzothiazole unit. The scalability of the process was investigated as exemplified in Figure 2A: at 10 mmol scale, 1 and 2 successfully afforded gram-quantities of the desired C−C bond with minimal erosion of the yield.
To test the translational potential of our method in pharmaceutically relevant contexts, we applied the reductive protocol to the modification of the benzothiazole core, a prevalent motif in a wide variety of biologically active compounds. 17 As shown in Figure 2B, after successful reductive alkylation (88%), benzothiazole thioether 40 could be further modified at its C(sp 2 )−F through Sawamura's Nicatalyzed amination to afford 81% of the drug-like scaffold 41. 18 In the same manner, piperidyl derivative selectively reacted with 40 to afford excellent yields of C−C coupling (71%). Subsequently, a more nucleophilic primary amine could also be incorporated through C−F amination to afford the complex target 42 in 43% without further optimization.
Intrigued by the high levels of retention over isomerization with the use of dppf, a series of mechanistic investigations were performed. Albeit the low reactivity of primary alkyl bromides, we conducted the coupling of cyclopropylmethyl bromide to explore possible ring-opening events ( Figure 3A). Indeed, 43-D and 43-O were obtained in 1:2 ratio, respectively. This result suggests the involvement of carbon-centered alkyl radical species during the course of the reaction. Additionally, the presence of radical scavengers such as TEMPO and 1,1diphenylethylene was also investigated ( Figure 3B). Whereas the presence of 1 equiv of TEMPO led to a dramatic decrease in yield of 3, 2 equiv of TEMPO completely suppressed the reactivity. This inhibition could be the result of the interaction with Ni or Zn. However, 1,1-diphenylethylene was used instead, formation of product (3, 19%) was accompanied by the formation of 44 and 44-H 2 . Although these results might point out to noncage events of the alkyl radical, experiments with a 5-exo-trig cyclization suggest otherwise. If a radical-chain process is operating, the formation of uncyclized product should augment when increasing the amount of Ni. 9f However, the ratio of uncyclized (46-U) and cyclized (46-C) crosscoupled product remained unaffected at higher concentrations of catalyst (ca. 1:1.5). Interestingly, when Zn was replaced by the common organic reducing agent TDAE (tetrakis-(dimethylamino)ethylene), no product was obtained ( Figure  4A). Due to the unique reactivity of Zn in this system, we speculated whether an organozinc reagent was formed in situ. 19 Precedents in Pd-catalyzed Negishi aryl-alkyl cross-coupling clearly demonstrated a strong effect of the phosphine ligands in the isomerization of the nucleophile. 16,20 Similarly, reports on the use of Ni as catalyst for Negishi couplings are restricted to di-or triamine based ligands to obtain high levels of selectivity. 21 On the basis of these precedents, we speculated that in the event of forming a well-defined organozinc reagent during the reaction the ratios of branched and linear products should be highly dependent on the ancillary ligand used. To test this hypothesis, we subjected 1 to the coupling with (2bromopropyl)benzene and the homologue zinc reagent in the presence of dppf ligand. Interestingly, the coupling of (2bromopropyl)benzene under reductive conditions afforded exclusively the branched product 30-B independently of the phosphine ( Figure 4B). On the contrary, the reaction of (1phenylpropan-2-yl)zinc(II) bromide under the same conditions afforded mixtures of 30-B and 30-L(1.5:1), thus ruling

Journal of the American Chemical Society
Communication out well-defined organozinc halides as intermediates. Taken together, these preliminary investigations suggest that the Ni is responsible for the radical formation and fast cage-rebound occurs. 22 Additionally, the no-isomerization observed with open chain secondary centers point out to a fast reductive elimination from higher oxidation states of a Ni/phosphine complex. 23 Efforts to elucidate these intriguing phosphine-Ni intermediate species are currently under investigation.
In summary, we have developed a Ni-catalyzed protocol for the direct alkylation of thiomethyl ethers (C(sp 2 )−SMe bonds) derived from heterocycles, which represent important handles commonly encountered in medicinal chemistry routes. This protocol has a wide substrate scope in both coupling partners and a high functional group tolerance. The high selectivity obtained toward the branched isomer with the use of simple dppf reveal interesting mechanistic scenarios which might differ from the canonical reductive cross-electrophile couplings. The successful coupling of strong C(sp 2 )−SMe bonds in cross-electrophile couplings opens the door to the use of other challenging partners with strong bonds to be included in the palette of electrophiles.

■ ACKNOWLEDGMENTS
Financial support for this work was provided by Max-Planck-Gesellschaft, Max-Planck-Institut fur Kohlenforschung and Fonds der Chemischen Industrie (FCI-VCI). We thank Prof. Dr. A. Furstner for discussions and generous support. We also thank Elitenetzwerk Bayern (SYNCAT, fellowship J.C.).